[PATCH v7 0/2] Add PCIe support for i.MX6q

[marex@denx.de (Marek Vasut)]

Hi Yinghai,

> On Thu, Oct 10, 2013 at 7:18 PM, Marek Vasut <marex@denx.de> wrote:
> > And so does the probe log (but the pcieport failure still persists):
> > 
> > 
> > pci_bus 0000:04: bus scan returning with max=04
> > pci_bus 0000:04: busn_res: [bus 04-ff] end is updated to 04
> > pci_bus 0000:02: bus scan returning with max=04
> > pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 04
> > pci_bus 0000:01: bus scan returning with max=04
> > pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 04
> > pci_bus 0000:00: bus scan returning with max=04
> > pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 04
> > PCI: Device 0000:00:00.0 not available because of resource collisions
> > pcieport: probe of 0000:00:00.0 failed with error -22
> 
> load pcieport driver too early.

OK

[...]

> > pci_bus 0000:00: resource 4 [io  0x1000-0x10000]
> > pci_bus 0000:00: resource 5 [mem 0x01000000-0x01efffff]
> > pci_bus 0000:01: resource 0 [io  0x1000-0x1fff]
> > pci_bus 0000:01: resource 1 [mem 0x01000000-0x01bfffff]
> > pci_bus 0000:02: resource 0 [io  0x1000-0x1fff]
> > pci_bus 0000:02: resource 1 [mem 0x01000000-0x01bfffff]
> > pci_bus 0000:03: resource 0 [io  0x1000-0x1fff]
> > pci_bus 0000:03: resource 1 [mem 0x01000000-0x01bfffff]
> 
> Looks your arch call pci_assign_unassigned_resources() too late.
> 
> you should have call it with fs_initcall()...

You're right, the pci_assign_unassigned_resources() is called from probe() call 
of the MX6 PCIe driver, which is called from module_init().

imx6_pcie_init() -> imx6_pcie_probe() -> imx6_add_pcie_port() -> 
dw_pcie_host_init() -> pci_assign_unassigned_resources()

> please try to boot with "debug ignore_loglevel initcall_debug" to sort out
> the initcall sequence.

Yes, probing the MX6 PCIe driver in fs_initcall() actually fixed my issues:

diff --git a/drivers/pci/host/pci-imx6.c b/drivers/pci/host/pci-imx6.c
index 32b30ca..771892a 100644
--- a/drivers/pci/host/pci-imx6.c
+++ b/drivers/pci/host/pci-imx6.c

@@ -587,7 +590,7 @@ static int __init imx6_pcie_init(void)
 {
        return platform_driver_probe(&imx6_pcie_driver, imx6_pcie_probe);
 }                                                                                                                                                                          
-module_init(imx6_pcie_init);                                                                                                                                               
+fs_initcall(imx6_pcie_init);                                                                                                                                               
                                                                                                                                                                            
 MODULE_AUTHOR("Sean Cross <xobs@kosagi.com>");                                                                                                                             
 MODULE_DESCRIPTION("Freescale i.MX6 PCIe host controller driver");

Best regards,
Marek Vasut