From mboxrd@z Thu Jan 1 00:00:00 1970 From: s.hauer@pengutronix.de (Sascha Hauer) Date: Tue, 15 Oct 2013 12:09:32 +0200 Subject: [PATCH v2 2/3] ARM: dts: imx6qdl-wandboard: Add HDMI support In-Reply-To: <20131015100025.GX25034@n2100.arm.linux.org.uk> References: <1380826287-30253-1-git-send-email-fabio.estevam@freescale.com> <1380826287-30253-2-git-send-email-fabio.estevam@freescale.com> <20131014173824.GT25034@n2100.arm.linux.org.uk> <20131015100025.GX25034@n2100.arm.linux.org.uk> Message-ID: <20131015100931.GH30088@pengutronix.de> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Tue, Oct 15, 2013 at 11:00:26AM +0100, Russell King - ARM Linux wrote: > On Mon, Oct 14, 2013 at 11:47:17PM -0300, Fabio Estevam wrote: > > On Mon, Oct 14, 2013 at 2:38 PM, Russell King - ARM Linux > > wrote: > > > > > Shouldn't the above be in patch 1 (or 1.5) rather than patch 2? Patch 2 > > > advertises itself as adding support for the wandboard, but in actual > > > fact it's adding the generic bits too. > > > > Thanks for your review. Will address your comments in v3. > > > > Philipp Zabel mentioned that he will move imx-drm out of staging, so > > will send v3 after Philipp's patch gets into linux-next. > > That's unfortunate, especially given the bug with the clock polarity > (which, although I can tweak the register directly, it's not obvious > that changing the clk_pol initialisation is the correct solution.) > > There's also another issue here: the lack of DRM prime support. As > you have a separate GPU and separate VPU, you really need dmabuf > support implemented so that you can hand your scanout buffers/overlays > to other subsystems. See http://www.spinics.net/lists/linux-driver-devel/msg39324.html Besides other things this adds prime support. Sascha -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |