linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: steve.capper@linaro.org (Steve Capper)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 0/3] Simplify set_huge_pte_at, pte_same for LPAE
Date: Tue, 3 Dec 2013 13:46:24 +0000	[thread overview]
Message-ID: <20131203134623.GA24994@linaro.org> (raw)
In-Reply-To: <1384882529-28104-1-git-send-email-steve.capper@linaro.org>

On Tue, Nov 19, 2013 at 05:35:26PM +0000, Steve Capper wrote:
> Hello,
> The following patch series is my attempt at fixing a rather nasty bug
> which became visible in 3.12-rc1 when running the libhugetlbfs test
> suite. (This problem only just came to my attention yesterday).
> 
> For LPAE, set_huge_pte_at calls set_pte_at which then calls
> set_pte_ext, which in turn is wired up to call cpu_v7_set_pte_ext,
> which is defined in proc-v7-3level.S.
> 
> For huge pages, given newprot a pgprot_t value for a shared writable
> VMA, and ptep a pointer to a pte belonging to this VMA; the following
> behaviour is assumed by core code:
>    hugetlb_change_protection(vma, address, end, newprot);
>    ...
> 
>    huge_pte_write(huge_ptep_get(ptep)); /* should be true! */
> 
> Unfortunately, cpu_v7_set_pte_ext will change the bit layout of the
> resultant pte, and will set the read only bit if the dirty bit is not
> also enabled.
> 
> If one were to allocate a read only shared huge page, then fault it in,
> and then mprotect it to be writeable. A subsequent write to that huge
> page will result in a spurious call to hugetlb_cow, which causes
> corruption. This call is optimised away prior to:
>  37a2140 mm, hugetlb: do not use a page in page cache for cow
>          optimization
> 
> If one runs the libhugetlbfs test suite on v3.12-rc1 upwards, then the
> mprotect test will cause the afformentioned corruption and before the
> set of tests completes, the system will be left in an unresponsive
> state. (calls to fork fail with -ENOMEM).
> 
> This was an absolute pig to debug and, as this is the second time I've
> ran into issues caused by ptes being modified in transit, I've opted to
> re-implement set_huge_pte_at such that it just dereferences the pte.
> (in a similar manner as arm64). This has also allowed me to revert the
> pte_same logic change (that removed the NG bit from comparison), by
> also setting the NG bit for all new huge ptes.
> 
> These patches are against 3.12, and I have tested this series on an
> Arndale board with LPAE running libhugetlbfs.
> 
> I would really value any comments/critique/flames on this series.
> Especially as I've ommitted the DCCMVAC at the end of set_huge_pte_at
> as I couldn't see why it was needed, please yell at me if it is needed!
> :-)
> 
> Cheers,
> -- 
> Steve

Hi,
A question has been raised for the arm64 analogue of this series as to
whether or not this is the best approach:
http://lists.infradead.org/pipermail/linux-arm-kernel/2013-November/215155.html

I am having a think about this, and will send out a V2 once my brain
has caught up. :-)

Cheers,
-- 
Steve

  parent reply	other threads:[~2013-12-03 13:46 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-11-19 17:35 [PATCH 0/3] Simplify set_huge_pte_at, pte_same for LPAE Steve Capper
2013-11-19 17:35 ` [PATCH 1/3] ARM: mm: Rewire LPAE set_huge_pte_at Steve Capper
2013-11-19 17:35 ` [PATCH 2/3] ARM: mm: Make LPAE huge page ptes NG by default Steve Capper
2013-11-19 17:35 ` [PATCH 3/3] Revert "ARM: mm: correct pte_same behaviour for LPAE." Steve Capper
2013-11-19 18:02 ` [PATCH 0/3] Simplify set_huge_pte_at, pte_same for LPAE Christoffer Dall
2013-12-03 13:46 ` Steve Capper [this message]
2013-12-03 15:09   ` Catalin Marinas

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20131203134623.GA24994@linaro.org \
    --to=steve.capper@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).