linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: tony@atomide.com (Tony Lindgren)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH V3] ARM: OMAP2+: omap_device: maintain sane runtime pm status around suspend/resume
Date: Fri, 15 Nov 2013 06:37:37 -0800	[thread overview]
Message-ID: <20131115143736.GW10317@atomide.com> (raw)
In-Reply-To: <528621E5.4030201@ti.com>

* Nishanth Menon <nm@ti.com> [131115 05:30]:
> On 11/15/2013 02:07 AM, Paul Walmsley wrote:
> > On Thu, 14 Nov 2013, Nishanth Menon wrote:
> > 
> >> OMAP device hooks around suspend|resume_noirq ensures that hwmod
> >> devices are forced to idle using omap_device_idle/enable as part of
> >> the last stage of suspend activity.
> >>
> >> For a device such as i2c who uses autosuspend, it is possible to enter
> >> the suspend path with dev->power.runtime_status = RPM_ACTIVE.
> >>
> >> As part of the suspend flow, the generic runtime logic would increment
> >> it's dev->power.disable_depth to 1. This should prevent further
> >> pm_runtime_get_sync from succeeding once the runtime_status has been
> >> set to RPM_SUSPENDED.
> >>
> >> Now, as part of the suspend_noirq handler in omap_device, we force the
> >> following: if the device status is !suspended, we force the device
> >> to idle using omap_device_idle (clocks are cut etc..). This ensures
> >> that from a hardware perspective, the device is "suspended". However,
> >> runtime_status is left to be active.
> >>
> >> *if* an operation is attempted after this point to
> >> pm_runtime_get_sync, runtime framework depends on runtime_status to
> >> indicate accurately the device status, and since it sees it to be
> >> ACTIVE, it assumes the module is functional and returns a non-error
> >> value. As a result the user will see pm_runtime_get succeed, however a
> >> register access will crash due to the lack of clocks.
> >>
> >> To prevent this from happening, we should ensure that runtime_status
> >> exactly indicates the device status. As a result of this change
> >> any further calls to pm_runtime_get* would return -EACCES (since
> >> disable_depth is 1). On resume, we restore the clocks and runtime
> >> status exactly as we suspended with. These operations are not expected
> >> to fail as we update the states after the core runtime framework has
> >> suspended itself and restore before the core runtime framework has
> >> resumed.
> >>
> >> Reported-by: J Keerthy <j-keerthy@ti.com>
> >> Signed-off-by: Nishanth Menon <nm@ti.com>
> >> Acked-by: Rajendra Nayak <rnayak@ti.com>
> >> Acked-by: Kevin Hilman <khilman@linaro.org>
> > 
> > Looks reasonable to me.  Looks like this should be considered for -stable 
> > - Nishanth, what do you think?
> 
> Every product kernel since 3.4 needed to be hacked (we have hacked in
> different ways so far) to work around this (since we never spend time
> digging deeper :( ), So, I do agree with your view that a -stable tag
> will be most beneficial.
> 
> > 
> > Tony or Kevin, do you want to take this one, or want me to?

I can take it unless you have other fixes pending right now.

Tony

  reply	other threads:[~2013-11-15 14:37 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-11-12 23:08 [PATCH V2] ARM: OMAP2+: omap_device: maintain sane runtime pm status around suspend/resume Nishanth Menon
2013-11-13 12:51 ` Felipe Balbi
2013-11-13 14:56   ` Nishanth Menon
2013-11-13 15:20     ` Felipe Balbi
2013-11-13 15:28       ` Nishanth Menon
2013-11-13 15:45     ` Kevin Hilman
2013-11-13 16:19       ` Nishanth Menon
2013-11-14 17:05 ` [PATCH V3] " Nishanth Menon
2013-11-14 18:55   ` Felipe Balbi
2013-11-14 19:30     ` Nishanth Menon
2013-11-15  8:07   ` Paul Walmsley
2013-11-15 13:30     ` Nishanth Menon
2013-11-15 14:37       ` Tony Lindgren [this message]
2013-11-15 20:04         ` Paul Walmsley
2013-11-15 22:03         ` Kevin Hilman
2013-11-19 11:34           ` Ulf Hansson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20131115143736.GW10317@atomide.com \
    --to=tony@atomide.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).