[PATCH v2 00/11]: add remaining support for IGEP boards

[tony@atomide.com (Tony Lindgren)]

* Tomi Valkeinen <tomi.valkeinen@ti.com> [131126 03:19]:
> On 2013-11-25 17:30, Javier Martinez Canillas wrote:
> > On Wed, Nov 20, 2013 at 2:06 AM, Javier Martinez Canillas
> > <javier.martinez@collabora.co.uk> wrote:
> >> In order to make mach-omap2 Device Tree only, the board file for
> >> IGEP boards was removed even when support for wifi and display
> >> was still not supported by its DTS.
> >>
> >> This is a second version of a patch-set that adds support for
> >> these remaining peripherals and also adds support for USB,
> >> HDMI and user LED for the am33xx SoC based IGEP Aquila board.
> >>
> >> The patch-set is composed of the following patches:
> >>
> >> Enric Balletbo i Serra (7):
> >>       ARM: dts: omap3-igep: Fix bus-width for mmc1.
> >>       ARM: dts: omap3-igep: Add support for LBEE1USJYC WiFi connected to SDIO.
> >>       ARM: dts: omap3-igep: Update to use the TI AM/DM37x processor.
> >>       ARM: dts: AM33XX BASE0033: add pinmux and hdmi node to enable display
> >>       ARM: dts: AM33XX BASE0033: add pinmux and user led support.
> >>       ARM: dts: AM33XX BASE0033: add 32KBit EEPROM support.
> >>       ARM: dts: AM33XX IGEP0033: add USB support.
> >>
> >> Javier Martinez Canillas (4):
> >>       ARM: dts: omap3-igep0020: Add pinmux setup for i2c devices
> >>       ARM: dts: omap3-igep0020: Add pinmuxing for DVI output
> >>       ARM: OMAP: dss-common: change IGEP's DVI DDC i2c bus
> >>       ARM: dts: omap3-igep0020: name twl4030 VPLL2 regulator as vdds_dsi
> >>
> >> Changes since v1:
> >>
> >>  Don't add a workaround in drivers/video/omap2/dss/dpi.c to use the
> >>  VPLL2 regulator from twl4030 if VDDS_DSI regulator is not linked to
> >>  the DPI device since the used regulator is a per board configuration.
> >>
> >>  Instead add a regulator-name = "vdds_dsi" property to the regulator
> >>  in the IGEPv2 DTS file as suggested by Tony Lindgren.
> >>
> >> Tony,
> >>
> >> Most of these patches are just DTS changes so they have to be picked
> >> by Benoit besides the following patch that has to go through your tree
> >>
> >> [PATCH 10/11] ARM: OMAP: dss-common: change IGEP's DVI DDC i2c bus
> >>
> >> Since we have removed the board file for IGEP boards I think these
> >> can be considered as regression fixes for 3.13 although I don't mind
> >> if you prefer to wait for 3.14.
> >>
> >> Thanks a lot and best regards,
> >> Javier
> >> --
> > 
> > Hi Benoit and Tony,
> > 
> > Now that 3.13-rc1 is out, do you think that it would be possible to
> > include this series as a fix for the -rc cycle?
> > 
> > Otherwise we will have missing functionality for IGEP boards on 3.13
> > due the board file removal. The changes are mostly DT and won't affect
> > other boards.
> 
> The DSS related parts look fine to me.

Thanks, applying the whole series into omap-for-v3.13/fixes-take4.

Regards,

Tony