[PATCH v5 12/14] mtd: nand: pxa3xx: Introduce multiple page I/O support

[ezequiel.garcia@free-electrons.com (Ezequiel Garcia)]

On Thu, Nov 14, 2013 at 02:40:56PM -0800, Brian Norris wrote:
> On Thu, Nov 14, 2013 at 06:25:37PM -0300, Ezequiel Garcia wrote:
> > --- a/drivers/mtd/nand/pxa3xx_nand.c
> > +++ b/drivers/mtd/nand/pxa3xx_nand.c
> > @@ -1151,7 +1288,28 @@ static int armada370_ecc_init(struct pxa3xx_nand_info *info,
> >  			      struct nand_ecc_ctrl *ecc,
> >  			      int strength, int page_size)
> >  {
> > -	/* Unimplemented yet */
> > +	if (strength == 4 && page_size == 4096) {
> 
> I still think this sort of check can be improved just a bit. Can you
> comment on my additional diff, pasted below? (Not even compile-tested)
> 
> > +		info->ecc_bch = 1;
> > +		info->chunk_size = 2048;
> > +		info->spare_size = 32;
> > +		info->ecc_size = 32;
> > +		ecc->mode = NAND_ECC_HW;
> > +		ecc->size = info->chunk_size;
> > +		ecc->layout = &ecc_layout_4KB_bch4bit;
> > +		ecc->strength = 16;
> > +		return 1;
> > +
> > +	} else if (strength == 8 && page_size == 4096) {
> > +		info->ecc_bch = 1;
> > +		info->chunk_size = 1024;
> > +		info->spare_size = 0;
> > +		info->ecc_size = 32;
> > +		ecc->mode = NAND_ECC_HW;
> > +		ecc->size = info->chunk_size;
> > +		ecc->layout = &ecc_layout_4KB_bch8bit;
> > +		ecc->strength = 16;
> > +		return 1;
> > +	}
> >  	return 0;
> >  }
> >  
> 
> Brian
> 
> diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c
> index 8cb6640..e219d75 100644
> --- a/drivers/mtd/nand/pxa3xx_nand.c
> +++ b/drivers/mtd/nand/pxa3xx_nand.c
> @@ -1363,9 +1363,13 @@ static int pxa_ecc_init(struct pxa3xx_nand_info *info,
>  
>  static int armada370_ecc_init(struct pxa3xx_nand_info *info,
>  			      struct nand_ecc_ctrl *ecc,
> -			      int strength, int page_size)
> +			      int strength, int ecc_stepsize, int page_size)
>  {
> -	if (strength == 4 && page_size == 4096) {
> +	/*
> +	 * Required ECC: 4-bit correction per 512 bytes
> +	 * Select: 16-bit correction per 2048 bytes
> +	 */
> +	if (strength == 4 && ecc_stepsize == 512 && page_size == 4096) {
>  		info->ecc_bch = 1;
>  		info->chunk_size = 2048;
>  		info->spare_size = 32;
> @@ -1376,7 +1380,11 @@ static int armada370_ecc_init(struct pxa3xx_nand_info *info,
>  		ecc->strength = 16;
>  		return 1;
>  
> -	} else if (strength == 8 && page_size == 4096) {
> +	/*
> +	 * Required ECC: 8-bit correction per 512 bytes
> +	 * Select: 16-bit correction per 1024 bytes
> +	 */
> +	} else if (strength == 8 && ecc_stepsize == 512 && page_size == 4096) {
>  		info->ecc_bch = 1;
>  		info->chunk_size = 1024;
>  		info->spare_size = 0;
> @@ -1484,6 +1492,7 @@ KEEP_CONFIG:
>  	if (info->variant == PXA3XX_NAND_VARIANT_ARMADA370)
>  		ret = armada370_ecc_init(info, &chip->ecc,
>  				   chip->ecc_strength_ds,
> +				   chip->ecc_step_ds,
>  				   mtd->writesize);
>  	else
>  		ret = pxa_ecc_init(info, &chip->ecc,

Looks good, but let me see if I'm getting this straight.

Your point is that an ECC "strength" is meaningless without
the _step_ definition.

So, I was assuming the step to be 512, and your diff is making such
assumption an explicit check.

Correct me if I didn't understand.
-- 
Ezequiel Garc?a, Free Electrons
Embedded Linux, Kernel and Android Engineering
http://free-electrons.com