From mboxrd@z Thu Jan 1 00:00:00 1970 From: ezequiel.garcia@free-electrons.com (Ezequiel Garcia) Date: Thu, 5 Dec 2013 19:24:31 -0300 Subject: [PATCH v5 00/14] Armada 370/XP NAND supportg In-Reply-To: <87d2lbrpvy.fsf@natisbad.org> References: <20131128185040.GA13182@localhost> <87bo12kcyt.fsf@natisbad.org> <20131202103305.GB2466@localhost> <87siubneuf.fsf@natisbad.org> <20131203002225.GA5333@localhost> <87ob4xbs8l.fsf@natisbad.org> <87iov5aapx.fsf@natisbad.org> <20131204142009.GB2486@localhost> <87haaogx6j.fsf@natisbad.org> <87d2lbrpvy.fsf@natisbad.org> Message-ID: <20131205222430.GB2469@localhost> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Thu, Dec 05, 2013 at 09:42:25PM +0100, Arnaud Ebalard wrote: > Hi Ezequiel, > > arno at natisbad.org (Arnaud Ebalard) writes: > > > Could you try and dump the block to another flash. As I don't think I can > > attach a binary blob to this email, can you drop the following in a > > python shell: > > > > l = ["55 42 49 23 01 00 00 00 00 00 00 00 00 00 00 02", > > "00 00 08 00 00 00 10 00 16 9a 76 a5 00 00 00 00", > > "00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00", > > "00 00 00 00 00 00 00 00 00 00 00 00 65 9c 26 3a", > > "00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00"*0x7b, > > "00 00 00 00 00 00 00 00 00 00 00 02 00 00 00 00", > > "ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff", > > "ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff"*0x1f7f] > > > > open("/tmp/block.raw", "w").write("".join(l).replace(' ', '').decode("hex")) > > > > FWIW, you should have the following sha256 for the file: > > d3e5534e054f2ab1220194c434d90fbfe9580459de887016db8e308739aa3a7b > > > > If you have any additional idea, I am interested. I have no more time > > this evening to test the other debug patch you sent but I will > > definitely give it a try tomorrow. > > I reused the block above to test on the kernel w/ your debug patch > applied: > > root at thin:~# python > Python 2.7.6 (default, Nov 19 2013, 18:53:23) > [GCC 4.8.2] on linux2 > Type "help", "copyright", "credits" or "license" for more information. > l = ["55 42 49 23 01 00 00 00 00 00 00 00 00 00 00 02", > "00 00 08 00 00 00 10 00 16 9a 76 a5 00 00 00 00", > "00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00", > "00 00 00 00 00 00 00 00 00 00 00 00 65 9c 26 3a", > "00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00"*0x7b, > "00 00 00 00 00 00 00 00 00 00 00 02 00 00 00 00", > "ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff", > "ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff"*0x1f7f] > > >>> l = ["55 42 49 23 01 00 00 00 00 00 00 00 00 00 00 02", > ... "00 00 08 00 00 00 10 00 16 9a 76 a5 00 00 00 00", > ... "00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00", > ... "00 00 00 00 00 00 00 00 00 00 00 00 65 9c 26 3a", > ... "00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00"*0x7b, > ... "00 00 00 00 00 00 00 00 00 00 00 02 00 00 00 00", > ... "ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff", > ... "ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff"*0x1f7f] > >>> > >>> open("/tmp/block.raw", "w").write("".join(l).replace(' ', '').decode("hex")) root at thin:~# > > root at thin:/sys/kernel/debug/dynamic_debug# flash_erase /dev/mtd4 0 1 > Erasing 128 Kibyte @ 0 -- 100 % complete > > root at thin:/sys/kernel/debug/dynamic_debug# nandwrite /dev/mtd4 /tmp/block.raw > Writing data to block 0 at offset 0x0 > [ 784.543390] pxa3xx-nand d00d0000.nand: Ready time out!!! > libmtd: error!: cannot write 2048 bytes to mtd4 (eraseblock 0, offset 2048) > error 5 (Input/output error) > Erasing failed write from 00000000 to 0x01ffff > Writing data to block 1 at offset 0x20000 > [ 784.743391] pxa3xx-nand d00d0000.nand: Ready time out!!! > libmtd: error!: cannot write 2048 bytes to mtd4 (eraseblock 1, offset 2048) > error 5 (Input/output error) > Erasing failed write from 0x020000 to 0x03ffff > Writing data to block 2 at offset 0x40000 > [ 784.943390] pxa3xx-nand d00d0000.nand: Ready time out!!! > libmtd: error!: cannot write 2048 bytes to mtd4 (eraseblock 2, offset 2048) > error 5 (Input/output error) > Erasing failed write from 0x040000 to 0x05ffff > Writing data to block 3 at offset 0x60000 > [ 785.143391] pxa3xx-nand d00d0000.nand: Ready time out!!! > libmtd: error!: cannot write 2048 bytes to mtd4 (eraseblock 3, offset 2048) > error 5 (Input/output error) > Erasing failed write from 0x060000 to 0x07ffff > Writing data to block 4 at offset 0x80000 > [ 785.343388] pxa3xx-nand d00d0000.nand: Ready time out!!! > libmtd: error!: cannot write 2048 bytes to mtd4 (eraseblock 4, offset 2048) > error 5 (Input/output error) > Erasing failed write from 0x080000 to 0x09ffff > Writing data to block 5 at offset 0xa0000 > [ 785.543390] pxa3xx-nand d00d0000.nand: Ready time out!!! > libmtd: error!: cannot write 2048 bytes to mtd4 (eraseblock 5, offset 2048) > error 5 (Input/output error) > Erasing failed write from 0x0a0000 to 0x0bffff > Writing data to block 6 at offset 0xc0000 > [ 785.743390] pxa3xx-nand d00d0000.nand: Ready time out!!! > libmtd: error!: cannot write 2048 bytes to mtd4 (eraseblock 6, offset 2048) > error 5 (Input/output error) > Erasing failed write from 0x0c0000 to 0x0dffff > Writing data to block 7 at offset 0xe0000 > > And here is what I get in kernel logs: > > [ 766.262816] Command0 0x810070 > [ 766.262827] Command1 0x0 > [ 766.262833] Command2 0x0 > [ 766.262838] Command3 0x0 > [ 766.262853] Command0 0x24bd060 > [ 766.262858] Command1 0x1800 > [ 766.262863] Command2 0x0 > [ 766.262868] Command3 0x0 > [ 766.263617] Status: ready > [ 766.263937] Waiting for device to be ready > [ 766.263945] Device is ready > [ 784.345577] Command0 0x810070 > [ 784.345588] Command1 0x0 > [ 784.345594] Command2 0x0 > [ 784.345599] Command3 0x0 > [ 784.345626] Command0 0x62c1080 > [ 784.345632] Command1 0x18000000 > [ 784.345637] Command2 0x0 > [ 784.345642] Command3 0x0 > [ 784.345960] Status: ready > [ 784.345976] Waiting for device to be ready > [ 784.345981] Device is ready > [ 784.346006] Command0 0x810070 > [ 784.346012] Command1 0x0 > [ 784.346017] Command2 0x0 > [ 784.346022] Command3 0x0 > [ 784.346044] Waiting for device to be ready > [ 784.543390] pxa3xx-nand d00d0000.nand: Ready time out!!! > [ 784.548850] Command0 0x810070 > [ 784.548857] Command1 0x0 > [ 784.548863] Command2 0x0 > [ 784.548868] Command3 0x0 > [ 784.548888] Command0 0x24bd060 > [ 784.548893] Command1 0x1800 > [ 784.548898] Command2 0x0 > [ 784.548903] Command3 0x0 > [ 784.549648] Status: ready > [ 784.549661] Waiting for device to be ready > [ 784.549667] Device is ready > [ 784.549701] Command0 0x810070 > [ 784.549707] Command1 0x0 > [ 784.549712] Command2 0x0 > [ 784.549716] Command3 0x0 > [ 784.549736] Command0 0x62c1080 > [ 784.549742] Command1 0x18400000 > [ 784.549747] Command2 0x0 > [ 784.549751] Command3 0x0 > [ 784.550074] Status: ready > [ 784.550087] Waiting for device to be ready > [ 784.550093] Device is ready > [ 784.550109] Command0 0x810070 > [ 784.550115] Command1 0x0 > [ 784.550119] Command2 0x0 > [ 784.550124] Command3 0x0 > [ 784.550146] Waiting for device to be ready > [ 784.743391] pxa3xx-nand d00d0000.nand: Ready time out!!! > [ 784.748780] Command0 0x810070 > [ 784.748786] Command1 0x0 > [ 784.748792] Command2 0x0 > [ 784.748797] Command3 0x0 > [ 784.748815] Command0 0x24bd060 > [ 784.748821] Command1 0x1840 > [ 784.748826] Command2 0x0 > [ 784.748831] Command3 0x0 > [ 784.749575] Status: ready > [ 784.749589] Waiting for device to be ready > [ 784.749595] Device is ready > [ 784.749628] Command0 0x810070 > [ 784.749634] Command1 0x0 > [ 784.749639] Command2 0x0 > [ 784.749644] Command3 0x0 > [ 784.749663] Command0 0x62c1080 > [ 784.749669] Command1 0x18800000 > [ 784.749674] Command2 0x0 > [ 784.749679] Command3 0x0 > [ 784.749995] Status: ready > [ 784.750007] Waiting for device to be ready > [ 784.750013] Device is ready > [ 784.750028] Command0 0x810070 > > > So let's now do the same with a fully random block: > > root at thin:/# dd if=/dev/urandom of=/tmp/block.random bs=131072 count=1 > 1+0 records in > 1+0 records out > 131072 bytes (131 kB) copied, 0.0406636 s, 3.2 MB/s > > root at thin:~# flash_erase /dev/mtd4 0 1 > Erasing 128 Kibyte @ 0 -- 100 % complete > > root at thin:~# nandwrite /dev/mtd4 /tmp/block.random > Writing data to block 0 at offset 0x0 > > In the log, I get the following: > > [ 1422.296953] Command0 0x810070 > [ 1422.296965] Command1 0x0 > [ 1422.296970] Command2 0x0 > [ 1422.296975] Command3 0x0 > [ 1422.296990] Command0 0x24bd060 > [ 1422.296996] Command1 0x1800 > [ 1422.297001] Command2 0x0 > [ 1422.297006] Command3 0x0 > [ 1422.297752] Status: ready > [ 1422.297767] Waiting for device to be ready > [ 1422.297773] Device is ready > [ 1488.147298] Command0 0x810070 > [ 1488.147310] Command1 0x0 > [ 1488.147316] Command2 0x0 > [ 1488.147321] Command3 0x0 > [ 1488.147340] Command0 0x62c1080 > [ 1488.147345] Command1 0x18000000 > [ 1488.147350] Command2 0x0 > [ 1488.147355] Command3 0x0 > [ 1488.147673] Status: ready > [ 1488.147689] Waiting for device to be ready > [ 1488.147695] Device is ready > [ 1488.147720] Command0 0x810070 > [ 1488.147725] Command1 0x0 > [ 1488.147730] Command2 0x0 > [ 1488.147735] Command3 0x0 > [ 1488.147754] Command0 0x62c1080 > [ 1488.147759] Command1 0x18010000 > [ 1488.147764] Command2 0x0 > [ 1488.147769] Command3 0x0 > [ 1488.148085] Status: ready > [ 1488.148098] Waiting for device to be ready > [ 1488.148103] Device is ready > [ 1488.148125] Command0 0x810070 > [ 1488.148130] Command1 0x0 > [ 1488.148135] Command2 0x0 > [ 1488.148140] Command3 0x0 > [ 1488.148158] Command0 0x62c1080 > [ 1488.148164] Command1 0x18020000 > [ 1488.148169] Command2 0x0 > [ 1488.148174] Command3 0x0 > [ 1488.148490] Status: ready > [ 1488.148503] Waiting for device to be ready > [ 1488.148508] Device is ready > [ 1488.148537] Command0 0x810070 > [ 1488.148543] Command1 0x0 > [ 1488.148548] Command2 0x0 > [ 1488.148553] Command3 0x0 > [ 1488.148567] Command0 0x62c1080 > [ 1488.148572] Command1 0x18030000 > [ 1488.148577] Command2 0x0 > [ 1488.148582] Command3 0x0 > [ 1488.148955] Status: ready > [ 1488.148968] Waiting for device to be ready > [ 1488.148973] Device is ready > [ 1488.148995] Command0 0x810070 > [ 1488.149001] Command1 0x0 > [ 1488.149006] Command2 0x0 > [ 1488.149011] Command3 0x0 > [ 1488.149029] Command0 0x62c1080 > [ 1488.149035] Command1 0x18040000 > [ 1488.149039] Command2 0x0 > [ 1488.149044] Command3 0x0 > [ 1488.149417] Status: ready > [ 1488.149429] Waiting for device to be ready > [ 1488.149434] Device is ready > [ 1488.149456] Command0 0x810070 > [ 1488.149462] Command1 0x0 > [ 1488.149466] Command2 0x0 > [ 1488.149471] Command3 0x0 > [ 1488.149486] Command0 0x62c1080 > [ 1488.149491] Command1 0x18050000 > [ 1488.149496] Command2 0x0 > [ 1488.149501] Command3 0x0 > [ 1488.149817] Status: ready > [ 1488.149830] Waiting for device to be ready > [ 1488.149835] Device is ready > [ 1488.149857] Command0 0x810070 > [ 1488.149863] Command1 0x0 > [ 1488.149867] Command2 0x0 > [ 1488.149872] Command3 0x0 > [ 1488.149891] Command0 0x62c1080 > [ 1488.149896] Command1 0x18060000 > [ 1488.149901] Command2 0x0 > [ 1488.149906] Command3 0x0 > [ 1488.150279] Status: ready > [ 1488.150292] Waiting for device to be ready > [ 1488.150297] Device is ready > [ 1488.150319] Command0 0x810070 > [ 1488.150325] Command1 0x0 > [ 1488.150330] Command2 0x0 > [ 1488.150334] Command3 0x0 > [ 1488.150353] Command0 0x62c1080 > [ 1488.150359] Command1 0x18070000 > [ 1488.150363] Command2 0x0 > [ 1488.150368] Command3 0x0 > [ 1488.150685] Status: ready > [ 1488.150697] Waiting for device to be ready > [ 1488.150702] Device is ready > > If you had the time to test the offending block on another device, did > you manage to reproduce what I get? > Thanks for the command trace! I'll look at this in detail tomorrow and let you know. -- Ezequiel Garc?a, Free Electrons Embedded Linux, Kernel and Android Engineering http://free-electrons.com