[PATCH RFC v2 05/17] ARM: shmobile: r8a7779: Reference clocks

[horms@verge.net.au (Simon Horman)]

On Tue, Nov 26, 2013 at 03:50:16PM +0100, Laurent Pinchart wrote:
> Hi Simon,
> 
> Thank you for the patch.
> 
> On Tuesday 26 November 2013 16:32:07 Simon Horman wrote:
> > Reference clocks using a "clocks" property in all nodes corresponding to
> > devices that require a clock.
> 
> There's a sata node in your latest devel branch that you're missing.

Thanks, I must have made this patch using an older version
of the devel branch. I'll fix this up.

> > Based on work by Laurent Pinchart for the r8a7790 and r8a7791 SoCs.
> > 
> > Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
> > Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
> > ---
> >  arch/arm/boot/dts/r8a7779.dtsi | 8 ++++++++
> >  1 file changed, 8 insertions(+)
> > 
> > diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi
> > index d524b3f..623dd39 100644
> > --- a/arch/arm/boot/dts/r8a7779.dtsi
> > +++ b/arch/arm/boot/dts/r8a7779.dtsi
> > @@ -160,6 +160,7 @@
> >  		reg = <0xffc70000 0x1000>;
> >  		interrupt-parent = <&gic>;
> >  		interrupts = <0 79 IRQ_TYPE_LEVEL_HIGH>;
> > +		clocks = <&mstp0_clks R8A7779_CLK_I2C0>;
> >  		status = "disabled";
> >  	};
> > 
> > @@ -170,6 +171,7 @@
> >  		reg = <0xffc71000 0x1000>;
> >  		interrupt-parent = <&gic>;
> >  		interrupts = <0 82 IRQ_TYPE_LEVEL_HIGH>;
> > +		clocks = <&mstp0_clks R8A7779_CLK_I2C1>;
> >  		status = "disabled";
> >  	};
> > 
> > @@ -180,6 +182,7 @@
> >  		reg = <0xffc72000 0x1000>;
> >  		interrupt-parent = <&gic>;
> >  		interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>;
> > +		clocks = <&mstp0_clks R8A7779_CLK_I2C2>;
> >  		status = "disabled";
> >  	};
> > 
> > @@ -190,6 +193,7 @@
> >  		reg = <0xffc73000 0x1000>;
> >  		interrupt-parent = <&gic>;
> >  		interrupts = <0 81 IRQ_TYPE_LEVEL_HIGH>;
> > +		clocks = <&mstp0_clks R8A7779_CLK_I2C3>;
> >  		status = "disabled";
> >  	};
> > 
> > @@ -215,6 +219,7 @@
> >  		reg = <0xffe4c000 0x100>;
> >  		interrupt-parent = <&gic>;
> >  		interrupts = <0 104 IRQ_TYPE_LEVEL_HIGH>;
> > +		clocks = <&mstp3_clks R8A7779_CLK_SDHI0>;
> >  		cap-sd-highspeed;
> >  		cap-sdio-irq;
> >  		status = "disabled";
> > @@ -225,6 +230,7 @@
> >  		reg = <0xffe4d000 0x100>;
> >  		interrupt-parent = <&gic>;
> >  		interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>;
> > +		clocks = <&mstp3_clks R8A7779_CLK_SDHI1>;
> >  		cap-sd-highspeed;
> >  		cap-sdio-irq;
> >  		status = "disabled";
> > @@ -235,6 +241,7 @@
> >  		reg = <0xffe4e000 0x100>;
> >  		interrupt-parent = <&gic>;
> >  		interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
> > +		clocks = <&mstp3_clks R8A7779_CLK_SDHI2>;
> >  		cap-sd-highspeed;
> >  		cap-sdio-irq;
> >  		status = "disabled";
> > @@ -245,6 +252,7 @@
> >  		reg = <0xffe4f000 0x100>;
> >  		interrupt-parent = <&gic>;
> >  		interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
> > +		clocks = <&mstp3_clks R8A7779_CLK_SDHI3>;
> >  		cap-sd-highspeed;
> >  		cap-sdio-irq;
> >  		status = "disabled";
> -- 
> Regards,
> 
> Laurent Pinchart
>