* [PATCH] dma: atmel-dma: correct typo in the device tree bindings documentation
@ 2013-10-04 8:46 ludovic.desroches at atmel.com
2013-10-04 8:50 ` Nicolas Ferre
2013-10-20 13:18 ` Vinod Koul
0 siblings, 2 replies; 4+ messages in thread
From: ludovic.desroches at atmel.com @ 2013-10-04 8:46 UTC (permalink / raw)
To: linux-arm-kernel
From: Ludovic Desroches <ludovic.desroches@atmel.com>
The value to set ASAP mode for FIFO configuration is 2 instead of 1.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
---
Documentation/devicetree/bindings/dma/atmel-dma.txt | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/dma/atmel-dma.txt b/Documentation/devicetree/bindings/dma/atmel-dma.txt
index c280a0e..434f74e 100644
--- a/Documentation/devicetree/bindings/dma/atmel-dma.txt
+++ b/Documentation/devicetree/bindings/dma/atmel-dma.txt
@@ -28,7 +28,7 @@ The three cells in order are:
dependant:
- bit 7-0: peripheral identifier for the hardware handshaking interface. The
identifier can be different for tx and rx.
- - bit 11-8: FIFO configuration. 0 for half FIFO, 1 for ALAP, 1 for ASAP.
+ - bit 11-8: FIFO configuration. 0 for half FIFO, 1 for ALAP, 2 for ASAP.
Example:
--
1.7.11.3
^ permalink raw reply related [flat|nested] 4+ messages in thread
* [PATCH] dma: atmel-dma: correct typo in the device tree bindings documentation
2013-10-04 8:46 [PATCH] dma: atmel-dma: correct typo in the device tree bindings documentation ludovic.desroches at atmel.com
@ 2013-10-04 8:50 ` Nicolas Ferre
2013-10-18 14:42 ` Nicolas Ferre
2013-10-20 13:18 ` Vinod Koul
1 sibling, 1 reply; 4+ messages in thread
From: Nicolas Ferre @ 2013-10-04 8:50 UTC (permalink / raw)
To: linux-arm-kernel
On 04/10/2013 10:46, ludovic.desroches at atmel.com :
> From: Ludovic Desroches <ludovic.desroches@atmel.com>
>
> The value to set ASAP mode for FIFO configuration is 2 instead of 1.
>
> Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Yes, sure: thanks for having corrected it!
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
> ---
> Documentation/devicetree/bindings/dma/atmel-dma.txt | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/Documentation/devicetree/bindings/dma/atmel-dma.txt b/Documentation/devicetree/bindings/dma/atmel-dma.txt
> index c280a0e..434f74e 100644
> --- a/Documentation/devicetree/bindings/dma/atmel-dma.txt
> +++ b/Documentation/devicetree/bindings/dma/atmel-dma.txt
> @@ -28,7 +28,7 @@ The three cells in order are:
> dependant:
> - bit 7-0: peripheral identifier for the hardware handshaking interface. The
> identifier can be different for tx and rx.
> - - bit 11-8: FIFO configuration. 0 for half FIFO, 1 for ALAP, 1 for ASAP.
> + - bit 11-8: FIFO configuration. 0 for half FIFO, 1 for ALAP, 2 for ASAP.
>
> Example:
>
>
--
Nicolas Ferre
^ permalink raw reply [flat|nested] 4+ messages in thread
* [PATCH] dma: atmel-dma: correct typo in the device tree bindings documentation
2013-10-04 8:50 ` Nicolas Ferre
@ 2013-10-18 14:42 ` Nicolas Ferre
0 siblings, 0 replies; 4+ messages in thread
From: Nicolas Ferre @ 2013-10-18 14:42 UTC (permalink / raw)
To: linux-arm-kernel
On 04/10/2013 10:50, Nicolas Ferre :
> On 04/10/2013 10:46, ludovic.desroches at atmel.com :
>> From: Ludovic Desroches <ludovic.desroches@atmel.com>
>>
>> The value to set ASAP mode for FIFO configuration is 2 instead of 1.
>>
>> Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
>
> Yes, sure: thanks for having corrected it!
>
> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Vinod, ping?
>
>> ---
>> Documentation/devicetree/bindings/dma/atmel-dma.txt | 2 +-
>> 1 file changed, 1 insertion(+), 1 deletion(-)
>>
>> diff --git a/Documentation/devicetree/bindings/dma/atmel-dma.txt b/Documentation/devicetree/bindings/dma/atmel-dma.txt
>> index c280a0e..434f74e 100644
>> --- a/Documentation/devicetree/bindings/dma/atmel-dma.txt
>> +++ b/Documentation/devicetree/bindings/dma/atmel-dma.txt
>> @@ -28,7 +28,7 @@ The three cells in order are:
>> dependant:
>> - bit 7-0: peripheral identifier for the hardware handshaking interface. The
>> identifier can be different for tx and rx.
>> - - bit 11-8: FIFO configuration. 0 for half FIFO, 1 for ALAP, 1 for ASAP.
>> + - bit 11-8: FIFO configuration. 0 for half FIFO, 1 for ALAP, 2 for ASAP.
>>
>> Example:
>>
>>
>
>
--
Nicolas Ferre
^ permalink raw reply [flat|nested] 4+ messages in thread
* [PATCH] dma: atmel-dma: correct typo in the device tree bindings documentation
2013-10-04 8:46 [PATCH] dma: atmel-dma: correct typo in the device tree bindings documentation ludovic.desroches at atmel.com
2013-10-04 8:50 ` Nicolas Ferre
@ 2013-10-20 13:18 ` Vinod Koul
1 sibling, 0 replies; 4+ messages in thread
From: Vinod Koul @ 2013-10-20 13:18 UTC (permalink / raw)
To: linux-arm-kernel
On Fri, Oct 04, 2013 at 10:46:51AM +0200, ludovic.desroches at atmel.com wrote:
> From: Ludovic Desroches <ludovic.desroches@atmel.com>
>
> The value to set ASAP mode for FIFO configuration is 2 instead of 1.
Applied, thanks
--
~Vinod
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2013-10-20 13:18 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-10-04 8:46 [PATCH] dma: atmel-dma: correct typo in the device tree bindings documentation ludovic.desroches at atmel.com
2013-10-04 8:50 ` Nicolas Ferre
2013-10-18 14:42 ` Nicolas Ferre
2013-10-20 13:18 ` Vinod Koul
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).