[GIT PULL 0/8] Renesas ARM based SoC updates for v3.13

[GIT PULL 0/8] Renesas ARM based SoC updates for v3.13

[Simon Horman]

Hi Kevin, Olof and Arnd,

please consider these Renesas ARM based SoC updates for v3.13.

This pull-request is based on v3.12-rc1.


The following changes since commit 272b98c6455f00884f0350f775c5342358ebb73f:

  Linux 3.12-rc1 (2013-09-16 16:17:51 -0400)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git soc

for you to fetch changes up to f39d35fcc2cd7a24ec3128adffd7876953999e1f:

  ARM: shmobile: r8a7778: add usb phy power control function (2013-09-30 16:11:23 +0900)

----------------------------------------------------------------
Renesas ARM based SoC updates for v3.13

* Add support for r8a7791 SoC
* Rename DU device in clock lookups list of r8a7779 SoC
* USB and SSI/SRU clock support for r8a7778 SoC
* USB phy power control function support for r8a7778 SoC

----------------------------------------------------------------
Hisashi Nakamura (1):
      ARM: shmobile: Initial r8a7791 SoC support

Kuninori Morimoto (3):
      ARM: shmobile: r8a7778: add SSI/SRU clock support
      ARM: shmobile: r8a7778: add USBHS clock
      ARM: shmobile: r8a7778: add usb phy power control function

Laurent Pinchart (2):
      ARM: shmobile: r8a7779: Rename DU device in clock lookups list
      ARM: shmobile: r8a7790: Add DU and LVDS clocks

Magnus Damm (1):
      ARM: shmobile: r8a7791 CMT support

Yoshikazu Fujikawa (1):
      ARM: shmobile: r8a7791 SCIF support

 arch/arm/boot/dts/r8a7791.dtsi                |  41 +++++
 arch/arm/mach-shmobile/Kconfig                |   6 +
 arch/arm/mach-shmobile/Makefile               |   2 +
 arch/arm/mach-shmobile/clock-r8a7778.c        |  44 ++++-
 arch/arm/mach-shmobile/clock-r8a7779.c        |   2 +-
 arch/arm/mach-shmobile/clock-r8a7790.c        |  12 +-
 arch/arm/mach-shmobile/clock-r8a7791.c        | 237 ++++++++++++++++++++++++++
 arch/arm/mach-shmobile/include/mach/r8a7778.h |   2 +
 arch/arm/mach-shmobile/include/mach/r8a7791.h |   8 +
 arch/arm/mach-shmobile/setup-r8a7778.c        |  37 ++--
 arch/arm/mach-shmobile/setup-r8a7791.c        | 149 ++++++++++++++++
 11 files changed, 525 insertions(+), 15 deletions(-)
 create mode 100644 arch/arm/boot/dts/r8a7791.dtsi
 create mode 100644 arch/arm/mach-shmobile/clock-r8a7791.c
 create mode 100644 arch/arm/mach-shmobile/include/mach/r8a7791.h
 create mode 100644 arch/arm/mach-shmobile/setup-r8a7791.c

[PATCH 1/8] ARM: shmobile: r8a7779: Rename DU device in clock lookups list

[Simon Horman]

From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

The DU device will be called rcar-du-r8a7779. Rename the clock lookup
entry accordingly.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/clock-r8a7779.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/mach-shmobile/clock-r8a7779.c b/arch/arm/mach-shmobile/clock-r8a7779.c
index bd6ad92..1f7080f 100644
--- a/arch/arm/mach-shmobile/clock-r8a7779.c
+++ b/arch/arm/mach-shmobile/clock-r8a7779.c
@@ -200,7 +200,7 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP322]), /* SDHI1 */
 	CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP321]), /* SDHI2 */
 	CLKDEV_DEV_ID("sh_mobile_sdhi.3", &mstp_clks[MSTP320]), /* SDHI3 */
-	CLKDEV_DEV_ID("rcar-du.0", &mstp_clks[MSTP103]), /* DU */
+	CLKDEV_DEV_ID("rcar-du-r8a7779", &mstp_clks[MSTP103]), /* DU */
 };
 
 void __init r8a7779_clock_init(void)
-- 
1.8.4

[PATCH 2/8] ARM: shmobile: r8a7790: Add DU and LVDS clocks

[Simon Horman]

From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/clock-r8a7790.c | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mach-shmobile/clock-r8a7790.c b/arch/arm/mach-shmobile/clock-r8a7790.c
index fc36d3d..d99b87b 100644
--- a/arch/arm/mach-shmobile/clock-r8a7790.c
+++ b/arch/arm/mach-shmobile/clock-r8a7790.c
@@ -182,7 +182,7 @@ static struct clk div6_clks[DIV6_NR] = {
 /* MSTP */
 enum {
 	MSTP813,
-	MSTP721, MSTP720,
+	MSTP726, MSTP725, MSTP724, MSTP723, MSTP722, MSTP721, MSTP720,
 	MSTP717, MSTP716,
 	MSTP522,
 	MSTP315, MSTP314, MSTP313, MSTP312, MSTP311, MSTP305, MSTP304,
@@ -193,6 +193,11 @@ enum {
 
 static struct clk mstp_clks[MSTP_NR] = {
 	[MSTP813] = SH_CLK_MSTP32(&p_clk, SMSTPCR8, 13, 0), /* Ether */
+	[MSTP726] = SH_CLK_MSTP32(&zx_clk, SMSTPCR7, 26, 0), /* LVDS0 */
+	[MSTP725] = SH_CLK_MSTP32(&zx_clk, SMSTPCR7, 25, 0), /* LVDS1 */
+	[MSTP724] = SH_CLK_MSTP32(&zx_clk, SMSTPCR7, 24, 0), /* DU0 */
+	[MSTP723] = SH_CLK_MSTP32(&zx_clk, SMSTPCR7, 23, 0), /* DU1 */
+	[MSTP722] = SH_CLK_MSTP32(&zx_clk, SMSTPCR7, 22, 0), /* DU2 */
 	[MSTP721] = SH_CLK_MSTP32(&p_clk, SMSTPCR7, 21, 0), /* SCIF0 */
 	[MSTP720] = SH_CLK_MSTP32(&p_clk, SMSTPCR7, 20, 0), /* SCIF1 */
 	[MSTP717] = SH_CLK_MSTP32(&zs_clk, SMSTPCR7, 17, 0), /* HSCIF0 */
@@ -251,6 +256,11 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_CON_ID("ssprs",		&div6_clks[DIV6_SSPRS]),
 
 	/* MSTP */
+	CLKDEV_ICK_ID("lvds.0", "rcar-du-r8a7790", &mstp_clks[MSTP726]),
+	CLKDEV_ICK_ID("lvds.1", "rcar-du-r8a7790", &mstp_clks[MSTP725]),
+	CLKDEV_ICK_ID("du.0", "rcar-du-r8a7790", &mstp_clks[MSTP724]),
+	CLKDEV_ICK_ID("du.1", "rcar-du-r8a7790", &mstp_clks[MSTP723]),
+	CLKDEV_ICK_ID("du.2", "rcar-du-r8a7790", &mstp_clks[MSTP722]),
 	CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP204]),
 	CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP203]),
 	CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP206]),
-- 
1.8.4

[PATCH 3/8] ARM: shmobile: r8a7778: add SSI/SRU clock support

[Simon Horman]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

Add a platform clock for the r8a7778 SRU/SSI sound.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/clock-r8a7778.c | 43 ++++++++++++++++++++++++++++++++--
 1 file changed, 41 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-shmobile/clock-r8a7778.c b/arch/arm/mach-shmobile/clock-r8a7778.c
index c4bf2d8..244a8de 100644
--- a/arch/arm/mach-shmobile/clock-r8a7778.c
+++ b/arch/arm/mach-shmobile/clock-r8a7778.c
@@ -69,6 +69,15 @@ static struct clk extal_clk = {
 	.mapping = &cpg_mapping,
 };
 
+static struct clk audio_clk_a = {
+};
+
+static struct clk audio_clk_b = {
+};
+
+static struct clk audio_clk_c = {
+};
+
 /*
  * clock ratio of these clock will be updated
  * on r8a7778_clock_init()
@@ -100,18 +109,23 @@ static struct clk *main_clks[] = {
 	&p_clk,
 	&g_clk,
 	&z_clk,
+	&audio_clk_a,
+	&audio_clk_b,
+	&audio_clk_c,
 };
 
 enum {
 	MSTP331,
 	MSTP323, MSTP322, MSTP321,
+	MSTP311, MSTP310,
+	MSTP309, MSTP308, MSTP307,
 	MSTP114,
 	MSTP110, MSTP109,
 	MSTP100,
 	MSTP030,
 	MSTP029, MSTP028, MSTP027, MSTP026, MSTP025, MSTP024, MSTP023, MSTP022, MSTP021,
-	MSTP016, MSTP015,
-	MSTP007,
+	MSTP016, MSTP015, MSTP012, MSTP011, MSTP010,
+	MSTP009, MSTP008, MSTP007,
 	MSTP_NR };
 
 static struct clk mstp_clks[MSTP_NR] = {
@@ -119,6 +133,11 @@ static struct clk mstp_clks[MSTP_NR] = {
 	[MSTP323] = SH_CLK_MSTP32(&p_clk, MSTPCR3, 23, 0), /* SDHI0 */
 	[MSTP322] = SH_CLK_MSTP32(&p_clk, MSTPCR3, 22, 0), /* SDHI1 */
 	[MSTP321] = SH_CLK_MSTP32(&p_clk, MSTPCR3, 21, 0), /* SDHI2 */
+	[MSTP311] = SH_CLK_MSTP32(&p_clk, MSTPCR3, 11, 0), /* SSI4 */
+	[MSTP310] = SH_CLK_MSTP32(&p_clk, MSTPCR3, 10, 0), /* SSI5 */
+	[MSTP309] = SH_CLK_MSTP32(&p_clk, MSTPCR3,  9, 0), /* SSI6 */
+	[MSTP308] = SH_CLK_MSTP32(&p_clk, MSTPCR3,  8, 0), /* SSI7 */
+	[MSTP307] = SH_CLK_MSTP32(&p_clk, MSTPCR3,  7, 0), /* SSI8 */
 	[MSTP114] = SH_CLK_MSTP32(&p_clk, MSTPCR1, 14, 0), /* Ether */
 	[MSTP110] = SH_CLK_MSTP32(&s_clk, MSTPCR1, 10, 0), /* VIN0 */
 	[MSTP109] = SH_CLK_MSTP32(&s_clk, MSTPCR1,  9, 0), /* VIN1 */
@@ -135,11 +154,20 @@ static struct clk mstp_clks[MSTP_NR] = {
 	[MSTP021] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 21, 0), /* SCIF5 */
 	[MSTP016] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 16, 0), /* TMU0 */
 	[MSTP015] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 15, 0), /* TMU1 */
+	[MSTP012] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 12, 0), /* SSI0 */
+	[MSTP011] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 11, 0), /* SSI1 */
+	[MSTP010] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 10, 0), /* SSI2 */
+	[MSTP009] = SH_CLK_MSTP32(&p_clk, MSTPCR0,  9, 0), /* SSI3 */
+	[MSTP008] = SH_CLK_MSTP32(&p_clk, MSTPCR0,  8, 0), /* SRU */
 	[MSTP007] = SH_CLK_MSTP32(&p_clk, MSTPCR0,  7, 0), /* HSPI */
 };
 
 static struct clk_lookup lookups[] = {
 	/* main */
+	CLKDEV_CON_ID("audio_clk_a",	&audio_clk_a),
+	CLKDEV_CON_ID("audio_clk_b",	&audio_clk_b),
+	CLKDEV_CON_ID("audio_clk_c",	&audio_clk_c),
+	CLKDEV_CON_ID("audio_clk_internal",	&s1_clk),
 	CLKDEV_CON_ID("shyway_clk",	&s_clk),
 	CLKDEV_CON_ID("peripheral_clk",	&p_clk),
 
@@ -168,6 +196,17 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_DEV_ID("sh-hspi.0", &mstp_clks[MSTP007]), /* HSPI0 */
 	CLKDEV_DEV_ID("sh-hspi.1", &mstp_clks[MSTP007]), /* HSPI1 */
 	CLKDEV_DEV_ID("sh-hspi.2", &mstp_clks[MSTP007]), /* HSPI2 */
+	CLKDEV_DEV_ID("rcar_sound", &mstp_clks[MSTP008]), /* SRU */
+
+	CLKDEV_ICK_ID("ssi.0", "rcar_sound", &mstp_clks[MSTP012]),
+	CLKDEV_ICK_ID("ssi.1", "rcar_sound", &mstp_clks[MSTP011]),
+	CLKDEV_ICK_ID("ssi.2", "rcar_sound", &mstp_clks[MSTP010]),
+	CLKDEV_ICK_ID("ssi.3", "rcar_sound", &mstp_clks[MSTP009]),
+	CLKDEV_ICK_ID("ssi.4", "rcar_sound", &mstp_clks[MSTP311]),
+	CLKDEV_ICK_ID("ssi.5", "rcar_sound", &mstp_clks[MSTP310]),
+	CLKDEV_ICK_ID("ssi.6", "rcar_sound", &mstp_clks[MSTP309]),
+	CLKDEV_ICK_ID("ssi.7", "rcar_sound", &mstp_clks[MSTP308]),
+	CLKDEV_ICK_ID("ssi.8", "rcar_sound", &mstp_clks[MSTP307]),
 };
 
 void __init r8a7778_clock_init(void)
-- 
1.8.4

[PATCH 4/8] ARM: shmobile: Initial r8a7791 SoC support

[Simon Horman]

From: Hisashi Nakamura <hisashi.nakamura.ak@renesas.com>

Add initial support for the r8a7791 SoC including:
 - Single Cortex-A15 CPU Core
 - GIC

No static virtual mappings are used, all the components
make use of ioremap(). DT_MACHINE_START is still wrapped
in CONFIG_USE_OF to match other mach-shmobile code.

Signed-off-by: Hisashi Nakamura <hisashi.nakamura.ak@renesas.com>
Signed-off-by: Ryo Kataoka <ryo.kataoka.wt@renesas.com>
[damm at opensource.se: Forward ported to upstream, dropped not-yet-ready code]
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7791.dtsi                |  41 ++++++
 arch/arm/mach-shmobile/Kconfig                |   6 +
 arch/arm/mach-shmobile/Makefile               |   2 +
 arch/arm/mach-shmobile/clock-r8a7791.c        | 198 ++++++++++++++++++++++++++
 arch/arm/mach-shmobile/include/mach/r8a7791.h |   6 +
 arch/arm/mach-shmobile/setup-r8a7791.c        |  38 +++++
 6 files changed, 291 insertions(+)
 create mode 100644 arch/arm/boot/dts/r8a7791.dtsi
 create mode 100644 arch/arm/mach-shmobile/clock-r8a7791.c
 create mode 100644 arch/arm/mach-shmobile/include/mach/r8a7791.h
 create mode 100644 arch/arm/mach-shmobile/setup-r8a7791.c

diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
new file mode 100644
index 0000000..bbed43b
--- /dev/null
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -0,0 +1,41 @@
+/*
+ * Device Tree Source for the r8a7791 SoC
+ *
+ * Copyright (C) 2013 Renesas Electronics Corporation
+ * Copyright (C) 2013 Renesas Solutions Corp.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/ {
+	compatible = "renesas,r8a7791";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu at 0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0>;
+			clock-frequency = <1300000000>;
+		};
+	};
+
+	gic: interrupt-controller at f1001000 {
+		compatible = "arm,cortex-a15-gic";
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+		interrupt-controller;
+		reg = <0 0xf1001000 0 0x1000>,
+			<0 0xf1002000 0 0x1000>,
+			<0 0xf1004000 0 0x2000>,
+			<0 0xf1006000 0 0x2000>;
+		interrupts = <1 9 0xf04>;
+	};
+};
diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index 1f94c31..b452405 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -101,6 +101,12 @@ config ARCH_R8A7790
 	select SH_CLK_CPG
 	select RENESAS_IRQC
 
+config ARCH_R8A7791
+	bool "R-Car M2 (R8A77910)"
+	select ARM_GIC
+	select CPU_V7
+	select SH_CLK_CPG
+
 config ARCH_EMEV2
 	bool "Emma Mobile EV2"
 	select ARCH_WANT_OPTIONAL_GPIOLIB
diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile
index 2705bfa..228193c 100644
--- a/arch/arm/mach-shmobile/Makefile
+++ b/arch/arm/mach-shmobile/Makefile
@@ -15,6 +15,7 @@ obj-$(CONFIG_ARCH_R8A7740)	+= setup-r8a7740.o
 obj-$(CONFIG_ARCH_R8A7778)	+= setup-r8a7778.o
 obj-$(CONFIG_ARCH_R8A7779)	+= setup-r8a7779.o
 obj-$(CONFIG_ARCH_R8A7790)	+= setup-r8a7790.o
+obj-$(CONFIG_ARCH_R8A7791)	+= setup-r8a7791.o
 obj-$(CONFIG_ARCH_EMEV2)	+= setup-emev2.o
 
 # Clock objects
@@ -27,6 +28,7 @@ obj-$(CONFIG_ARCH_R8A7740)	+= clock-r8a7740.o
 obj-$(CONFIG_ARCH_R8A7778)	+= clock-r8a7778.o
 obj-$(CONFIG_ARCH_R8A7779)	+= clock-r8a7779.o
 obj-$(CONFIG_ARCH_R8A7790)	+= clock-r8a7790.o
+obj-$(CONFIG_ARCH_R8A7791)	+= clock-r8a7791.o
 obj-$(CONFIG_ARCH_EMEV2)	+= clock-emev2.o
 endif
 
diff --git a/arch/arm/mach-shmobile/clock-r8a7791.c b/arch/arm/mach-shmobile/clock-r8a7791.c
new file mode 100644
index 0000000..9929feb
--- /dev/null
+++ b/arch/arm/mach-shmobile/clock-r8a7791.c
@@ -0,0 +1,198 @@
+/*
+ * r8a7791 clock framework support
+ *
+ * Copyright (C) 2013  Renesas Electronics Corporation
+ * Copyright (C) 2013  Renesas Solutions Corp.
+ * Copyright (C) 2013  Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/sh_clk.h>
+#include <linux/clkdev.h>
+#include <mach/clock.h>
+#include <mach/common.h>
+
+/*
+ *   MD		EXTAL		PLL0	PLL1	PLL3
+ * 14 13 19	(MHz)		*1	*1
+ *---------------------------------------------------
+ * 0  0  0	15 x 1		x172/2	x208/2	x106
+ * 0  0  1	15 x 1		x172/2	x208/2	x88
+ * 0  1  0	20 x 1		x130/2	x156/2	x80
+ * 0  1  1	20 x 1		x130/2	x156/2	x66
+ * 1  0  0	26 / 2		x200/2	x240/2	x122
+ * 1  0  1	26 / 2		x200/2	x240/2	x102
+ * 1  1  0	30 / 2		x172/2	x208/2	x106
+ * 1  1  1	30 / 2		x172/2	x208/2	x88
+ *
+ * *1 :	Table 7.6 indicates VCO ouput (PLLx = VCO/2)
+ *	see "p1 / 2" on R8A7791_CLOCK_ROOT() below
+ */
+
+#define MD(nr)	(1 << nr)
+
+#define CPG_BASE 0xe6150000
+#define CPG_LEN 0x1000
+
+#define SMSTPCR1	0xE6150134
+#define SMSTPCR2	0xe6150138
+#define SMSTPCR3	0xE615013C
+#define SMSTPCR5	0xE6150144
+#define SMSTPCR7	0xe615014c
+#define SMSTPCR8	0xE6150990
+#define SMSTPCR9	0xE6150994
+#define SMSTPCR10	0xE6150998
+
+#define MODEMR		0xE6160060
+#define SDCKCR		0xE6150074
+#define SD2CKCR		0xE6150078
+#define SD3CKCR		0xE615007C
+#define MMC0CKCR	0xE6150240
+#define MMC1CKCR	0xE6150244
+#define SSPCKCR		0xE6150248
+#define SSPRSCKCR	0xE615024C
+
+static struct clk_mapping cpg_mapping = {
+	.phys   = CPG_BASE,
+	.len    = CPG_LEN,
+};
+
+static struct clk extal_clk = {
+	/* .rate will be updated on r8a7791_clock_init() */
+	.mapping	= &cpg_mapping,
+};
+
+static struct sh_clk_ops followparent_clk_ops = {
+	.recalc	= followparent_recalc,
+};
+
+static struct clk main_clk = {
+	/* .parent will be set r8a73a4_clock_init */
+	.ops	= &followparent_clk_ops,
+};
+
+/*
+ * clock ratio of these clock will be updated
+ * on r8a7791_clock_init()
+ */
+SH_FIXED_RATIO_CLK_SET(pll1_clk,		main_clk,	1, 1);
+SH_FIXED_RATIO_CLK_SET(pll3_clk,		main_clk,	1, 1);
+
+/* fixed ratio clock */
+SH_FIXED_RATIO_CLK_SET(extal_div2_clk,		extal_clk,	1, 2);
+SH_FIXED_RATIO_CLK_SET(cp_clk,			extal_clk,	1, 2);
+
+SH_FIXED_RATIO_CLK_SET(pll1_div2_clk,		pll1_clk,	1, 2);
+SH_FIXED_RATIO_CLK_SET(hp_clk,			pll1_clk,	1, 12);
+SH_FIXED_RATIO_CLK_SET(p_clk,			pll1_clk,	1, 24);
+
+SH_FIXED_RATIO_CLK_SET(mp_clk,			pll1_div2_clk,	1, 15);
+
+static struct clk *main_clks[] = {
+	&extal_clk,
+	&extal_div2_clk,
+	&main_clk,
+	&pll1_clk,
+	&pll1_div2_clk,
+	&pll3_clk,
+	&hp_clk,
+	&p_clk,
+	&mp_clk,
+	&cp_clk,
+};
+
+/* MSTP */
+enum {
+	MSTP721, MSTP720,
+/*	MSTP216, MSTP207, MSTP206, MSTP204, MSTP203, MSTP202,*/
+	MSTP_NR
+};
+
+static struct clk mstp_clks[MSTP_NR] = {
+	[MSTP721] = SH_CLK_MSTP32(&p_clk, SMSTPCR7, 21, 0), /* SCIF0 */
+	[MSTP720] = SH_CLK_MSTP32(&p_clk, SMSTPCR7, 20, 0), /* SCIF1 */
+};
+
+static struct clk_lookup lookups[] = {
+
+	/* main clocks */
+	CLKDEV_CON_ID("extal",		&extal_clk),
+	CLKDEV_CON_ID("extal_div2",	&extal_div2_clk),
+	CLKDEV_CON_ID("main",		&main_clk),
+	CLKDEV_CON_ID("pll1",		&pll1_clk),
+	CLKDEV_CON_ID("pll1_div2",	&pll1_div2_clk),
+	CLKDEV_CON_ID("pll3",		&pll3_clk),
+	CLKDEV_CON_ID("hp",		&hp_clk),
+	CLKDEV_CON_ID("p",		&p_clk),
+	CLKDEV_CON_ID("mp",		&mp_clk),
+	CLKDEV_CON_ID("cp",		&cp_clk),
+	CLKDEV_CON_ID("peripheral_clk", &hp_clk),
+};
+
+#define R8A7791_CLOCK_ROOT(e, m, p0, p1, p30, p31)		\
+	extal_clk.rate	= e * 1000 * 1000;			\
+	main_clk.parent	= m;					\
+	SH_CLK_SET_RATIO(&pll1_clk_ratio, p1 / 2, 1);		\
+	if (mode & MD(19))					\
+		SH_CLK_SET_RATIO(&pll3_clk_ratio, p31, 1);	\
+	else							\
+		SH_CLK_SET_RATIO(&pll3_clk_ratio, p30, 1)
+
+
+void __init r8a7791_clock_init(void)
+{
+	void __iomem *modemr = ioremap_nocache(MODEMR, PAGE_SIZE);
+	u32 mode;
+	int k, ret = 0;
+
+	BUG_ON(!modemr);
+	mode = ioread32(modemr);
+	iounmap(modemr);
+
+	switch (mode & (MD(14) | MD(13))) {
+	case 0:
+		R8A7791_CLOCK_ROOT(15, &extal_clk, 172, 208, 106, 88);
+		break;
+	case MD(13):
+		R8A7791_CLOCK_ROOT(20, &extal_clk, 130, 156, 80, 66);
+		break;
+	case MD(14):
+		R8A7791_CLOCK_ROOT(26, &extal_div2_clk, 200, 240, 122, 102);
+		break;
+	case MD(13) | MD(14):
+		R8A7791_CLOCK_ROOT(30, &extal_div2_clk, 172, 208, 106, 88);
+		break;
+	}
+
+	for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++)
+		ret = clk_register(main_clks[k]);
+
+	if (!ret)
+		ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
+
+	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
+
+	if (!ret)
+		shmobile_clk_init();
+	else
+		goto epanic;
+
+	return;
+
+epanic:
+	panic("failed to setup r8a7791 clocks\n");
+}
diff --git a/arch/arm/mach-shmobile/include/mach/r8a7791.h b/arch/arm/mach-shmobile/include/mach/r8a7791.h
new file mode 100644
index 0000000..43b7206
--- /dev/null
+++ b/arch/arm/mach-shmobile/include/mach/r8a7791.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_R8A7791_H__
+#define __ASM_R8A7791_H__
+
+void r8a7791_clock_init(void);
+
+#endif /* __ASM_R8A7791_H__ */
diff --git a/arch/arm/mach-shmobile/setup-r8a7791.c b/arch/arm/mach-shmobile/setup-r8a7791.c
new file mode 100644
index 0000000..88dcce1
--- /dev/null
+++ b/arch/arm/mach-shmobile/setup-r8a7791.c
@@ -0,0 +1,38 @@
+/*
+ * r8a7791 processor support
+ *
+ * Copyright (C) 2013  Renesas Electronics Corporation
+ * Copyright (C) 2013  Renesas Solutions Corp.
+ * Copyright (C) 2013  Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/of_platform.h>
+#include <mach/common.h>
+#include <mach/r8a7791.h>
+#include <asm/mach/arch.h>
+
+#ifdef CONFIG_USE_OF
+static const char *r8a7791_boards_compat_dt[] __initdata = {
+	"renesas,r8a7791",
+	NULL,
+};
+
+DT_MACHINE_START(R8A7791_DT, "Generic R8A7791 (Flattened Device Tree)")
+	.dt_compat	= r8a7791_boards_compat_dt,
+MACHINE_END
+#endif /* CONFIG_USE_OF */
-- 
1.8.4

[PATCH 5/8] ARM: shmobile: r8a7791 SCIF support

[Simon Horman]

From: Yoshikazu Fujikawa <yoshikazu.fujikawa.ue@renesas.com>

Add SCIF serial port support to the r8a7791 SoC by
adding platform devices for SCIFA0 -> SCIFA5 as well
as SCIFB0 -> SCIFB2 and SCIF0 -> SCIF5 together with
clock bindings. DT device description is excluded at
this point since such bindings are still under
development.

Signed-off-by: Yoshikazu Fujikawa <yoshikazu.fujikawa.ue@renesas.com>
Signed-off-by: Ryo Kataoka <ryo.kataoka.wt@renesas.com>
[damm at opensource.se: Forward ported to upstream, dropped holes in enum]
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/clock-r8a7791.c        | 36 +++++++++++-
 arch/arm/mach-shmobile/include/mach/r8a7791.h |  1 +
 arch/arm/mach-shmobile/setup-r8a7791.c        | 82 +++++++++++++++++++++++++++
 3 files changed, 118 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mach-shmobile/clock-r8a7791.c b/arch/arm/mach-shmobile/clock-r8a7791.c
index 9929feb..df3122e 100644
--- a/arch/arm/mach-shmobile/clock-r8a7791.c
+++ b/arch/arm/mach-shmobile/clock-r8a7791.c
@@ -48,6 +48,7 @@
 #define CPG_BASE 0xe6150000
 #define CPG_LEN 0x1000
 
+#define SMSTPCR0	0xE6150130
 #define SMSTPCR1	0xE6150134
 #define SMSTPCR2	0xe6150138
 #define SMSTPCR3	0xE615013C
@@ -56,6 +57,7 @@
 #define SMSTPCR8	0xE6150990
 #define SMSTPCR9	0xE6150994
 #define SMSTPCR10	0xE6150998
+#define SMSTPCR11	0xE615099C
 
 #define MODEMR		0xE6160060
 #define SDCKCR		0xE6150074
@@ -118,13 +120,28 @@ static struct clk *main_clks[] = {
 /* MSTP */
 enum {
 	MSTP721, MSTP720,
-/*	MSTP216, MSTP207, MSTP206, MSTP204, MSTP203, MSTP202,*/
+	MSTP719, MSTP718, MSTP715, MSTP714,
+	MSTP216, MSTP207, MSTP206,
+	MSTP204, MSTP203, MSTP202, MSTP1105, MSTP1106, MSTP1107,
 	MSTP_NR
 };
 
 static struct clk mstp_clks[MSTP_NR] = {
 	[MSTP721] = SH_CLK_MSTP32(&p_clk, SMSTPCR7, 21, 0), /* SCIF0 */
 	[MSTP720] = SH_CLK_MSTP32(&p_clk, SMSTPCR7, 20, 0), /* SCIF1 */
+	[MSTP719] = SH_CLK_MSTP32(&p_clk, SMSTPCR7, 19, 0), /* SCIF2 */
+	[MSTP718] = SH_CLK_MSTP32(&p_clk, SMSTPCR7, 18, 0), /* SCIF3 */
+	[MSTP715] = SH_CLK_MSTP32(&p_clk, SMSTPCR7, 15, 0), /* SCIF4 */
+	[MSTP714] = SH_CLK_MSTP32(&p_clk, SMSTPCR7, 14, 0), /* SCIF5 */
+	[MSTP216] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 16, 0), /* SCIFB2 */
+	[MSTP207] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 7, 0), /* SCIFB1 */
+	[MSTP206] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 6, 0), /* SCIFB0 */
+	[MSTP204] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 4, 0), /* SCIFA0 */
+	[MSTP203] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 3, 0), /* SCIFA1 */
+	[MSTP202] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 2, 0), /* SCIFA2 */
+	[MSTP1105] = SH_CLK_MSTP32(&mp_clk, SMSTPCR11, 5, 0), /* SCIFA3 */
+	[MSTP1106] = SH_CLK_MSTP32(&mp_clk, SMSTPCR11, 6, 0), /* SCIFA4 */
+	[MSTP1107] = SH_CLK_MSTP32(&mp_clk, SMSTPCR11, 7, 0), /* SCIFA5 */
 };
 
 static struct clk_lookup lookups[] = {
@@ -141,6 +158,23 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_CON_ID("mp",		&mp_clk),
 	CLKDEV_CON_ID("cp",		&cp_clk),
 	CLKDEV_CON_ID("peripheral_clk", &hp_clk),
+
+	/* MSTP */
+	CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP204]), /* SCIFA0 */
+	CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP203]), /* SCIFA1 */
+	CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP206]), /* SCIFB0 */
+	CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP207]), /* SCIFB1 */
+	CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP216]), /* SCIFB2 */
+	CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP202]), /* SCIFA2 */
+	CLKDEV_DEV_ID("sh-sci.6", &mstp_clks[MSTP721]), /* SCIF0 */
+	CLKDEV_DEV_ID("sh-sci.7", &mstp_clks[MSTP720]), /* SCIF1 */
+	CLKDEV_DEV_ID("sh-sci.8", &mstp_clks[MSTP719]), /* SCIF2 */
+	CLKDEV_DEV_ID("sh-sci.9", &mstp_clks[MSTP718]), /* SCIF3 */
+	CLKDEV_DEV_ID("sh-sci.10", &mstp_clks[MSTP715]), /* SCIF4 */
+	CLKDEV_DEV_ID("sh-sci.11", &mstp_clks[MSTP714]), /* SCIF5 */
+	CLKDEV_DEV_ID("sh-sci.12", &mstp_clks[MSTP1105]), /* SCIFA3 */
+	CLKDEV_DEV_ID("sh-sci.13", &mstp_clks[MSTP1106]), /* SCIFA4 */
+	CLKDEV_DEV_ID("sh-sci.14", &mstp_clks[MSTP1107]), /* SCIFA5 */
 };
 
 #define R8A7791_CLOCK_ROOT(e, m, p0, p1, p30, p31)		\
diff --git a/arch/arm/mach-shmobile/include/mach/r8a7791.h b/arch/arm/mach-shmobile/include/mach/r8a7791.h
index 43b7206..d234b8c 100644
--- a/arch/arm/mach-shmobile/include/mach/r8a7791.h
+++ b/arch/arm/mach-shmobile/include/mach/r8a7791.h
@@ -1,6 +1,7 @@
 #ifndef __ASM_R8A7791_H__
 #define __ASM_R8A7791_H__
 
+void r8a7791_add_dt_devices(void);
 void r8a7791_clock_init(void);
 
 #endif /* __ASM_R8A7791_H__ */
diff --git a/arch/arm/mach-shmobile/setup-r8a7791.c b/arch/arm/mach-shmobile/setup-r8a7791.c
index 88dcce1..0de6aec 100644
--- a/arch/arm/mach-shmobile/setup-r8a7791.c
+++ b/arch/arm/mach-shmobile/setup-r8a7791.c
@@ -22,10 +22,92 @@
 #include <linux/irq.h>
 #include <linux/kernel.h>
 #include <linux/of_platform.h>
+#include <linux/serial_sci.h>
 #include <mach/common.h>
+#include <mach/irqs.h>
 #include <mach/r8a7791.h>
 #include <asm/mach/arch.h>
 
+#define SCIF_COMMON(scif_type, baseaddr, irq)			\
+	.type		= scif_type,				\
+	.mapbase	= baseaddr,				\
+	.flags		= UPF_BOOT_AUTOCONF | UPF_IOREMAP,	\
+	.irqs		= SCIx_IRQ_MUXED(irq)
+
+#define SCIFA_DATA(index, baseaddr, irq)		\
+[index] = {						\
+	SCIF_COMMON(PORT_SCIFA, baseaddr, irq),		\
+	.scbrr_algo_id	= SCBRR_ALGO_4,			\
+	.scscr = SCSCR_RE | SCSCR_TE,	\
+}
+
+#define SCIFB_DATA(index, baseaddr, irq)	\
+[index] = {					\
+	SCIF_COMMON(PORT_SCIFB, baseaddr, irq),	\
+	.scbrr_algo_id	= SCBRR_ALGO_4,		\
+	.scscr = SCSCR_RE | SCSCR_TE,		\
+}
+
+#define SCIF_DATA(index, baseaddr, irq)		\
+[index] = {						\
+	SCIF_COMMON(PORT_SCIF, baseaddr, irq),		\
+	.scbrr_algo_id	= SCBRR_ALGO_2,			\
+	.scscr = SCSCR_RE | SCSCR_TE,	\
+}
+
+#define HSCIF_DATA(index, baseaddr, irq)		\
+[index] = {						\
+	SCIF_COMMON(PORT_HSCIF, baseaddr, irq),		\
+	.scbrr_algo_id	= SCBRR_ALGO_6,			\
+	.scscr = SCSCR_RE | SCSCR_TE,	\
+}
+
+enum { SCIFA0, SCIFA1, SCIFB0, SCIFB1, SCIFB2, SCIFA2, SCIF0, SCIF1,
+	SCIF2, SCIF3, SCIF4, SCIF5, SCIFA3, SCIFA4, SCIFA5 };
+
+static const struct plat_sci_port scif[] __initconst = {
+	SCIFA_DATA(SCIFA0, 0xe6c40000, gic_spi(144)), /* SCIFA0 */
+	SCIFA_DATA(SCIFA1, 0xe6c50000, gic_spi(145)), /* SCIFA1 */
+	SCIFB_DATA(SCIFB0, 0xe6c20000, gic_spi(148)), /* SCIFB0 */
+	SCIFB_DATA(SCIFB1, 0xe6c30000, gic_spi(149)), /* SCIFB1 */
+	SCIFB_DATA(SCIFB2, 0xe6ce0000, gic_spi(150)), /* SCIFB2 */
+	SCIFA_DATA(SCIFA2, 0xe6c60000, gic_spi(151)), /* SCIFA2 */
+	SCIF_DATA(SCIF0, 0xe6e60000, gic_spi(152)), /* SCIF0 */
+	SCIF_DATA(SCIF1, 0xe6e68000, gic_spi(153)), /* SCIF1 */
+	SCIF_DATA(SCIF2, 0xe6e58000, gic_spi(22)), /* SCIF2 */
+	SCIF_DATA(SCIF3, 0xe6ea8000, gic_spi(23)), /* SCIF3 */
+	SCIF_DATA(SCIF4, 0xe6ee0000, gic_spi(24)), /* SCIF4 */
+	SCIF_DATA(SCIF5, 0xe6ee8000, gic_spi(25)), /* SCIF5 */
+	SCIFA_DATA(SCIFA3, 0xe6c70000, gic_spi(29)), /* SCIFA3 */
+	SCIFA_DATA(SCIFA4, 0xe6c78000, gic_spi(30)), /* SCIFA4 */
+	SCIFA_DATA(SCIFA5, 0xe6c80000, gic_spi(31)), /* SCIFA5 */
+};
+
+static inline void r8a7791_register_scif(int idx)
+{
+	platform_device_register_data(&platform_bus, "sh-sci", idx, &scif[idx],
+				      sizeof(struct plat_sci_port));
+}
+
+void __init r8a7791_add_dt_devices(void)
+{
+	r8a7791_register_scif(SCIFA0);
+	r8a7791_register_scif(SCIFA1);
+	r8a7791_register_scif(SCIFB0);
+	r8a7791_register_scif(SCIFB1);
+	r8a7791_register_scif(SCIFB2);
+	r8a7791_register_scif(SCIFA2);
+	r8a7791_register_scif(SCIF0);
+	r8a7791_register_scif(SCIF1);
+	r8a7791_register_scif(SCIF2);
+	r8a7791_register_scif(SCIF3);
+	r8a7791_register_scif(SCIF4);
+	r8a7791_register_scif(SCIF5);
+	r8a7791_register_scif(SCIFA3);
+	r8a7791_register_scif(SCIFA4);
+	r8a7791_register_scif(SCIFA5);
+}
+
 #ifdef CONFIG_USE_OF
 static const char *r8a7791_boards_compat_dt[] __initdata = {
 	"renesas,r8a7791",
-- 
1.8.4

[PATCH 6/8] ARM: shmobile: r8a7791 CMT support

[Simon Horman]

From: Magnus Damm <damm@opensource.se>

Add r8a7791 CMT support via channel 0 of CMT0. At this
point the CMT is used for clock event operation, but in
the future the arch timer will be the main timer and the
CMT will be used for deep sleep wake up only.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit a7663b88280d00359715817620798e99d54d401c)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/clock-r8a7791.c        |  7 ++++++-
 arch/arm/mach-shmobile/include/mach/r8a7791.h |  1 +
 arch/arm/mach-shmobile/setup-r8a7791.c        | 29 +++++++++++++++++++++++++++
 3 files changed, 36 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mach-shmobile/clock-r8a7791.c b/arch/arm/mach-shmobile/clock-r8a7791.c
index df3122e..c9a26f1 100644
--- a/arch/arm/mach-shmobile/clock-r8a7791.c
+++ b/arch/arm/mach-shmobile/clock-r8a7791.c
@@ -101,7 +101,7 @@ SH_FIXED_RATIO_CLK_SET(cp_clk,			extal_clk,	1, 2);
 SH_FIXED_RATIO_CLK_SET(pll1_div2_clk,		pll1_clk,	1, 2);
 SH_FIXED_RATIO_CLK_SET(hp_clk,			pll1_clk,	1, 12);
 SH_FIXED_RATIO_CLK_SET(p_clk,			pll1_clk,	1, 24);
-
+SH_FIXED_RATIO_CLK_SET(rclk_clk,		pll1_clk,	1, (48 * 1024));
 SH_FIXED_RATIO_CLK_SET(mp_clk,			pll1_div2_clk,	1, 15);
 
 static struct clk *main_clks[] = {
@@ -113,6 +113,7 @@ static struct clk *main_clks[] = {
 	&pll3_clk,
 	&hp_clk,
 	&p_clk,
+	&rclk_clk,
 	&mp_clk,
 	&cp_clk,
 };
@@ -123,6 +124,7 @@ enum {
 	MSTP719, MSTP718, MSTP715, MSTP714,
 	MSTP216, MSTP207, MSTP206,
 	MSTP204, MSTP203, MSTP202, MSTP1105, MSTP1106, MSTP1107,
+	MSTP124,
 	MSTP_NR
 };
 
@@ -142,6 +144,7 @@ static struct clk mstp_clks[MSTP_NR] = {
 	[MSTP1105] = SH_CLK_MSTP32(&mp_clk, SMSTPCR11, 5, 0), /* SCIFA3 */
 	[MSTP1106] = SH_CLK_MSTP32(&mp_clk, SMSTPCR11, 6, 0), /* SCIFA4 */
 	[MSTP1107] = SH_CLK_MSTP32(&mp_clk, SMSTPCR11, 7, 0), /* SCIFA5 */
+	[MSTP124] = SH_CLK_MSTP32(&rclk_clk, SMSTPCR1, 24, 0), /* CMT0 */
 };
 
 static struct clk_lookup lookups[] = {
@@ -155,6 +158,7 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_CON_ID("pll3",		&pll3_clk),
 	CLKDEV_CON_ID("hp",		&hp_clk),
 	CLKDEV_CON_ID("p",		&p_clk),
+	CLKDEV_CON_ID("rclk",		&rclk_clk),
 	CLKDEV_CON_ID("mp",		&mp_clk),
 	CLKDEV_CON_ID("cp",		&cp_clk),
 	CLKDEV_CON_ID("peripheral_clk", &hp_clk),
@@ -175,6 +179,7 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_DEV_ID("sh-sci.12", &mstp_clks[MSTP1105]), /* SCIFA3 */
 	CLKDEV_DEV_ID("sh-sci.13", &mstp_clks[MSTP1106]), /* SCIFA4 */
 	CLKDEV_DEV_ID("sh-sci.14", &mstp_clks[MSTP1107]), /* SCIFA5 */
+	CLKDEV_DEV_ID("sh_cmt.0", &mstp_clks[MSTP124]),
 };
 
 #define R8A7791_CLOCK_ROOT(e, m, p0, p1, p30, p31)		\
diff --git a/arch/arm/mach-shmobile/include/mach/r8a7791.h b/arch/arm/mach-shmobile/include/mach/r8a7791.h
index d234b8c..2e6d661 100644
--- a/arch/arm/mach-shmobile/include/mach/r8a7791.h
+++ b/arch/arm/mach-shmobile/include/mach/r8a7791.h
@@ -3,5 +3,6 @@
 
 void r8a7791_add_dt_devices(void);
 void r8a7791_clock_init(void);
+void r8a7791_init_early(void);
 
 #endif /* __ASM_R8A7791_H__ */
diff --git a/arch/arm/mach-shmobile/setup-r8a7791.c b/arch/arm/mach-shmobile/setup-r8a7791.c
index 0de6aec..b56399d 100644
--- a/arch/arm/mach-shmobile/setup-r8a7791.c
+++ b/arch/arm/mach-shmobile/setup-r8a7791.c
@@ -23,6 +23,7 @@
 #include <linux/kernel.h>
 #include <linux/of_platform.h>
 #include <linux/serial_sci.h>
+#include <linux/sh_timer.h>
 #include <mach/common.h>
 #include <mach/irqs.h>
 #include <mach/r8a7791.h>
@@ -89,6 +90,25 @@ static inline void r8a7791_register_scif(int idx)
 				      sizeof(struct plat_sci_port));
 }
 
+static const struct sh_timer_config cmt00_platform_data __initconst = {
+	.name = "CMT00",
+	.timer_bit = 0,
+	.clockevent_rating = 80,
+};
+
+static const struct resource cmt00_resources[] __initconst = {
+	DEFINE_RES_MEM(0xffca0510, 0x0c),
+	DEFINE_RES_MEM(0xffca0500, 0x04),
+	DEFINE_RES_IRQ(gic_spi(142)), /* CMT0_0 */
+};
+
+#define r8a7791_register_cmt(idx)					\
+	platform_device_register_resndata(&platform_bus, "sh_cmt",	\
+					  idx, cmt##idx##_resources,	\
+					  ARRAY_SIZE(cmt##idx##_resources), \
+					  &cmt##idx##_platform_data,	\
+					  sizeof(struct sh_timer_config))
+
 void __init r8a7791_add_dt_devices(void)
 {
 	r8a7791_register_scif(SCIFA0);
@@ -106,6 +126,14 @@ void __init r8a7791_add_dt_devices(void)
 	r8a7791_register_scif(SCIFA3);
 	r8a7791_register_scif(SCIFA4);
 	r8a7791_register_scif(SCIFA5);
+	r8a7791_register_cmt(00);
+}
+
+void __init r8a7791_init_early(void)
+{
+#ifndef CONFIG_ARM_ARCH_TIMER
+	shmobile_setup_delay(1300, 2, 4); /* Cortex-A15 @ 1300MHz */
+#endif
 }
 
 #ifdef CONFIG_USE_OF
@@ -115,6 +143,7 @@ static const char *r8a7791_boards_compat_dt[] __initdata = {
 };
 
 DT_MACHINE_START(R8A7791_DT, "Generic R8A7791 (Flattened Device Tree)")
+	.init_early	= r8a7791_init_early,
 	.dt_compat	= r8a7791_boards_compat_dt,
 MACHINE_END
 #endif /* CONFIG_USE_OF */
-- 
1.8.4

[PATCH 7/8] ARM: shmobile: r8a7778: add USBHS clock

[Simon Horman]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

This patch adds USBHS clock for renesas_usbhs driver

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/clock-r8a7778.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/mach-shmobile/clock-r8a7778.c b/arch/arm/mach-shmobile/clock-r8a7778.c
index 244a8de..fb6af83 100644
--- a/arch/arm/mach-shmobile/clock-r8a7778.c
+++ b/arch/arm/mach-shmobile/clock-r8a7778.c
@@ -181,6 +181,7 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_DEV_ID("r8a7778-vin.1", &mstp_clks[MSTP109]), /* VIN1 */
 	CLKDEV_DEV_ID("ehci-platform", &mstp_clks[MSTP100]), /* USB EHCI port0/1 */
 	CLKDEV_DEV_ID("ohci-platform", &mstp_clks[MSTP100]), /* USB OHCI port0/1 */
+	CLKDEV_DEV_ID("renesas_usbhs", &mstp_clks[MSTP100]), /* USB FUNC */
 	CLKDEV_DEV_ID("i2c-rcar.0", &mstp_clks[MSTP030]), /* I2C0 */
 	CLKDEV_DEV_ID("i2c-rcar.1", &mstp_clks[MSTP029]), /* I2C1 */
 	CLKDEV_DEV_ID("i2c-rcar.2", &mstp_clks[MSTP028]), /* I2C2 */
-- 
1.8.4

[PATCH 8/8] ARM: shmobile: r8a7778: add usb phy power control function

[Simon Horman]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

USB phy initialisation function is needed from not only
USB Host but also USB Function too.
This patch adds usb phy common control function.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/include/mach/r8a7778.h |  2 ++
 arch/arm/mach-shmobile/setup-r8a7778.c        | 37 +++++++++++++++++++--------
 2 files changed, 28 insertions(+), 11 deletions(-)

diff --git a/arch/arm/mach-shmobile/include/mach/r8a7778.h b/arch/arm/mach-shmobile/include/mach/r8a7778.h
index adfcf51..ea1dca6 100644
--- a/arch/arm/mach-shmobile/include/mach/r8a7778.h
+++ b/arch/arm/mach-shmobile/include/mach/r8a7778.h
@@ -35,4 +35,6 @@ extern void r8a7778_clock_init(void);
 extern void r8a7778_init_irq_extpin(int irlm);
 extern void r8a7778_pinmux_init(void);
 
+extern int r8a7778_usb_phy_power(bool enable);
+
 #endif /* __ASM_R8A7778_H__ */
diff --git a/arch/arm/mach-shmobile/setup-r8a7778.c b/arch/arm/mach-shmobile/setup-r8a7778.c
index 6a2657e..e484d14 100644
--- a/arch/arm/mach-shmobile/setup-r8a7778.c
+++ b/arch/arm/mach-shmobile/setup-r8a7778.c
@@ -95,29 +95,46 @@ static struct sh_timer_config sh_tmu1_platform_data __initdata = {
 		&sh_tmu##idx##_platform_data,		\
 		sizeof(sh_tmu##idx##_platform_data))
 
-/* USB */
-static struct usb_phy *phy;
+int r8a7778_usb_phy_power(bool enable)
+{
+	static struct usb_phy *phy = NULL;
+	int ret = 0;
+
+	if (!phy)
+		phy = usb_get_phy(USB_PHY_TYPE_USB2);
+
+	if (IS_ERR(phy)) {
+		pr_err("kernel doesn't have usb phy driver\n");
+		return PTR_ERR(phy);
+	}
+
+	if (enable)
+		ret = usb_phy_init(phy);
+	else
+		usb_phy_shutdown(phy);
 
+	return ret;
+}
+
+/* USB */
 static int usb_power_on(struct platform_device *pdev)
 {
-	if (IS_ERR(phy))
-		return PTR_ERR(phy);
+	int ret = r8a7778_usb_phy_power(true);
+
+	if (ret)
+		return ret;
 
 	pm_runtime_enable(&pdev->dev);
 	pm_runtime_get_sync(&pdev->dev);
 
-	usb_phy_init(phy);
-
 	return 0;
 }
 
 static void usb_power_off(struct platform_device *pdev)
 {
-	if (IS_ERR(phy))
+	if (r8a7778_usb_phy_power(false))
 		return;
 
-	usb_phy_shutdown(phy);
-
 	pm_runtime_put_sync(&pdev->dev);
 	pm_runtime_disable(&pdev->dev);
 }
@@ -353,8 +370,6 @@ void __init r8a7778_add_standard_devices(void)
 
 void __init r8a7778_init_late(void)
 {
-	phy = usb_get_phy(USB_PHY_TYPE_USB2);
-
 	platform_device_register_full(&ehci_info);
 	platform_device_register_full(&ohci_info);
 }
-- 
1.8.4

[GIT PULL 0/8] Renesas ARM based SoC updates for v3.13

[Olof Johansson]

On Tue, Oct 01, 2013 at 11:34:09AM +0900, Simon Horman wrote:
> Hi Kevin, Olof and Arnd,
> 
> please consider these Renesas ARM based SoC updates for v3.13.
> 
> This pull-request is based on v3.12-rc1.
> 
> 
> The following changes since commit 272b98c6455f00884f0350f775c5342358ebb73f:
> 
>   Linux 3.12-rc1 (2013-09-16 16:17:51 -0400)
> 
> are available in the git repository at:
> 
>   git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git soc

Pulled. As discussed earlier, the new platforms for 3.13 should be
the last ones of the legacy kind; from here on out we should see
multi-platform enabled new platforms from day one (i.e. once CCF and
other pieces land).


-Olof

[GIT PULL 0/8] Renesas ARM based SoC updates for v3.13

[Simon Horman]

On Mon, Oct 07, 2013 at 11:22:45AM -0700, Olof Johansson wrote:
> On Tue, Oct 01, 2013 at 11:34:09AM +0900, Simon Horman wrote:
> > Hi Kevin, Olof and Arnd,
> > 
> > please consider these Renesas ARM based SoC updates for v3.13.
> > 
> > This pull-request is based on v3.12-rc1.
> > 
> > 
> > The following changes since commit 272b98c6455f00884f0350f775c5342358ebb73f:
> > 
> >   Linux 3.12-rc1 (2013-09-16 16:17:51 -0400)
> > 
> > are available in the git repository at:
> > 
> >   git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git soc
> 
> Pulled. As discussed earlier, the new platforms for 3.13 should be
> the last ones of the legacy kind; from here on out we should see
> multi-platform enabled new platforms from day one (i.e. once CCF and
> other pieces land).

Thanks.

We have one more new platform queued up for v3.13,
the r7s72100 SoC / Genmai board. I plan to send a pull requests
which includes code for that platform in the next day or so.