* OMAP still fails - usb phy stuff @ 2013-12-10 13:09 Russell King - ARM Linux 2013-12-10 18:38 ` Tony Lindgren 0 siblings, 1 reply; 8+ messages in thread From: Russell King - ARM Linux @ 2013-12-10 13:09 UTC (permalink / raw) To: linux-arm-kernel I still see some OMAP randconfigs failing with this: arch/arm/mach-omap2/built-in.o: In function `usbhs_init_phys': dss-common.c:(.text+0x1396c): undefined reference to `usb_bind_phy' arch/arm/mach-omap2/built-in.o: In function `omap_2430sdp_init': dss-common.c:(.init.text+0x6c90): undefined reference to `usb_bind_phy' drivers/built-in.o: In function `omap_usb2_remove': powercap_sys.c:(.text+0x3520): undefined reference to `usb_remove_phy' drivers/built-in.o: In function `omap_usb_power_off': powercap_sys.c:(.text+0x3544): undefined reference to `omap_control_usb_phy_power' drivers/built-in.o: In function `omap_usb_power_on': powercap_sys.c:(.text+0x3568): undefined reference to `omap_control_usb_phy_power' drivers/built-in.o: In function `omap_usb2_probe': powercap_sys.c:(.text+0x3638): undefined reference to `omap_control_usb_phy_power' powercap_sys.c:(.text+0x36d4): undefined reference to `usb_add_phy_dev' drivers/built-in.o: In function `omap_usb2_suspend': powercap_sys.c:(.text+0x37d0): undefined reference to `omap_control_usb_phy_power' powercap_sys.c:(.text+0x37f4): undefined reference to `omap_control_usb_phy_power' drivers/built-in.o: In function `omap_usb2_set_comparator': powercap_sys.c:(.text+0x3844): undefined reference to `usb_get_phy' drivers/built-in.o: In function `isp1704_charger_remove': powercap_sys.c:(.text+0x48d5ec): undefined reference to `usb_put_phy' drivers/built-in.o: In function `isp1704_charger_probe': powercap_sys.c:(.text+0x48d64c): undefined reference to `usb_get_phy' powercap_sys.c:(.text+0x48d884): undefined reference to `usb_put_phy' drivers/built-in.o: In function `twl4030_bci_probe': powercap_sys.c:(.init.text+0x13fd4): undefined reference to `usb_get_phy' powercap_sys.c:(.init.text+0x14114): undefined reference to `usb_put_phy' Probably caused by over-use of the damned select statement: warning: (OMAP_USB2 && TWL4030_USB) selects USB_PHY which has unmet direct dependencies (USB_SUPPORT) warning: (OMAP_USB2) selects OMAP_CONTROL_USB which has unmet direct dependencies (USB_SUPPORT && (ARCH_OMAP2PLUS || COMPILE_TEST)) warning: (OMAP_USB2 && TWL4030_USB) selects USB_PHY which has unmet direct dependencies (USB_SUPPORT) warning: (OMAP_USB2) selects OMAP_CONTROL_USB which has unmet direct dependencies (USB_SUPPORT && (ARCH_OMAP2PLUS || COMPILE_TEST)) You have to wonder why OMAP_USB2 can be enabled when USB_SUPPORT is disabled. ^ permalink raw reply [flat|nested] 8+ messages in thread
* OMAP still fails - usb phy stuff 2013-12-10 13:09 OMAP still fails - usb phy stuff Russell King - ARM Linux @ 2013-12-10 18:38 ` Tony Lindgren 2013-12-10 19:25 ` Felipe Balbi 2013-12-10 19:26 ` Greg KH 0 siblings, 2 replies; 8+ messages in thread From: Tony Lindgren @ 2013-12-10 18:38 UTC (permalink / raw) To: linux-arm-kernel * Russell King - ARM Linux <linux@arm.linux.org.uk> [131210 05:10]: > I still see some OMAP randconfigs failing with this: > > arch/arm/mach-omap2/built-in.o: In function `usbhs_init_phys': > dss-common.c:(.text+0x1396c): undefined reference to `usb_bind_phy' > arch/arm/mach-omap2/built-in.o: In function `omap_2430sdp_init': > dss-common.c:(.init.text+0x6c90): undefined reference to `usb_bind_phy' > drivers/built-in.o: In function `omap_usb2_remove': > powercap_sys.c:(.text+0x3520): undefined reference to `usb_remove_phy' > drivers/built-in.o: In function `omap_usb_power_off': > powercap_sys.c:(.text+0x3544): undefined reference to `omap_control_usb_phy_power' > drivers/built-in.o: In function `omap_usb_power_on': > powercap_sys.c:(.text+0x3568): undefined reference to `omap_control_usb_phy_power' > drivers/built-in.o: In function `omap_usb2_probe': > powercap_sys.c:(.text+0x3638): undefined reference to `omap_control_usb_phy_power' > powercap_sys.c:(.text+0x36d4): undefined reference to `usb_add_phy_dev' > drivers/built-in.o: In function `omap_usb2_suspend': > powercap_sys.c:(.text+0x37d0): undefined reference to `omap_control_usb_phy_power' > powercap_sys.c:(.text+0x37f4): undefined reference to `omap_control_usb_phy_power' > drivers/built-in.o: In function `omap_usb2_set_comparator': > powercap_sys.c:(.text+0x3844): undefined reference to `usb_get_phy' > drivers/built-in.o: In function `isp1704_charger_remove': > powercap_sys.c:(.text+0x48d5ec): undefined reference to `usb_put_phy' > drivers/built-in.o: In function `isp1704_charger_probe': > powercap_sys.c:(.text+0x48d64c): undefined reference to `usb_get_phy' > powercap_sys.c:(.text+0x48d884): undefined reference to `usb_put_phy' > drivers/built-in.o: In function `twl4030_bci_probe': > powercap_sys.c:(.init.text+0x13fd4): undefined reference to `usb_get_phy' > powercap_sys.c:(.init.text+0x14114): undefined reference to `usb_put_phy' > > Probably caused by over-use of the damned select statement: > > warning: (OMAP_USB2 && TWL4030_USB) selects USB_PHY which has unmet direct dependencies (USB_SUPPORT) > warning: (OMAP_USB2) selects OMAP_CONTROL_USB which has unmet direct dependencies (USB_SUPPORT && (ARCH_OMAP2PLUS || COMPILE_TEST)) > warning: (OMAP_USB2 && TWL4030_USB) selects USB_PHY which has unmet direct dependencies (USB_SUPPORT) > warning: (OMAP_USB2) selects OMAP_CONTROL_USB which has unmet direct dependencies (USB_SUPPORT && (ARCH_OMAP2PLUS || COMPILE_TEST)) > > You have to wonder why OMAP_USB2 can be enabled when USB_SUPPORT is > disabled. Yeah this causes constant randconfig errors. Felipe, I thought you had some fixes lined up for these few weeks ago already when we last talked about it? Regards, Tony ^ permalink raw reply [flat|nested] 8+ messages in thread
* OMAP still fails - usb phy stuff 2013-12-10 18:38 ` Tony Lindgren @ 2013-12-10 19:25 ` Felipe Balbi 2013-12-10 20:16 ` Felipe Balbi 2013-12-10 19:26 ` Greg KH 1 sibling, 1 reply; 8+ messages in thread From: Felipe Balbi @ 2013-12-10 19:25 UTC (permalink / raw) To: linux-arm-kernel On Tue, Dec 10, 2013 at 10:38:10AM -0800, Tony Lindgren wrote: > * Russell King - ARM Linux <linux@arm.linux.org.uk> [131210 05:10]: > > I still see some OMAP randconfigs failing with this: > > > > arch/arm/mach-omap2/built-in.o: In function `usbhs_init_phys': > > dss-common.c:(.text+0x1396c): undefined reference to `usb_bind_phy' > > arch/arm/mach-omap2/built-in.o: In function `omap_2430sdp_init': > > dss-common.c:(.init.text+0x6c90): undefined reference to `usb_bind_phy' > > drivers/built-in.o: In function `omap_usb2_remove': > > powercap_sys.c:(.text+0x3520): undefined reference to `usb_remove_phy' > > drivers/built-in.o: In function `omap_usb_power_off': > > powercap_sys.c:(.text+0x3544): undefined reference to `omap_control_usb_phy_power' > > drivers/built-in.o: In function `omap_usb_power_on': > > powercap_sys.c:(.text+0x3568): undefined reference to `omap_control_usb_phy_power' > > drivers/built-in.o: In function `omap_usb2_probe': > > powercap_sys.c:(.text+0x3638): undefined reference to `omap_control_usb_phy_power' > > powercap_sys.c:(.text+0x36d4): undefined reference to `usb_add_phy_dev' > > drivers/built-in.o: In function `omap_usb2_suspend': > > powercap_sys.c:(.text+0x37d0): undefined reference to `omap_control_usb_phy_power' > > powercap_sys.c:(.text+0x37f4): undefined reference to `omap_control_usb_phy_power' > > drivers/built-in.o: In function `omap_usb2_set_comparator': > > powercap_sys.c:(.text+0x3844): undefined reference to `usb_get_phy' > > drivers/built-in.o: In function `isp1704_charger_remove': > > powercap_sys.c:(.text+0x48d5ec): undefined reference to `usb_put_phy' > > drivers/built-in.o: In function `isp1704_charger_probe': > > powercap_sys.c:(.text+0x48d64c): undefined reference to `usb_get_phy' > > powercap_sys.c:(.text+0x48d884): undefined reference to `usb_put_phy' > > drivers/built-in.o: In function `twl4030_bci_probe': > > powercap_sys.c:(.init.text+0x13fd4): undefined reference to `usb_get_phy' > > powercap_sys.c:(.init.text+0x14114): undefined reference to `usb_put_phy' > > > > Probably caused by over-use of the damned select statement: > > > > warning: (OMAP_USB2 && TWL4030_USB) selects USB_PHY which has unmet direct dependencies (USB_SUPPORT) > > warning: (OMAP_USB2) selects OMAP_CONTROL_USB which has unmet direct dependencies (USB_SUPPORT && (ARCH_OMAP2PLUS || COMPILE_TEST)) > > warning: (OMAP_USB2 && TWL4030_USB) selects USB_PHY which has unmet direct dependencies (USB_SUPPORT) > > warning: (OMAP_USB2) selects OMAP_CONTROL_USB which has unmet direct dependencies (USB_SUPPORT && (ARCH_OMAP2PLUS || COMPILE_TEST)) > > > > You have to wonder why OMAP_USB2 can be enabled when USB_SUPPORT is > > disabled. > > Yeah this causes constant randconfig errors. Felipe, I thought you > had some fixes lined up for these few weeks ago already when we > last talked about it? For the warnings, yeah. Greg's pull request hasn't been appliet yet (need to check again, checked yesterday). For the build error, I'll send something today. -- balbi -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20131210/dfcbea7d/attachment.sig> ^ permalink raw reply [flat|nested] 8+ messages in thread
* OMAP still fails - usb phy stuff 2013-12-10 19:25 ` Felipe Balbi @ 2013-12-10 20:16 ` Felipe Balbi 2013-12-10 20:20 ` Felipe Balbi 0 siblings, 1 reply; 8+ messages in thread From: Felipe Balbi @ 2013-12-10 20:16 UTC (permalink / raw) To: linux-arm-kernel Hi, On Tue, Dec 10, 2013 at 01:25:08PM -0600, Felipe Balbi wrote: > On Tue, Dec 10, 2013 at 10:38:10AM -0800, Tony Lindgren wrote: > > * Russell King - ARM Linux <linux@arm.linux.org.uk> [131210 05:10]: > > > I still see some OMAP randconfigs failing with this: > > > > > > arch/arm/mach-omap2/built-in.o: In function `usbhs_init_phys': > > > dss-common.c:(.text+0x1396c): undefined reference to `usb_bind_phy' > > > arch/arm/mach-omap2/built-in.o: In function `omap_2430sdp_init': > > > dss-common.c:(.init.text+0x6c90): undefined reference to `usb_bind_phy' > > > drivers/built-in.o: In function `omap_usb2_remove': > > > powercap_sys.c:(.text+0x3520): undefined reference to `usb_remove_phy' > > > drivers/built-in.o: In function `omap_usb_power_off': > > > powercap_sys.c:(.text+0x3544): undefined reference to `omap_control_usb_phy_power' > > > drivers/built-in.o: In function `omap_usb_power_on': > > > powercap_sys.c:(.text+0x3568): undefined reference to `omap_control_usb_phy_power' > > > drivers/built-in.o: In function `omap_usb2_probe': > > > powercap_sys.c:(.text+0x3638): undefined reference to `omap_control_usb_phy_power' > > > powercap_sys.c:(.text+0x36d4): undefined reference to `usb_add_phy_dev' > > > drivers/built-in.o: In function `omap_usb2_suspend': > > > powercap_sys.c:(.text+0x37d0): undefined reference to `omap_control_usb_phy_power' > > > powercap_sys.c:(.text+0x37f4): undefined reference to `omap_control_usb_phy_power' > > > drivers/built-in.o: In function `omap_usb2_set_comparator': > > > powercap_sys.c:(.text+0x3844): undefined reference to `usb_get_phy' > > > drivers/built-in.o: In function `isp1704_charger_remove': > > > powercap_sys.c:(.text+0x48d5ec): undefined reference to `usb_put_phy' > > > drivers/built-in.o: In function `isp1704_charger_probe': > > > powercap_sys.c:(.text+0x48d64c): undefined reference to `usb_get_phy' > > > powercap_sys.c:(.text+0x48d884): undefined reference to `usb_put_phy' > > > drivers/built-in.o: In function `twl4030_bci_probe': > > > powercap_sys.c:(.init.text+0x13fd4): undefined reference to `usb_get_phy' > > > powercap_sys.c:(.init.text+0x14114): undefined reference to `usb_put_phy' > > > > > > Probably caused by over-use of the damned select statement: > > > > > > warning: (OMAP_USB2 && TWL4030_USB) selects USB_PHY which has unmet direct dependencies (USB_SUPPORT) > > > warning: (OMAP_USB2) selects OMAP_CONTROL_USB which has unmet direct dependencies (USB_SUPPORT && (ARCH_OMAP2PLUS || COMPILE_TEST)) > > > warning: (OMAP_USB2 && TWL4030_USB) selects USB_PHY which has unmet direct dependencies (USB_SUPPORT) > > > warning: (OMAP_USB2) selects OMAP_CONTROL_USB which has unmet direct dependencies (USB_SUPPORT && (ARCH_OMAP2PLUS || COMPILE_TEST)) > > > > > > You have to wonder why OMAP_USB2 can be enabled when USB_SUPPORT is > > > disabled. > > > > Yeah this causes constant randconfig errors. Felipe, I thought you > > had some fixes lined up for these few weeks ago already when we > > last talked about it? > > For the warnings, yeah. Greg's pull request hasn't been appliet yet > (need to check again, checked yesterday). > > For the build error, I'll send something today. this should fix it (checked with RMK's defconfig): diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig index a344f3d..d8b1a9a 100644 --- a/drivers/phy/Kconfig +++ b/drivers/phy/Kconfig @@ -24,9 +24,9 @@ config PHY_EXYNOS_MIPI_VIDEO config OMAP_USB2 tristate "OMAP USB2 PHY Driver" depends on ARCH_OMAP2PLUS + depends on OMAP_CONTROL_USB select GENERIC_PHY select USB_PHY - select OMAP_CONTROL_USB help Enable this to support the transceiver that is part of SOC. This driver takes care of all the PHY functionality apart from comparator. i'll send it as a proper patch now. -- balbi -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20131210/a084c60b/attachment.sig> ^ permalink raw reply related [flat|nested] 8+ messages in thread
* OMAP still fails - usb phy stuff 2013-12-10 20:16 ` Felipe Balbi @ 2013-12-10 20:20 ` Felipe Balbi 2013-12-10 20:21 ` Russell King - ARM Linux 0 siblings, 1 reply; 8+ messages in thread From: Felipe Balbi @ 2013-12-10 20:20 UTC (permalink / raw) To: linux-arm-kernel On Tue, Dec 10, 2013 at 02:16:40PM -0600, Felipe Balbi wrote: > Hi, > > On Tue, Dec 10, 2013 at 01:25:08PM -0600, Felipe Balbi wrote: > > On Tue, Dec 10, 2013 at 10:38:10AM -0800, Tony Lindgren wrote: > > > * Russell King - ARM Linux <linux@arm.linux.org.uk> [131210 05:10]: > > > > I still see some OMAP randconfigs failing with this: > > > > > > > > arch/arm/mach-omap2/built-in.o: In function `usbhs_init_phys': > > > > dss-common.c:(.text+0x1396c): undefined reference to `usb_bind_phy' > > > > arch/arm/mach-omap2/built-in.o: In function `omap_2430sdp_init': > > > > dss-common.c:(.init.text+0x6c90): undefined reference to `usb_bind_phy' > > > > drivers/built-in.o: In function `omap_usb2_remove': > > > > powercap_sys.c:(.text+0x3520): undefined reference to `usb_remove_phy' > > > > drivers/built-in.o: In function `omap_usb_power_off': > > > > powercap_sys.c:(.text+0x3544): undefined reference to `omap_control_usb_phy_power' > > > > drivers/built-in.o: In function `omap_usb_power_on': > > > > powercap_sys.c:(.text+0x3568): undefined reference to `omap_control_usb_phy_power' > > > > drivers/built-in.o: In function `omap_usb2_probe': > > > > powercap_sys.c:(.text+0x3638): undefined reference to `omap_control_usb_phy_power' > > > > powercap_sys.c:(.text+0x36d4): undefined reference to `usb_add_phy_dev' > > > > drivers/built-in.o: In function `omap_usb2_suspend': > > > > powercap_sys.c:(.text+0x37d0): undefined reference to `omap_control_usb_phy_power' > > > > powercap_sys.c:(.text+0x37f4): undefined reference to `omap_control_usb_phy_power' > > > > drivers/built-in.o: In function `omap_usb2_set_comparator': > > > > powercap_sys.c:(.text+0x3844): undefined reference to `usb_get_phy' > > > > drivers/built-in.o: In function `isp1704_charger_remove': > > > > powercap_sys.c:(.text+0x48d5ec): undefined reference to `usb_put_phy' > > > > drivers/built-in.o: In function `isp1704_charger_probe': > > > > powercap_sys.c:(.text+0x48d64c): undefined reference to `usb_get_phy' > > > > powercap_sys.c:(.text+0x48d884): undefined reference to `usb_put_phy' > > > > drivers/built-in.o: In function `twl4030_bci_probe': > > > > powercap_sys.c:(.init.text+0x13fd4): undefined reference to `usb_get_phy' > > > > powercap_sys.c:(.init.text+0x14114): undefined reference to `usb_put_phy' > > > > > > > > Probably caused by over-use of the damned select statement: > > > > > > > > warning: (OMAP_USB2 && TWL4030_USB) selects USB_PHY which has unmet direct dependencies (USB_SUPPORT) > > > > warning: (OMAP_USB2) selects OMAP_CONTROL_USB which has unmet direct dependencies (USB_SUPPORT && (ARCH_OMAP2PLUS || COMPILE_TEST)) > > > > warning: (OMAP_USB2 && TWL4030_USB) selects USB_PHY which has unmet direct dependencies (USB_SUPPORT) > > > > warning: (OMAP_USB2) selects OMAP_CONTROL_USB which has unmet direct dependencies (USB_SUPPORT && (ARCH_OMAP2PLUS || COMPILE_TEST)) > > > > > > > > You have to wonder why OMAP_USB2 can be enabled when USB_SUPPORT is > > > > disabled. > > > > > > Yeah this causes constant randconfig errors. Felipe, I thought you > > > had some fixes lined up for these few weeks ago already when we > > > last talked about it? > > > > For the warnings, yeah. Greg's pull request hasn't been appliet yet > > (need to check again, checked yesterday). > > > > For the build error, I'll send something today. > > this should fix it (checked with RMK's defconfig): > > diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig > index a344f3d..d8b1a9a 100644 > --- a/drivers/phy/Kconfig > +++ b/drivers/phy/Kconfig > @@ -24,9 +24,9 @@ config PHY_EXYNOS_MIPI_VIDEO > config OMAP_USB2 > tristate "OMAP USB2 PHY Driver" > depends on ARCH_OMAP2PLUS > + depends on OMAP_CONTROL_USB > select GENERIC_PHY > select USB_PHY > - select OMAP_CONTROL_USB > help > Enable this to support the transceiver that is part of SOC. This > driver takes care of all the PHY functionality apart from comparator. > > i'll send it as a proper patch now. Russell, should I add your Reported-by ? If so, which email do you prefer to be used ? -- balbi -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20131210/b511c6bf/attachment.sig> ^ permalink raw reply [flat|nested] 8+ messages in thread
* OMAP still fails - usb phy stuff 2013-12-10 20:20 ` Felipe Balbi @ 2013-12-10 20:21 ` Russell King - ARM Linux 2013-12-10 20:25 ` Felipe Balbi 0 siblings, 1 reply; 8+ messages in thread From: Russell King - ARM Linux @ 2013-12-10 20:21 UTC (permalink / raw) To: linux-arm-kernel On Tue, Dec 10, 2013 at 02:20:14PM -0600, Felipe Balbi wrote: > On Tue, Dec 10, 2013 at 02:16:40PM -0600, Felipe Balbi wrote: > > diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig > > index a344f3d..d8b1a9a 100644 > > --- a/drivers/phy/Kconfig > > +++ b/drivers/phy/Kconfig > > @@ -24,9 +24,9 @@ config PHY_EXYNOS_MIPI_VIDEO > > config OMAP_USB2 > > tristate "OMAP USB2 PHY Driver" > > depends on ARCH_OMAP2PLUS > > + depends on OMAP_CONTROL_USB > > select GENERIC_PHY > > select USB_PHY > > - select OMAP_CONTROL_USB > > help > > Enable this to support the transceiver that is part of SOC. This > > driver takes care of all the PHY functionality apart from comparator. > > > > i'll send it as a proper patch now. > > Russell, should I add your Reported-by ? If so, which email do you > prefer to be used ? I always prefer rmk+kernel at arm.linux.org.uk in git commits. Thanks for asking. ^ permalink raw reply [flat|nested] 8+ messages in thread
* OMAP still fails - usb phy stuff 2013-12-10 20:21 ` Russell King - ARM Linux @ 2013-12-10 20:25 ` Felipe Balbi 0 siblings, 0 replies; 8+ messages in thread From: Felipe Balbi @ 2013-12-10 20:25 UTC (permalink / raw) To: linux-arm-kernel On Tue, Dec 10, 2013 at 08:21:44PM +0000, Russell King - ARM Linux wrote: > On Tue, Dec 10, 2013 at 02:20:14PM -0600, Felipe Balbi wrote: > > On Tue, Dec 10, 2013 at 02:16:40PM -0600, Felipe Balbi wrote: > > > diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig > > > index a344f3d..d8b1a9a 100644 > > > --- a/drivers/phy/Kconfig > > > +++ b/drivers/phy/Kconfig > > > @@ -24,9 +24,9 @@ config PHY_EXYNOS_MIPI_VIDEO > > > config OMAP_USB2 > > > tristate "OMAP USB2 PHY Driver" > > > depends on ARCH_OMAP2PLUS > > > + depends on OMAP_CONTROL_USB > > > select GENERIC_PHY > > > select USB_PHY > > > - select OMAP_CONTROL_USB > > > help > > > Enable this to support the transceiver that is part of SOC. This > > > driver takes care of all the PHY functionality apart from comparator. > > > > > > i'll send it as a proper patch now. > > > > Russell, should I add your Reported-by ? If so, which email do you > > prefer to be used ? > > I always prefer rmk+kernel at arm.linux.org.uk in git commits. Thanks > for asking. no problem, patch sent. -- balbi -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20131210/c45367f9/attachment.sig> ^ permalink raw reply [flat|nested] 8+ messages in thread
* OMAP still fails - usb phy stuff 2013-12-10 18:38 ` Tony Lindgren 2013-12-10 19:25 ` Felipe Balbi @ 2013-12-10 19:26 ` Greg KH 1 sibling, 0 replies; 8+ messages in thread From: Greg KH @ 2013-12-10 19:26 UTC (permalink / raw) To: linux-arm-kernel On Tue, Dec 10, 2013 at 10:38:10AM -0800, Tony Lindgren wrote: > * Russell King - ARM Linux <linux@arm.linux.org.uk> [131210 05:10]: > > I still see some OMAP randconfigs failing with this: > > > > arch/arm/mach-omap2/built-in.o: In function `usbhs_init_phys': > > dss-common.c:(.text+0x1396c): undefined reference to `usb_bind_phy' > > arch/arm/mach-omap2/built-in.o: In function `omap_2430sdp_init': > > dss-common.c:(.init.text+0x6c90): undefined reference to `usb_bind_phy' > > drivers/built-in.o: In function `omap_usb2_remove': > > powercap_sys.c:(.text+0x3520): undefined reference to `usb_remove_phy' > > drivers/built-in.o: In function `omap_usb_power_off': > > powercap_sys.c:(.text+0x3544): undefined reference to `omap_control_usb_phy_power' > > drivers/built-in.o: In function `omap_usb_power_on': > > powercap_sys.c:(.text+0x3568): undefined reference to `omap_control_usb_phy_power' > > drivers/built-in.o: In function `omap_usb2_probe': > > powercap_sys.c:(.text+0x3638): undefined reference to `omap_control_usb_phy_power' > > powercap_sys.c:(.text+0x36d4): undefined reference to `usb_add_phy_dev' > > drivers/built-in.o: In function `omap_usb2_suspend': > > powercap_sys.c:(.text+0x37d0): undefined reference to `omap_control_usb_phy_power' > > powercap_sys.c:(.text+0x37f4): undefined reference to `omap_control_usb_phy_power' > > drivers/built-in.o: In function `omap_usb2_set_comparator': > > powercap_sys.c:(.text+0x3844): undefined reference to `usb_get_phy' > > drivers/built-in.o: In function `isp1704_charger_remove': > > powercap_sys.c:(.text+0x48d5ec): undefined reference to `usb_put_phy' > > drivers/built-in.o: In function `isp1704_charger_probe': > > powercap_sys.c:(.text+0x48d64c): undefined reference to `usb_get_phy' > > powercap_sys.c:(.text+0x48d884): undefined reference to `usb_put_phy' > > drivers/built-in.o: In function `twl4030_bci_probe': > > powercap_sys.c:(.init.text+0x13fd4): undefined reference to `usb_get_phy' > > powercap_sys.c:(.init.text+0x14114): undefined reference to `usb_put_phy' > > > > Probably caused by over-use of the damned select statement: > > > > warning: (OMAP_USB2 && TWL4030_USB) selects USB_PHY which has unmet direct dependencies (USB_SUPPORT) > > warning: (OMAP_USB2) selects OMAP_CONTROL_USB which has unmet direct dependencies (USB_SUPPORT && (ARCH_OMAP2PLUS || COMPILE_TEST)) > > warning: (OMAP_USB2 && TWL4030_USB) selects USB_PHY which has unmet direct dependencies (USB_SUPPORT) > > warning: (OMAP_USB2) selects OMAP_CONTROL_USB which has unmet direct dependencies (USB_SUPPORT && (ARCH_OMAP2PLUS || COMPILE_TEST)) > > > > You have to wonder why OMAP_USB2 can be enabled when USB_SUPPORT is > > disabled. > > Yeah this causes constant randconfig errors. Felipe, I thought you > had some fixes lined up for these few weeks ago already when we > last talked about it? We are still discussing how best to fix this on the linux-usb mailing list, give us a chance... thanks, greg k-h ^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2013-12-10 20:25 UTC | newest] Thread overview: 8+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2013-12-10 13:09 OMAP still fails - usb phy stuff Russell King - ARM Linux 2013-12-10 18:38 ` Tony Lindgren 2013-12-10 19:25 ` Felipe Balbi 2013-12-10 20:16 ` Felipe Balbi 2013-12-10 20:20 ` Felipe Balbi 2013-12-10 20:21 ` Russell King - ARM Linux 2013-12-10 20:25 ` Felipe Balbi 2013-12-10 19:26 ` Greg KH
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).