From: heiko@sntech.de (Heiko Stübner)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/5] ARM: rockchip: move shared dt properties to common source file
Date: Tue, 15 Oct 2013 12:59:34 +0200 [thread overview]
Message-ID: <201310151259.34314.heiko@sntech.de> (raw)
In-Reply-To: <201310151258.53435.heiko@sntech.de>
The rk3188 SoC shares a lot of peripherals with the rk3066 SoC,
but not all. Therefore move the common parts to a shared dtsi.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
arch/arm/boot/dts/rk3066a.dtsi | 98 +--------------------------------
arch/arm/boot/dts/rk3xxx.dtsi | 117 ++++++++++++++++++++++++++++++++++++++++
2 files changed, 118 insertions(+), 97 deletions(-)
create mode 100644 arch/arm/boot/dts/rk3xxx.dtsi
diff --git a/arch/arm/boot/dts/rk3066a.dtsi b/arch/arm/boot/dts/rk3066a.dtsi
index 56bfac9..2218c64 100644
--- a/arch/arm/boot/dts/rk3066a.dtsi
+++ b/arch/arm/boot/dts/rk3066a.dtsi
@@ -14,15 +14,12 @@
*/
#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/pinctrl/rockchip.h>
-#include "skeleton.dtsi"
+#include "rk3xxx.dtsi"
#include "rk3066a-clocks.dtsi"
/ {
compatible = "rockchip,rk3066a";
- interrupt-parent = <&gic>;
cpus {
#address-cells = <1>;
@@ -43,33 +40,6 @@
};
soc {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "simple-bus";
- ranges;
-
- gic: interrupt-controller at 1013d000 {
- compatible = "arm,cortex-a9-gic";
- interrupt-controller;
- #interrupt-cells = <3>;
- reg = <0x1013d000 0x1000>,
- <0x1013c100 0x0100>;
- };
-
- L2: l2-cache-controller at 10138000 {
- compatible = "arm,pl310-cache";
- reg = <0x10138000 0x1000>;
- cache-unified;
- cache-level = <2>;
- };
-
- local-timer at 1013c600 {
- compatible = "arm,cortex-a9-twd-timer";
- reg = <0x1013c600 0x20>;
- interrupts = <GIC_PPI 13 0x304>;
- clocks = <&dummy150m>;
- };
-
timer at 20038000 {
compatible = "snps,dw-apb-timer-osc";
reg = <0x20038000 0x100>;
@@ -320,71 +290,5 @@
};
};
};
-
- uart0: serial at 10124000 {
- compatible = "snps,dw-apb-uart";
- reg = <0x10124000 0x400>;
- interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
- reg-shift = <2>;
- reg-io-width = <1>;
- clocks = <&clk_gates1 8>;
- status = "disabled";
- };
-
- uart1: serial at 10126000 {
- compatible = "snps,dw-apb-uart";
- reg = <0x10126000 0x400>;
- interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
- reg-shift = <2>;
- reg-io-width = <1>;
- clocks = <&clk_gates1 10>;
- status = "disabled";
- };
-
- uart2: serial at 20064000 {
- compatible = "snps,dw-apb-uart";
- reg = <0x20064000 0x400>;
- interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
- reg-shift = <2>;
- reg-io-width = <1>;
- clocks = <&clk_gates1 12>;
- status = "disabled";
- };
-
- uart3: serial at 20068000 {
- compatible = "snps,dw-apb-uart";
- reg = <0x20068000 0x400>;
- interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
- reg-shift = <2>;
- reg-io-width = <1>;
- clocks = <&clk_gates1 14>;
- status = "disabled";
- };
-
- dwmmc at 10214000 {
- compatible = "rockchip,rk2928-dw-mshc";
- reg = <0x10214000 0x1000>;
- interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- clocks = <&clk_gates5 10>, <&clk_gates2 11>;
- clock-names = "biu", "ciu";
-
- status = "disabled";
- };
-
- dwmmc at 10218000 {
- compatible = "rockchip,rk2928-dw-mshc";
- reg = <0x10218000 0x1000>;
- interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- clocks = <&clk_gates5 11>, <&clk_gates2 13>;
- clock-names = "biu", "ciu";
-
- status = "disabled";
- };
};
};
diff --git a/arch/arm/boot/dts/rk3xxx.dtsi b/arch/arm/boot/dts/rk3xxx.dtsi
new file mode 100644
index 0000000..fd3e476
--- /dev/null
+++ b/arch/arm/boot/dts/rk3xxx.dtsi
@@ -0,0 +1,117 @@
+/*
+ * Copyright (c) 2013 MundoReader S.L.
+ * Author: Heiko Stuebner <heiko@sntech.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "skeleton.dtsi"
+
+/ {
+ interrupt-parent = <&gic>;
+
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ ranges;
+
+ gic: interrupt-controller at 1013d000 {
+ compatible = "arm,cortex-a9-gic";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ reg = <0x1013d000 0x1000>,
+ <0x1013c100 0x0100>;
+ };
+
+ L2: l2-cache-controller at 10138000 {
+ compatible = "arm,pl310-cache";
+ reg = <0x10138000 0x1000>;
+ cache-unified;
+ cache-level = <2>;
+ };
+
+ local-timer at 1013c600 {
+ compatible = "arm,cortex-a9-twd-timer";
+ reg = <0x1013c600 0x20>;
+ interrupts = <GIC_PPI 13 0x304>;
+ clocks = <&dummy150m>;
+ };
+
+ uart0: serial at 10124000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x10124000 0x400>;
+ interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <1>;
+ clocks = <&clk_gates1 8>;
+ status = "disabled";
+ };
+
+ uart1: serial at 10126000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x10126000 0x400>;
+ interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <1>;
+ clocks = <&clk_gates1 10>;
+ status = "disabled";
+ };
+
+ uart2: serial at 20064000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x20064000 0x400>;
+ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <1>;
+ clocks = <&clk_gates1 12>;
+ status = "disabled";
+ };
+
+ uart3: serial at 20068000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x20068000 0x400>;
+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <1>;
+ clocks = <&clk_gates1 14>;
+ status = "disabled";
+ };
+
+ dwmmc at 10214000 {
+ compatible = "rockchip,rk2928-dw-mshc";
+ reg = <0x10214000 0x1000>;
+ interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ clocks = <&clk_gates5 10>, <&clk_gates2 11>;
+ clock-names = "biu", "ciu";
+
+ status = "disabled";
+ };
+
+ dwmmc at 10218000 {
+ compatible = "rockchip,rk2928-dw-mshc";
+ reg = <0x10218000 0x1000>;
+ interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ clocks = <&clk_gates5 11>, <&clk_gates2 13>;
+ clock-names = "biu", "ciu";
+
+ status = "disabled";
+ };
+ };
+};
--
1.7.10.4
next prev parent reply other threads:[~2013-10-15 10:59 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-10-15 10:58 [PATCH 0/5] ARM: rockchip: Support for RK3188 and Radxa Rock board Heiko Stübner
2013-10-15 10:59 ` Heiko Stübner [this message]
2013-10-15 11:00 ` [PATCH 2/5] ARM: rockchip: enable arm-global-timer Heiko Stübner
2013-10-15 11:00 ` [PATCH 3/5] ARM: rockchip: add dts for bqcurie2 tablet Heiko Stübner
2013-10-15 11:01 ` [PATCH 4/5] ARM: rockchip: add support for rk3188 and Radxa Rock board Heiko Stübner
2013-10-15 11:08 ` Heiko Stübner
2013-10-15 11:01 ` [PATCH 5/5] MAINTAINERS: Add maintainers entry for Rockchip SoCs Heiko Stübner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201310151259.34314.heiko@sntech.de \
--to=heiko@sntech.de \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox