From mboxrd@z Thu Jan 1 00:00:00 1970 From: vinod.koul@intel.com (Vinod Koul) Date: Thu, 28 Nov 2013 14:11:09 +0530 Subject: [PATCH v7 0/4] Add dual-fifo mode support of i.MX ssi In-Reply-To: References: Message-ID: <20131128084108.GZ8834@intel.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Wed, Nov 13, 2013 at 10:55:23PM +0800, Nicolin Chen wrote: > * ! This series of patches has a direct dependency between them. When > * ! applying them, we need to apply to one single branch. Otherwise, > * ! it would break currect branches. Applied, thanks -- ~Vinod > > Changelog > v7: > * Appended missing Acked-by to all four patches. > * Sorry that I didn't add them at the first place. > v6: > * PATCH-1: Use goto err_firmware instead of return directly. > * > * Nothing changes for the other three ack-ed patches > v5: > * PATCH-3: Add period size constraint when using dual fifo mode > * > * Nothing changes for the other three patches > v4: > * PATCH-3: Drop useless register configuration. > * > * Nothing changes for the other three patches > v3: > * PATCH-1: Add comments to indicate the end of v1 and v2 array. > * PATCH-3: Use better way to keep watermark as even number. > * > * Nothing changes for PATCH-2 and PATCH-4 > v2: > * Instead of adding rogue scripts to current SDMA driver based on firmware > * V1, we define the new SDMA firmware as version 2 and bisect the PATCH-1 > * to two patches: The first is to add version check code to the SDMA driver; > * And the second is to add SSI dual FIFO DMATYPE. > * > * Nothing changes for the last two patches. > v1: > * SSI can reduce hardware overrun/underrun possibility when using dual > * fifo mode. To support this mode, we need to first update sdma sciprt > * list, and then enable dual fifo BIT in SSI driver, and last update DT > * bindings of i.MX series. > > Nicolin Chen (4): > dma: imx-sdma: Add sdma firmware version 2 support > dma: imx-sdma: Add new dma type for ssi dual fifo script > ASoC: fsl_ssi: Add dual fifo mode support > ARM: dts: imx: use dual-fifo sdma script for ssi > > .../devicetree/bindings/dma/fsl-imx-sdma.txt | 1 + > arch/arm/boot/dts/imx51.dtsi | 4 ++-- > arch/arm/boot/dts/imx53.dtsi | 4 ++-- > arch/arm/boot/dts/imx6qdl.dtsi | 12 +++++----- > arch/arm/boot/dts/imx6sl.dtsi | 12 +++++----- > drivers/dma/imx-sdma.c | 19 ++++++++++++++- > include/linux/platform_data/dma-imx-sdma.h | 5 ++++ > include/linux/platform_data/dma-imx.h | 1 + > sound/soc/fsl/fsl_ssi.c | 27 +++++++++++++++++++++- > 9 files changed, 67 insertions(+), 18 deletions(-) > > -- > 1.8.4 > > --