linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: sboyd@codeaurora.org (Stephen Boyd)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 3/8] regmap: Add support for using regmap over ssbi
Date: Fri, 13 Dec 2013 13:37:07 -0800	[thread overview]
Message-ID: <20131213213707.GO21983@codeaurora.org> (raw)
In-Reply-To: <20131213104128.GT11044@sirena.org.uk>

On 12/13, Mark Brown wrote:
> On Thu, Dec 12, 2013 at 03:13:01PM -0800, Stephen Boyd wrote:
> 
> > > bulk_read() should decay to individual reads if there isn't a block
> > > operaton and it's not like the hardware actually supports bulk reads
> > > anyway.
> 
> > So regmap_bulk_read() should work if I don't have a map->bus? To make it
> > work with reg_read/write I had to do this. I'm not sure how to make
> > bulk_write work.

I came up with this (possibly ugly) patch. It works for my
specific case but I'm not sure if unpacking the val bits into an
unsigned int and passing that to _regmap_write() is sane. What do
you think?

---8<----
diff --git a/drivers/base/regmap/regmap.c b/drivers/base/regmap/regmap.c
index 1ccd61b..333c059 100644
--- a/drivers/base/regmap/regmap.c
+++ b/drivers/base/regmap/regmap.c
@@ -1514,11 +1514,9 @@ int regmap_bulk_write(struct regmap *map, unsigned int reg, const void *val,
 {
 	int ret = 0, i;
 	size_t val_bytes = map->format.val_bytes;
-	void *wval;
+	void *wval = NULL;
 
-	if (!map->bus)
-		return -EINVAL;
-	if (!map->format.parse_inplace)
+	if (map->bus && !map->format.parse_inplace)
 		return -EINVAL;
 	if (reg % map->reg_stride)
 		return -EINVAL;
@@ -1528,7 +1526,7 @@ int regmap_bulk_write(struct regmap *map, unsigned int reg, const void *val,
 	/* No formatting is require if val_byte is 1 */
 	if (val_bytes == 1) {
 		wval = (void *)val;
-	} else {
+	} else if (map->bus) {
 		wval = kmemdup(val, val_count * val_bytes, GFP_KERNEL);
 		if (!wval) {
 			ret = -ENOMEM;
@@ -1538,24 +1536,37 @@ int regmap_bulk_write(struct regmap *map, unsigned int reg, const void *val,
 		for (i = 0; i < val_count * val_bytes; i += val_bytes)
 			map->format.parse_inplace(wval + i);
 	}
-	/*
-	 * Some devices does not support bulk write, for
-	 * them we have a series of single write operations.
-	 */
-	if (map->use_single_rw) {
-		for (i = 0; i < val_count; i++) {
-			ret = _regmap_raw_write(map,
+
+	if (map->bus) {
+		/*
+		 * Some devices does not support bulk write, for
+		 * them we have a series of single write operations.
+		 */
+		if (map->use_single_rw) {
+			for (i = 0; i < val_count; i++) {
+				ret = _regmap_raw_write(map,
 						reg + (i * map->reg_stride),
 						val + (i * val_bytes),
 						val_bytes);
-			if (ret != 0)
-				return ret;
+				if (ret != 0)
+					return ret;
+			}
+		} else {
+			ret = _regmap_raw_write(map, reg, wval,
+						val_bytes * val_count);
 		}
 	} else {
-		ret = _regmap_raw_write(map, reg, wval, val_bytes * val_count);
+		for (i = 0; i < val_count; i++) {
+			unsigned int ival;
+			ival = *(unsigned int *)(val + (i * val_bytes));
+			ret = _regmap_write(map, reg + (i * map->reg_stride),
+					ival);
+			if (ret != 0)
+				goto out;
+		}
 	}
 
-	if (val_bytes != 1)
+	if (val_bytes != 1 && map->bus)
 		kfree(wval);
 
 out:

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
hosted by The Linux Foundation

  parent reply	other threads:[~2013-12-13 21:37 UTC|newest]

Thread overview: 37+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-12-10 23:35 [PATCH 0/8] Modernize pm8921 with irqdomains + regmap Stephen Boyd
2013-12-10 23:35 ` [PATCH 1/8] mfd: ssbi: Remove platform data structs and hide ssbi type enum Stephen Boyd
2013-12-11  9:27   ` Lee Jones
2013-12-10 23:35 ` [PATCH 2/8] mfd: ssbi: Constify buffer in ssbi_write Stephen Boyd
2013-12-11  9:28   ` Lee Jones
2013-12-10 23:35 ` [PATCH 3/8] regmap: Add support for using regmap over ssbi Stephen Boyd
2013-12-10 23:50   ` Mark Brown
2013-12-11  0:13     ` Stephen Boyd
2013-12-11  0:51       ` Mark Brown
2013-12-11  1:32         ` Stephen Boyd
2013-12-11 13:27           ` Mark Brown
2013-12-12 23:13             ` Stephen Boyd
2013-12-13 10:41               ` Mark Brown
2013-12-13 17:14                 ` [PATCH] regmap: Allow regmap_bulk_read() to work for "no-bus" regmaps Stephen Boyd
2013-12-16 20:57                   ` Mark Brown
2013-12-13 21:37                 ` Stephen Boyd [this message]
2013-12-16 21:01                   ` [PATCH 3/8] regmap: Add support for using regmap over ssbi Mark Brown
2013-12-17  2:30                     ` [PATCH] regmap: Allow regmap_bulk_write() to work for "no-bus" regmaps Stephen Boyd
2013-12-18 18:45                       ` Mark Brown
2013-12-23 20:05                         ` Stephen Boyd
2013-12-24 12:53                           ` Mark Brown
2013-12-26 19:34                             ` Stephen Boyd
2013-12-26 21:52                               ` [PATCH v2] " Stephen Boyd
2013-12-30 12:42                                 ` Mark Brown
2013-12-10 23:35 ` [PATCH 4/8] mfd: ssbi: Mark match table const Stephen Boyd
2013-12-11  9:29   ` Lee Jones
2013-12-10 23:35 ` [PATCH 5/8] mfd: Move pm8xxx-irq.c contents into only driver that uses it Stephen Boyd
2013-12-11  9:35   ` Lee Jones
2013-12-12 19:06     ` Stephen Boyd
2013-12-10 23:35 ` [PATCH 6/8] mfd: pm8921: Update for genirq changes Stephen Boyd
2013-12-11  9:48   ` Lee Jones
2013-12-10 23:35 ` [PATCH 7/8] mfd: pm8921: Migrate to irqdomains Stephen Boyd
2013-12-11  9:53   ` Lee Jones
2013-12-11 21:30   ` Courtney Cavin
2013-12-12 19:05     ` Stephen Boyd
2013-12-10 23:35 ` [PATCH 8/8] mfd: pm8921: Use ssbi regmap Stephen Boyd
2013-12-11  9:55   ` Lee Jones

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20131213213707.GO21983@codeaurora.org \
    --to=sboyd@codeaurora.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).