From mboxrd@z Thu Jan  1 00:00:00 1970
From: mturquette@linaro.org (Mike Turquette)
Date: Mon, 07 Oct 2013 18:28:59 -0700
Subject: [PATCH v3 3/3] clk: keystone: Build Keystone clock drivers
In-Reply-To: <1380158295-30629-4-git-send-email-santosh.shilimkar@ti.com>
References: <1380158295-30629-1-git-send-email-santosh.shilimkar@ti.com>
 <1380158295-30629-4-git-send-email-santosh.shilimkar@ti.com>
Message-ID: <20131008012859.7445.26447@quantum>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

Quoting Santosh Shilimkar (2013-09-25 18:18:15)
> Now build the keystone common clock drivers. The build is made
> conditional based on COMMON_CLK_KEYSTONE
> 
> Cc: Mike Turquette <mturquette@linaro.org>
> 
> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
> ---
>  drivers/clk/Kconfig           |    7 +++++++
>  drivers/clk/Makefile          |    1 +
>  drivers/clk/keystone/Makefile |    1 +
>  3 files changed, 9 insertions(+)
>  create mode 100644 drivers/clk/keystone/Makefile
> 
> diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
> index 279407a..10f85cc 100644
> --- a/drivers/clk/Kconfig
> +++ b/drivers/clk/Kconfig
> @@ -93,6 +93,13 @@ config CLK_PPC_CORENET
>           This adds the clock driver support for Freescale PowerPC corenet
>           platforms using common clock framework.
>  
> +config COMMON_CLK_KEYSTONE
> +       tristate "Clock drivers for Keystone based SOCs"
> +       depends on ARCH_KEYSTONE && OF
> +       ---help---
> +          Supports clock drivers for Keystone based SOCs. These SOCs have local
> +         a power sleep control module that gate the clock to the IPs and PLLs.
> +
>  endmenu
>  
>  source "drivers/clk/mvebu/Kconfig"
> diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
> index 7b11106..2a44d533 100644
> --- a/drivers/clk/Makefile
> +++ b/drivers/clk/Makefile
> @@ -32,6 +32,7 @@ obj-$(CONFIG_ARCH_VT8500)     += clk-vt8500.o
>  obj-$(CONFIG_ARCH_ZYNQ)                += zynq/
>  obj-$(CONFIG_ARCH_TEGRA)       += tegra/
>  obj-$(CONFIG_PLAT_SAMSUNG)     += samsung/
> +obj-$(CONFIG_COMMON_CLK_KEYSTONE)      += keystone/

Thanks for respinning these patches Santosh. They look good and I've
taken them into clk-next for 3.13.

My only question: why CONFIG_COMMON_CLK_KEYSTONE and not just
CONFIG_ARCH_KEYSTONE above? This is not a blocking issue and can be
revisited later.

Regards,
Mike

>  
>  obj-$(CONFIG_X86)              += x86/
>  
> diff --git a/drivers/clk/keystone/Makefile b/drivers/clk/keystone/Makefile
> new file mode 100644
> index 0000000..0477cf6
> --- /dev/null
> +++ b/drivers/clk/keystone/Makefile
> @@ -0,0 +1 @@
> +obj-y                  += pll.o gate.o
> -- 
> 1.7.9.5