[PATCH 3/5] ARM: rockchip: add dts for bqcurie2 tablet

Heiko Stübner
2013-10-15T11:00:30Z

The BQ Curie2 is a tablet based on the rk3066a SoC.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
arch/arm/boot/dts/rk3066a-bqcurie2.dts | 109 ++++++++++++++++++++++++++++++++
1 file changed, 109 insertions(+)
create mode 100644 arch/arm/boot/dts/rk3066a-bqcurie2.dts

diff --git a/arch/arm/boot/dts/rk3066a-bqcurie2.dts b/arch/arm/boot/dts/rk3066a-bqcurie2.dts
new file mode 100644
index 0000000..035df40
--- /dev/null
+++ b/arch/arm/boot/dts/rk3066a-bqcurie2.dts
@@ -0,0 +1,109 @@
+/*
+ * Copyright (c) 2013 MundoReader S.L.
+ * Author: Heiko Stuebner <heiko@sntech.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+#include "rk3066a.dtsi"
+
+/ {
+ model = "bq Curie 2";
+
+ memory {
+ reg = <0x60000000 0x40000000>;
+ };
+
+ soc {
+ uart0: serial at 10124000 {
+ status = "okay";
+ };
+
+ uart1: serial at 10126000 {
+ status = "okay";
+ };
+
+ uart2: serial at 20064000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_xfer>;
+ status = "okay";
+ };
+
+ uart3: serial at 20068000 {
+ status = "okay";
+ };
+
+ vcc_sd0: fixed-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "sdmmc-supply";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ gpio = <&gpio3 7 GPIO_ACTIVE_LOW>;
+ startup-delay-us = <100000>;
+ };
+
+ dwmmc at 10214000 { /* sdmmc */
+ num-slots = <1>;
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4>;
+ vmmc-supply = <&vcc_sd0>;
+
+ slot at 0 {
+ reg = <0>;
+ bus-width = <4>;
+ disable-wp;
+ };
+ };
+
+ dwmmc at 10218000 { /* wifi */
+ num-slots = <1>;
+ status = "okay";
+ non-removable;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_bus4>;
+
+ slot at 0 {
+ reg = <0>;
+ bus-width = <4>;
+ disable-wp;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ autorepeat;
+
+ button at 0 {
+ gpios = <&gpio6 2 GPIO_ACTIVE_LOW>; /* GPIO6_A2 */
+ linux,code = <116>;
+ label = "GPIO Key Power";
+ linux,input-type = <1>;
+ gpio-key,wakeup = <1>;
+ debounce-interval = <100>;
+ };
+ button at 1 {
+ gpios = <&gpio4 21 GPIO_ACTIVE_LOW>; /* GPIO4_C5 */
+ linux,code = <104>;
+ label = "GPIO Key Vol-";
+ linux,input-type = <1>;
+ gpio-key,wakeup = <0>;
+ debounce-interval = <100>;
+ };
+ /* VOL+ comes somehow thru the ADC */
+ };
+ };
+};
--
1.7.10.4