[PATCH 4/7] PCI: imx6: Split away the PHY reset

[marex@denx.de (Marek Vasut)]

Dear Harro Haan,

> On 26 November 2013 22:10, Marek Vasut <marex@denx.de> wrote:
> > Split the PCIe PHY reset from the link up function to make
> > the code a little more structured.
> > 
> > Signed-off-by: Marek Vasut <marex@denx.de>
> > Cc: Bjorn Helgaas <bhelgaas@google.com>
> > Cc: Frank Li <lznuaa@gmail.com>
> > Cc: Harro Haan <hrhaan@gmail.com>
> > Cc: Jingoo Han <jg1.han@samsung.com>
> > Cc: Mohit KUMAR <Mohit.KUMAR@st.com>
> > Cc: Pratyush Anand <pratyush.anand@st.com>
> > Cc: Richard Zhu <r65037@freescale.com>
> > Cc: Sascha Hauer <s.hauer@pengutronix.de>
> > Cc: Sean Cross <xobs@kosagi.com>
> > Cc: Shawn Guo <shawn.guo@linaro.org>
> > Cc: Siva Reddy Kallam <siva.kallam@samsung.com>
> > Cc: Srikanth T Shivanand <ts.srikanth@samsung.com>
> > Cc: Tim Harvey <tharvey@gateworks.com>
> > Cc: Troy Kisky <troy.kisky@boundarydevices.com>
> > Cc: Yinghai Lu <yinghai@kernel.org>
> > ---
> > 
> >  drivers/pci/host/pci-imx6.c | 33 ++++++++++++++++++---------------
> >  1 file changed, 18 insertions(+), 15 deletions(-)
> > 
> > diff --git a/drivers/pci/host/pci-imx6.c b/drivers/pci/host/pci-imx6.c
> > index 4d5be4e..a9781e7 100644
> > --- a/drivers/pci/host/pci-imx6.c
> > +++ b/drivers/pci/host/pci-imx6.c
> > @@ -336,6 +336,23 @@ static void imx6_pcie_host_init(struct pcie_port
> > *pp)
> > 
> >         return;
> >  
> >  }
> > 
> > +static void imx6_pcie_reset_phy(struct pcie_port *pp)
> > +{
> > +       uint32_t temp;
> > +
> > +       pcie_phy_read(pp->dbi_base, PHY_RX_OVRD_IN_LO, &temp);
> > +       temp |= (PHY_RX_OVRD_IN_LO_RX_DATA_EN |
> > +                PHY_RX_OVRD_IN_LO_RX_PLL_EN);
> > +       pcie_phy_write(pp->dbi_base, PHY_RX_OVRD_IN_LO, temp);
> > +
> > +       usleep_range(2000, 3000);
> > +
> > +       pcie_phy_read(pp->dbi_base, PHY_RX_OVRD_IN_LO, &temp);
> > +       temp &= ~(PHY_RX_OVRD_IN_LO_RX_DATA_EN |
> > +                 PHY_RX_OVRD_IN_LO_RX_PLL_EN);
> > +       pcie_phy_write(pp->dbi_base, PHY_RX_OVRD_IN_LO, temp);
> > +}
> > +
> > 
> >  static int imx6_pcie_link_up(struct pcie_port *pp)
> >  {
> >  
> >         u32 rc, ltssm, rx_valid, temp;
> > 
> > @@ -370,21 +387,7 @@ static int imx6_pcie_link_up(struct pcie_port *pp)
> > 
> >         dev_err(pp->dev, "transition to gen2 is stuck, reset PHY!\n");
> > 
> > -       pcie_phy_read(pp->dbi_base,
> > -               PHY_RX_OVRD_IN_LO, &temp);
> > -       temp |= (PHY_RX_OVRD_IN_LO_RX_DATA_EN
> > -               | PHY_RX_OVRD_IN_LO_RX_PLL_EN);
> > -       pcie_phy_write(pp->dbi_base,
> > -               PHY_RX_OVRD_IN_LO, temp);
> > -
> > -       usleep_range(2000, 3000);
> > -
> > -       pcie_phy_read(pp->dbi_base,
> > -               PHY_RX_OVRD_IN_LO, &temp);
> > -       temp &= ~(PHY_RX_OVRD_IN_LO_RX_DATA_EN
> > -               | PHY_RX_OVRD_IN_LO_RX_PLL_EN);
> > -       pcie_phy_write(pp->dbi_base,
> > -               PHY_RX_OVRD_IN_LO, temp);
> > +       imx6_pcie_reset_phy(pp);
> > 
> >         return 0;
> >  
> >  }
> > 
> > --
> > 1.8.4.3
> 
> Thanks Marek,
> 
> A minor:
> drivers/pci/host/pci-imx6.c: In function 'imx6_pcie_link_up':
> drivers/pci/host/pci-imx6.c:353:27: warning: unused variable 'temp'
> [-Wunused-variable]
> 
> See the following mail for more info which tests I did with patch 1/7,
> 3/7, 4/7, 5/7 and 6/7:
> http://lists.infradead.org/pipermail/linux-arm-kernel/2013-November/214640.
> html

Thanks for the find and testing!