linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: marex@denx.de (Marek Vasut)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH V1 01/11] ARM: dts: imx: sabrelite: add Dual Lite/Solo support
Date: Fri, 13 Dec 2013 22:51:41 +0100	[thread overview]
Message-ID: <201312132251.41342.marex@denx.de> (raw)
In-Reply-To: <52AB5729.9010603@boundarydevices.com>

On Friday, December 13, 2013 at 07:51:21 PM, Troy Kisky wrote:
> On 12/13/2013 4:46 AM, Marek Vasut wrote:
> > On Friday, December 13, 2013 at 02:49:05 AM, Troy Kisky wrote:
> >> This makes the structure of Sabre Lite board files the same
> >> as Sabre SD board files so that they are easier to compare.
> >> 
> >> By this, I mean that the majority of the file imx6q-sabrelite.dts
> >> is moved to imx6qdl-sabrelite.dtsi so that both imx6q-sabrelite.dts
> >> and imx6dl-sabrelite.dts can include it.
> >> 
> >> Now Sabre Lite has support for Dual Lite/Solo
> >> processors.
> >> 
> >> Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
> >> ---
> >> 
> >>   arch/arm/boot/dts/Makefile                         |   1 +
> >>   arch/arm/boot/dts/imx6dl-sabrelite.dts             |  20 ++
> >>   arch/arm/boot/dts/imx6q-sabrelite.dts              | 214
> >> 
> >> +-------------------- ...{imx6q-sabrelite.dts => imx6qdl-sabrelite.dtsi}
> >> |
> >> 
> >>   10 -
> >>   4 files changed, 22 insertions(+), 223 deletions(-)
> >>   create mode 100644 arch/arm/boot/dts/imx6dl-sabrelite.dts
> >>   copy arch/arm/boot/dts/{imx6q-sabrelite.dts => imx6qdl-sabrelite.dtsi}
> >> 
> >> (96%)
> >> 
> >> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> >> index 342d16d..3c6f456 100644
> >> --- a/arch/arm/boot/dts/Makefile
> >> +++ b/arch/arm/boot/dts/Makefile
> >> @@ -149,6 +149,7 @@ dtb-$(CONFIG_ARCH_MXC) += \
> >> 
> >>   	imx6dl-gw53xx.dtb \
> >>   	imx6dl-gw54xx.dtb \
> >>   	imx6dl-sabreauto.dtb \
> >> 
> >> +	imx6dl-sabrelite.dtb \
> >> 
> >>   	imx6dl-sabresd.dtb \
> >>   	imx6dl-wandboard.dtb \
> >>   	imx6q-arm2.dtb \
> >> 
> >> diff --git a/arch/arm/boot/dts/imx6dl-sabrelite.dts
> >> b/arch/arm/boot/dts/imx6dl-sabrelite.dts new file mode 100644
> >> index 0000000..2de0447
> >> --- /dev/null
> >> +++ b/arch/arm/boot/dts/imx6dl-sabrelite.dts
> >> @@ -0,0 +1,20 @@
> >> +/*
> >> + * Copyright 2011 Freescale Semiconductor, Inc.
> >> + * Copyright 2011 Linaro Ltd.
> > 
> > Are you sure about this copyright message ? Isn't this copyright BD ?
> > 
> > Otherwise,
> > 
> > Reviewed-by: Marek Vasut <marex@denx.de>
> > 
> > Best regards,
> > Marek Vasut
> 
> Maybe, but the following change doesn't seem worthy of a copyright
> 
> linux-imx6/arch/arm/boot/dts$ diff -u imx6q-sabrelite.dts
> imx6dl-sabrelite.dts
> --- imx6q-sabrelite.dts 2013-12-12 11:22:10.156010652 -0700
> +++ imx6dl-sabrelite.dts        2013-12-12 11:22:10.156010652 -0700
> @@ -11,14 +11,10 @@
>    */
> 
>   /dts-v1/;
> -#include "imx6q.dtsi"
> +#include "imx6dl.dtsi"
>   #include "imx6qdl-sabrelite.dtsi"
> 
>   / {
> -       model = "Freescale i.MX6 Quad SABRE Lite Board";
> -       compatible = "fsl,imx6q-sabrelite", "fsl,imx6q";
> -};
> -
> -&sata {
> -       status = "okay";
> +       model = "Freescale i.MX6 DualLite SABRE Lite Board";
> +       compatible = "fsl,imx6dl-sabrelite", "fsl,imx6dl";
>   };
> _______
> 
> Perhaps I should add a copyright to both?

I'm no lawyer, I cannot give you an authoritative advice in this, sorry.

  reply	other threads:[~2013-12-13 21:51 UTC|newest]

Thread overview: 41+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-12-13  1:49 [PATCH V1 00/11] Update Sabre Lite Troy Kisky
2013-12-13  1:49 ` [PATCH V1 01/11] ARM: dts: imx: sabrelite: add Dual Lite/Solo support Troy Kisky
2013-12-13 11:46   ` Marek Vasut
2013-12-13 18:51     ` Troy Kisky
2013-12-13 21:51       ` Marek Vasut [this message]
2013-12-13  1:49 ` [PATCH V1 02/11] ARM: dts: imx6qdl-sabrelite: Add uart1 support Troy Kisky
2013-12-13 11:46   ` Marek Vasut
2013-12-13  1:49 ` [PATCH V1 03/11] ARM: dts: imx6qdl-sabrelite: remove usdhc4 wp-gpio Troy Kisky
2013-12-13 11:46   ` Marek Vasut
2013-12-14 13:46   ` Shawn Guo
2013-12-16 19:42     ` Troy Kisky
2013-12-16 19:54       ` Marek Vasut
2013-12-16 23:59         ` Troy Kisky
2013-12-13  1:49 ` [PATCH V1 04/11] ARM: dts: imx6qdl-sabrelite: add comments for pinctrl_hog Troy Kisky
2013-12-13 11:47   ` Marek Vasut
2013-12-14 13:54   ` Shawn Guo
2013-12-13  1:49 ` [PATCH V1 05/11] ARM: dts: imx6qdl-sabrelite: specify pad settings Troy Kisky
2013-12-13 11:48   ` Marek Vasut
2013-12-13 18:42     ` Troy Kisky
2013-12-13 21:50       ` Marek Vasut
2013-12-14  1:44         ` Troy Kisky
2013-12-14  5:00           ` Marek Vasut
2013-12-14 13:29         ` Shawn Guo
2013-12-14 14:16           ` Marek Vasut
2013-12-13  1:49 ` [PATCH V1 06/11] ARM: dts: imx6qdl-sabrelite: add gpio-keys Troy Kisky
2013-12-13 11:51   ` Marek Vasut
2013-12-13 18:45     ` Troy Kisky
2013-12-13 21:50       ` Marek Vasut
2013-12-13 21:55         ` Eric Nelson
2013-12-14  5:00           ` Marek Vasut
2013-12-14 13:57   ` Shawn Guo
2013-12-13  1:49 ` [PATCH V1 07/11] ARM: dts: imx6qdl-sabrelite: add pwms for backlights Troy Kisky
2013-12-13 11:53   ` Marek Vasut
2013-12-13 14:09     ` Eric Nelson
2013-12-13  1:49 ` [PATCH V1 08/11] ARM: dts: imx6qdl-sabrelite: add skews for Micrel phy Troy Kisky
2013-12-13 11:53   ` Marek Vasut
2013-12-13  1:49 ` [PATCH V1 09/11] ARM: dts: imx6qdl-sabrelite: fix ENET group Troy Kisky
2013-12-13 11:54   ` Marek Vasut
2013-12-13  1:49 ` [PATCH V1 10/11] ARM: dts: imx6qdl-sabrelite: Add over-current pin to usbotg Troy Kisky
2013-12-13 11:54   ` Marek Vasut
2013-12-13  1:49 ` [PATCH V1 11/11] ARM: dts: imx: add nitrogen6x board Troy Kisky

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=201312132251.41342.marex@denx.de \
    --to=marex@denx.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).