From: s.hauer@pengutronix.de (Sascha Hauer)
To: linux-arm-kernel@lists.infradead.org
Subject: [Patch v2][ 08/37] video: mx3fb: Add device tree suport.
Date: Mon, 21 Oct 2013 10:03:27 +0200 [thread overview]
Message-ID: <20131021080327.GA30088@pengutronix.de> (raw)
In-Reply-To: <20131019110459.GM18477@ns203013.ovh.net>
On Sat, Oct 19, 2013 at 01:04:59PM +0200, Jean-Christophe PLAGNIOL-VILLARD wrote:
> On 17:02 Thu 17 Oct , Denis Carikli wrote:
> > diff --git a/Documentation/devicetree/bindings/video/fsl,mx3-fb.txt b/Documentation/devicetree/bindings/video/fsl,mx3-fb.txt
> > new file mode 100644
> > index 0000000..ae0b343
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/video/fsl,mx3-fb.txt
> > @@ -0,0 +1,52 @@
> > +Freescale mx3 Framebuffer
> > +
> > +This framebuffer driver supports the imx31 and imx35 devices.
> > +
> > +Required properties:
> > +- compatible : Must be "fsl,mx3-fb".
> > +- reg : Should contain 1 register ranges(address and length).
> > +- dmas : Phandle to the ipu dma node as described in
> > + Documentation/devicetree/bindings/dma/dma.txt
> > +- dma-names : Must be "tx".
> > +- clocks : Phandle to the ipu source clock.
> > +- display: Phandle to a display node as described in
> > + Documentation/devicetree/bindings/video/display-timing.txt
> > + Additional, the display node has to define properties:
> > + - bits-per-pixel: lcd panel bit-depth.
> > +
> > +Optional properties:
> > +- ipu-disp-format: could be "rgb666", "rgb565", or "rgb888".
> > + If not specified defaults to "rgb666".
> > +
> > +Example:
> > +
> > + lcdc: mx3fb at 53fc00b4 {
> > + compatible = "fsl,mx3-fb";
> > + reg = <0x53fc00b4 0x0b>;
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_lcdc_1>;
> > + clocks = <&clks 55>;
> > + dmas = <&ipu 14>;
> > + dma-names = "tx";
> > + };
As mentioned to the v1 patch: This should really be closer to the IPUv3
binding. IPUv1 and IPUv3 are very similar hardwares. Having two
different bindings for it is painful.
Implementing IPUv1 as a DMA driver was the wrong decision back then, now
exposing the IPU to dt using the DMA binding makes it worse.
Sascha
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
next prev parent reply other threads:[~2013-10-21 8:03 UTC|newest]
Thread overview: 59+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-10-17 15:01 Devicetree support for Eukrea cpuimx{25,35,51} (v2) Denis Carikli
2013-10-17 15:01 ` [Patch v2][ 01/37] of: add vendor prefix for Eukréa Electromatique Denis Carikli
2013-10-17 15:02 ` [Patch v2][ 02/37] dma: ipu: Add devicetree support Denis Carikli
2013-10-18 6:42 ` Sascha Hauer
2013-10-17 15:02 ` [Patch v2][ 03/37] drm: Add the lacking DRM_MODE_FLAG_* for matching the DISPLAY_FLAGS_* Denis Carikli
2013-10-18 7:46 ` Ville Syrjälä
2013-10-23 14:48 ` Denis Carikli
2013-10-23 15:38 ` Ville Syrjälä
2013-10-23 15:47 ` Matt Sealey
2013-10-17 15:02 ` [Patch v2][ 04/37] [media] v4l2: add new V4L2_PIX_FMT_RGB666 pixel format Denis Carikli
2013-10-31 13:18 ` Mauro Carvalho Chehab
2013-10-31 14:06 ` Laurent Pinchart
2013-10-17 15:02 ` [Patch v2][ 05/37] fbdev: Add the lacking FB_SYNC_* for matching the DISPLAY_FLAGS_* Denis Carikli
2013-10-19 11:08 ` Jean-Christophe PLAGNIOL-VILLARD
2013-10-17 15:02 ` [Patch v2][ 06/37] video: backlight: gpio-backlight: Add DT support Denis Carikli
2013-10-17 15:02 ` [Patch v2][ 07/37] video: mx3fb: Introduce regulator support Denis Carikli
2013-10-19 11:08 ` Jean-Christophe PLAGNIOL-VILLARD
2013-10-17 15:02 ` [Patch v2][ 08/37] video: mx3fb: Add device tree suport Denis Carikli
2013-10-19 11:04 ` Jean-Christophe PLAGNIOL-VILLARD
2013-10-21 8:03 ` Sascha Hauer [this message]
2013-10-17 15:02 ` [Patch v2][ 09/37] video: imxfb: Introduce regulator support Denis Carikli
2013-10-17 15:02 ` [Patch v2][ 10/37] video: imxfb: Also add pwmr for the device tree Denis Carikli
2013-10-19 10:57 ` Jean-Christophe PLAGNIOL-VILLARD
2013-10-17 15:02 ` [Patch v2][ 11/37] staging: imx-drm: use of_get_display_timings Denis Carikli
2013-10-18 6:46 ` Sascha Hauer
2013-10-17 15:02 ` [Patch v2][ 12/37] staging: imx-drm: ipuv3-crtc: don't harcode some mode flags Denis Carikli
2013-10-17 15:02 ` [Patch v2][ 13/37] staging: imx-drm: Add RGB666 support for parallel display Denis Carikli
2013-10-31 13:18 ` Mauro Carvalho Chehab
2013-10-17 15:02 ` [Patch v2][ 14/37] staging: imx-drm: parallel display: add regulator support Denis Carikli
2013-10-17 16:47 ` Dan Carpenter
2013-10-17 15:02 ` [Patch v2][ 15/37] Input: tsc2007: Add device tree support Denis Carikli
2013-10-18 8:36 ` Lothar Waßmann
2013-10-17 15:02 ` [Patch v2][ 16/37] ASoC: eukrea-tlv320: Add DT support Denis Carikli
2013-10-18 9:19 ` Lothar Waßmann
2013-10-17 15:02 ` [Patch v2][ 17/37] DT: Add basic support for imx35-based devices Denis Carikli
2013-10-18 6:58 ` Sascha Hauer
2013-10-17 15:02 ` [Patch v2][ 18/37] ARM: imx{25, 27} DT: Permit the selection of the imxfb framebuffer driver Denis Carikli
2013-10-17 15:02 ` [Patch v2][ 19/37] pinctrl: pinctrl-imx: add imx25 pinctrl driver Denis Carikli
2013-10-17 15:02 ` [Patch v2][ 20/37] arm/dts: imx25.dtsi: Add some pinmux pins Denis Carikli
2013-10-18 7:02 ` Sascha Hauer
2013-10-17 15:02 ` [Patch v2][ 21/37] arm/dts: i.MX25: Add ssi clocks and DMA events Denis Carikli
2013-10-17 15:02 ` [Patch v2][ 22/37] arm/dts: i.MX25: Add sdma script path Denis Carikli
2013-10-17 15:02 ` [Patch v2][ 23/37] arm/dts: imx25.dtsi: Add an alias for the Audio Multiplexer Denis Carikli
2013-10-17 15:02 ` [Patch v2][ 24/37] arm/dts: Add support for the cpuimx25 board from Eukrea and its baseboard Denis Carikli
2013-10-17 15:02 ` [Patch v2][ 25/37] arm/dts: imx51.dtsi: Add some pinmux pins Denis Carikli
2013-10-17 15:02 ` [Patch v2][ 26/37] arm/dts: Add support for the cpuimx51 board from Eukrea and its baseboard Denis Carikli
2013-10-17 15:02 ` [Patch v2][ 27/37] arm/dts: Add support for the cpuimx35 " Denis Carikli
2013-10-17 15:02 ` [Patch v2][ 28/37] ARM: imx_v6_v7_defconfig: Enable i.MX35 DT support Denis Carikli
2013-10-18 8:23 ` Shawn Guo
2013-10-17 15:02 ` [Patch v2][ 29/37] ARM: imx_v6_v7_defconfig: Enable tsc2007 support Denis Carikli
2013-10-17 15:02 ` [Patch v2][ 30/37] ARM: imx_v6_v7_defconfig: Enable pcf8563 support Denis Carikli
2013-10-17 15:02 ` [Patch v2][ 31/37] ARM: imx_v6_v7_defconfig: Enable gpio regulator support Denis Carikli
2013-10-17 15:02 ` [Patch v2][ 32/37] ARM: imx_v4_v5_defconfig: " Denis Carikli
2013-10-17 15:02 ` [Patch v2][ 33/37] ARM: imx_v4_v5_defconfig: Enable backlight gpio support Denis Carikli
2013-10-17 15:02 ` [Patch v2][ 34/37] ARM: imx_v6_v7_defconfig: " Denis Carikli
2013-10-17 15:02 ` [Patch v2][ 35/37] ARM: imx_v4_v5_defconfig: Enable gpio button/keyboard support Denis Carikli
2013-10-17 15:02 ` [Patch v2][ 36/37] ARM: imx_v6_v7_defconfig: Enable led gpio support Denis Carikli
2013-10-17 15:02 ` [Patch v2][ 37/37] ARM: imx_v6_v7_defconfig: Enable heartbeat led trigger Denis Carikli
2013-10-18 7:59 ` Devicetree support for Eukrea cpuimx{25,35,51} (v2) Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20131021080327.GA30088@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).