linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: mturquette@linaro.org (Mike Turquette)
To: linux-arm-kernel@lists.infradead.org
Subject: [GIT PULL] ux500 devicetree patches, take 3
Date: Mon, 21 Oct 2013 05:41:00 -0700	[thread overview]
Message-ID: <20131021124100.11944.72532@quantum> (raw)
In-Reply-To: <CACRpkdYyazH9KevkA=qTho3okdKnKWcq_uMwRroa6=svacfJAQ@mail.gmail.com>

Quoting Linus Walleij (2013-10-18 12:23:45)
> Hi ARM SoC folks,
> 
> this is yet another pull request for ux500 device tree stuff. It should
> go on top of the second pull request, I tested to pull it on top of
> ux500/dt2 in the ARM SoC tree and it worked just fine.
> 
> These are fixes and additions found during testing of the switch to
> full device tree on ux500. The clock fixes will go into the -rc:s if
> you don't take this in as a whole.
> 
> There is one oneline patch to the clock driver that I have not had
> an ACK from Mike on, but Lee checked it and I certainly don't
> think Mike has anything against it. The last patch adds the SSP
> and SPI devices that were strangely absent from the platform
> after the conversion.

If it is not too late:

Acked-by: Mike Turquette <mturquette@linaro.org>

> 
> So: please pull this into ARM SoC as ux500/dt3 or something.
> 
> Yours,
> Linus Walleij
> 
> 
> The following changes since commit 741a6c4c59cfa1266bc75aca9f66bdc6e421b0d5:
> 
>   ARM: ux500: move BU21013 touchpad GPIOs into top-level DTS
> (2013-10-03 10:29:24 +0200)
> 
> are available in the git repository at:
> 
>   git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson.git
> tags/ux500-dt-for-v3.13-3
> 
> for you to fetch changes up to 6e1484c2761e56bb98ec95ccdd1d98d2f67852ae:
> 
>   ARM: ux500: register all SSP and SPI blocks (2013-10-18 14:55:44 +0200)
> 
> ----------------------------------------------------------------
> Five incremental device tree patches around the clock handling,
> and adding SSP/SPI devices to the device tree.
> 
> ----------------------------------------------------------------
> Linus Walleij (5):
>       ARM: ux500: fix clock for GPIO block 8
>       clk: ux500: fix erroneous bit assignment
>       ARM: ux500: fix clock for GPIO blocks 6 and 7
>       ARM: ux500: fix I2C4 clock bit
>       ARM: ux500: register all SSP and SPI blocks
> 
>  arch/arm/boot/dts/ste-dbx5x0.dtsi | 83 ++++++++++++++++++++++++++++++++++++---
>  drivers/clk/ux500/u8500_of_clk.c  |  2 +-
>  2 files changed, 79 insertions(+), 6 deletions(-)

  reply	other threads:[~2013-10-21 12:41 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-10-18 19:23 [GIT PULL] ux500 devicetree patches, take 3 Linus Walleij
2013-10-21 12:41 ` Mike Turquette [this message]
2013-10-28  4:21 ` Olof Johansson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20131021124100.11944.72532@quantum \
    --to=mturquette@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).