linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: tony@atomide.com (Tony Lindgren)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 0/6] add support for omap wake-up interrupts via pinctrl-single
Date: Wed, 2 Oct 2013 22:40:00 -0700	[thread overview]
Message-ID: <20131003054000.GK8949@atomide.com> (raw)
In-Reply-To: <20131003051049.8444.16913.stgit@localhost>

* Tony Lindgren <tony@atomide.com> [131002 22:25]:
> Hi all,
> 
> Here's a respin of the pinctrl-single related patches to
> use chained irq as suggested by Linus W earlier. This series
> does not try to provide any generic automated solution yet,
> but works by doing a request_irq() for the wake-up pin, so
> it should be flexible enough for both manual control and
> automated solution.
> 
> This series removes the last nasty blocker for making omap3
> to be device tree only without causing nasty PM regressions.
> 
> Assuming Linus W acks the drivers/pinctrl parts, I can
> provide those three patches in a separate immutable branch
> against v3.12-rc3 for Linus W to pull so I can merge them in
> too.
> 
> This series is based on my earlier series "[PATCH 0/4] Clean
> up legacy platform data handling for omaps for v3.13" as
> it has a dependency for the pdata quirks for passing the
> auxdata to the driver.

Sorry I had some typos in my Cc addresses and this series
did not get fully sent. Will resend it, sorry for the noise.
 
> Regards,
> 
> Tony
> 
> ---
> 
> Tony Lindgren (6):
>       ARM: dts: Fix pinctrl mask for omap3
>       ARM: OMAP2+: Add support for auxdata
>       pinctrl: single: Prepare for supporting SoC specific features
>       pinctrl: single: Add support for wake-up interrupts
>       pinctrl: single: Add support for auxdata
>       ARM: OMAP: Move DT wake-up event handling over to use pinctrl-single-omap
> 
> 
>  .../devicetree/bindings/pinctrl/pinctrl-single.txt |   11 +
>  arch/arm/boot/dts/omap3.dtsi                       |    8 
>  arch/arm/boot/dts/omap4.dtsi                       |    4 
>  arch/arm/mach-omap2/board-generic.c                |    5 
>  arch/arm/mach-omap2/common.h                       |    3 
>  arch/arm/mach-omap2/mux.c                          |    8 
>  arch/arm/mach-omap2/mux.h                          |    4 
>  arch/arm/mach-omap2/pdata-quirks.c                 |   29 +-
>  arch/arm/mach-omap2/prm3xxx.h                      |    8 
>  arch/arm/mach-omap2/prm44xx_54xx.h                 |    8 
>  arch/arm/mach-omap2/prm_common.c                   |   11 +
>  drivers/pinctrl/pinctrl-single.c                   |  386 ++++++++++++++++++++
>  include/dt-bindings/pinctrl/omap.h                 |    4 
>  include/linux/platform_data/pinctrl-single.h       |   12 +
>  14 files changed, 474 insertions(+), 27 deletions(-)
>  create mode 100644 include/linux/platform_data/pinctrl-single.h
> 
> -- 
> Signature
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

      parent reply	other threads:[~2013-10-03  5:40 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-10-03  5:16 [PATCH 0/6] add support for omap wake-up interrupts via pinctrl-single Tony Lindgren
2013-10-03  5:16 ` [PATCH 1/6] ARM: dts: Fix pinctrl mask for omap3 Tony Lindgren
2013-10-03  5:17 ` [PATCH 2/6] ARM: OMAP2+: Add support for auxdata Tony Lindgren
2013-10-03  5:40 ` Tony Lindgren [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20131003054000.GK8949@atomide.com \
    --to=tony@atomide.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).