linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: christoffer.dall@linaro.org (Christoffer Dall)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 02/10] KVM: arm-vgic: Support KVM_CREATE_DEVICE for VGIC
Date: Mon, 16 Dec 2013 09:08:56 -0800	[thread overview]
Message-ID: <20131216170856.GB12833@cbox> (raw)
In-Reply-To: <52AEE7D1.6020106@arm.com>

On Mon, Dec 16, 2013 at 11:45:21AM +0000, Marc Zyngier wrote:
> On 12/12/13 19:55, Christoffer Dall wrote:
> > Support creating the ARM VGIC device through the KVM_CREATE_DEVICE
> > ioctl, which can then later be leveraged to use the
> > KVM_{GET/SET}_DEVICE_ATTR, which is useful both for setting addresses in
> > a more generic API than the ARM-specific one and is useful for
> > save/restore of VGIC state.
> > 
> > Adds KVM_CAP_DEVICE_CTRL to ARM capabilities.
> > 
> > Note that we change the check for creating a VGIC from bailing out if
> > any VCPUs were created, to bailing out if any VCPUs were ever run.  This
> > is an important distinction that shouldn't break anything, but allows
> > creating the VGIC after the VCPUs have been created.
> > 
> > Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
> > ---
> > Changelog[v4]:
> >  - Rename kvm_arm_vgic_ops to kvm_arm_vgic_v2_ops
> >  - Add comment to kvm_vgic_create about locking vcpu->mutex
> > 
> > Changelog[v3]:
> >  - Prevent race in kvm_vgic_create by trying to take all the vcpu
> >    locks before creating the vgic.
> > 
> > Changelog[v2]:
> >  - None
> > 
> >  Documentation/virtual/kvm/devices/arm-vgic.txt | 10 ++++
> >  arch/arm/kvm/arm.c                             |  1 +
> >  include/linux/kvm_host.h                       |  1 +
> >  include/uapi/linux/kvm.h                       |  1 +
> >  virt/kvm/arm/vgic.c                            | 63 +++++++++++++++++++++++++-
> >  virt/kvm/kvm_main.c                            |  6 ++-
> >  6 files changed, 79 insertions(+), 3 deletions(-)
> >  create mode 100644 Documentation/virtual/kvm/devices/arm-vgic.txt
> > 
> > diff --git a/Documentation/virtual/kvm/devices/arm-vgic.txt b/Documentation/virtual/kvm/devices/arm-vgic.txt
> > new file mode 100644
> > index 0000000..38f27f7
> > --- /dev/null
> > +++ b/Documentation/virtual/kvm/devices/arm-vgic.txt
> > @@ -0,0 +1,10 @@
> > +ARM Virtual Generic Interrupt Controller (VGIC)
> > +===============================================
> > +
> > +Device types supported:
> > +  KVM_DEV_TYPE_ARM_VGIC_V2     ARM Generic Interrupt Controller v2.0
> > +
> > +Only one VGIC instance may be instantiated through either this API or the
> > +legacy KVM_CREATE_IRQCHIP api.  The created VGIC will act as the VM interrupt
> > +controller, requiring emulated user-space devices to inject interrupts to the
> > +VGIC instead of directly to CPUs.
> > diff --git a/arch/arm/kvm/arm.c b/arch/arm/kvm/arm.c
> > index c9fe9d7..cc7c41a 100644
> > --- a/arch/arm/kvm/arm.c
> > +++ b/arch/arm/kvm/arm.c
> > @@ -190,6 +190,7 @@ int kvm_dev_ioctl_check_extension(long ext)
> >  	case KVM_CAP_IRQCHIP:
> >  		r = vgic_present;
> >  		break;
> > +	case KVM_CAP_DEVICE_CTRL:
> >  	case KVM_CAP_USER_MEMORY:
> >  	case KVM_CAP_SYNC_MMU:
> >  	case KVM_CAP_DESTROY_MEMORY_REGION_WORKS:
> > diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h
> > index 9523d2a..521dd76 100644
> > --- a/include/linux/kvm_host.h
> > +++ b/include/linux/kvm_host.h
> > @@ -1076,6 +1076,7 @@ struct kvm_device *kvm_device_from_filp(struct file *filp);
> >  extern struct kvm_device_ops kvm_mpic_ops;
> >  extern struct kvm_device_ops kvm_xics_ops;
> >  extern struct kvm_device_ops kvm_vfio_ops;
> > +extern struct kvm_device_ops kvm_arm_vgic_v2_ops;
> >  
> >  #ifdef CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT
> >  
> > diff --git a/include/uapi/linux/kvm.h b/include/uapi/linux/kvm.h
> > index 902f124..b647c29 100644
> > --- a/include/uapi/linux/kvm.h
> > +++ b/include/uapi/linux/kvm.h
> > @@ -853,6 +853,7 @@ struct kvm_device_attr {
> >  #define  KVM_DEV_VFIO_GROUP			1
> >  #define   KVM_DEV_VFIO_GROUP_ADD			1
> >  #define   KVM_DEV_VFIO_GROUP_DEL			2
> > +#define KVM_DEV_TYPE_ARM_VGIC_V2	5
> >  
> >  /*
> >   * ioctls for VM fds
> > diff --git a/virt/kvm/arm/vgic.c b/virt/kvm/arm/vgic.c
> > index 5e9df47..b15d6c1 100644
> > --- a/virt/kvm/arm/vgic.c
> > +++ b/virt/kvm/arm/vgic.c
> > @@ -1433,20 +1433,45 @@ out:
> >  
> >  int kvm_vgic_create(struct kvm *kvm)
> >  {
> > -	int ret = 0;
> > +	int i, vcpu_lock_idx = -1, ret = 0;
> > +	struct kvm_vcpu *vcpu;
> >  
> >  	mutex_lock(&kvm->lock);
> >  
> > -	if (atomic_read(&kvm->online_vcpus) || kvm->arch.vgic.vctrl_base) {
> > +	if (kvm->arch.vgic.vctrl_base) {
> >  		ret = -EEXIST;
> >  		goto out;
> >  	}
> >  
> > +	/*
> > +	 * Any time a vcpu is run, vcpu_load is called which tries to grab the
> > +	 * vcpu->mutex.  By grabbing the vcpu->mutex of all VCPUs we ensure
> > +	 * that no other VCPUs are run while we create the vgic.
> > +	 */
> > +	kvm_for_each_vcpu(i, vcpu, kvm) {
> > +		if (!mutex_trylock(&vcpu->mutex))
> > +			goto out_unlock;
> > +		vcpu_lock_idx = i;
> > +	}
> > +
> > +	kvm_for_each_vcpu(i, vcpu, kvm) {
> > +		if (vcpu->arch.has_run_once) {
> > +			ret = -EBUSY;
> > +			goto out_unlock;
> > +		}
> > +	}
> > +
> >  	spin_lock_init(&kvm->arch.vgic.lock);
> >  	kvm->arch.vgic.vctrl_base = vgic_vctrl_base;
> >  	kvm->arch.vgic.vgic_dist_base = VGIC_ADDR_UNDEF;
> >  	kvm->arch.vgic.vgic_cpu_base = VGIC_ADDR_UNDEF;
> >  
> > +out_unlock:
> > +	for (; vcpu_lock_idx >= 0; vcpu_lock_idx--) {
> > +		vcpu = kvm_get_vcpu(kvm, vcpu_lock_idx);
> > +		mutex_unlock(&vcpu->mutex);
> > +	}
> > +
> >  out:
> >  	mutex_unlock(&kvm->lock);
> >  	return ret;
> > @@ -1510,3 +1535,37 @@ int kvm_vgic_set_addr(struct kvm *kvm, unsigned long type, u64 addr)
> >  	mutex_unlock(&kvm->lock);
> >  	return r;
> >  }
> > +
> > +static int vgic_set_attr(struct kvm_device *dev, struct kvm_device_attr *attr)
> > +{
> > +	return -ENXIO;
> > +}
> > +
> > +static int vgic_get_attr(struct kvm_device *dev, struct kvm_device_attr *attr)
> > +{
> > +	return -ENXIO;
> > +}
> > +
> > +static int vgic_has_attr(struct kvm_device *dev, struct kvm_device_attr *attr)
> > +{
> > +	return -ENXIO;
> > +}
> > +
> > +static void vgic_destroy(struct kvm_device *dev)
> > +{
> > +	kfree(dev);
> > +}
> > +
> > +static int vgic_create(struct kvm_device *dev, u32 type)
> > +{
> > +	return kvm_vgic_create(dev->kvm);
> > +}
> > +
> > +struct kvm_device_ops kvm_arm_vgic_v2_ops = {
> > +	.name = "kvm-arm-vgic",
> > +	.create = vgic_create,
> > +	.destroy = vgic_destroy,
> > +	.set_attr = vgic_set_attr,
> > +	.get_attr = vgic_get_attr,
> > +	.has_attr = vgic_has_attr,
> > +};
> > diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c
> > index a0aa84b..954a0ba 100644
> > --- a/virt/kvm/kvm_main.c
> > +++ b/virt/kvm/kvm_main.c
> > @@ -2279,7 +2279,11 @@ static int kvm_ioctl_create_device(struct kvm *kvm,
> >  #ifdef CONFIG_KVM_VFIO
> >  	case KVM_DEV_TYPE_VFIO:
> >  		ops = &kvm_vfio_ops;
> > -		break;
> 
> I think you just broke VFIO.
> 

Yeah, I'm tired of thinking about VFIO for platform devices so I just
deided to get rid of that stuff ;)

> > +#endif
> > +#ifdef CONFIG_KVM_ARM_VGIC
> > +	case KVM_DEV_TYPE_ARM_VGIC_V2:
> > +		ops = &kvm_arm_vgic_v2_ops;
> > +	break;
> 
> Indentation?
> 

I have no idea what was in that coffee...

> >  #endif
> >  	default:
> >  		return -ENODEV;
> > 
> 
> Provided that you fix the above:
> Acked-by: Marc Zyngier <marc.zyngier@arm.com>
> 


Thanks,
-- 
Christoffer

  reply	other threads:[~2013-12-16 17:08 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-12-12 19:55 [PATCH 00/10] Support VGIC save/restore using device control API Christoffer Dall
2013-12-12 19:55 ` [PATCH 01/10] ARM: KVM: Allow creating the VGIC after VCPUs Christoffer Dall
2013-12-12 19:55 ` [PATCH 02/10] KVM: arm-vgic: Support KVM_CREATE_DEVICE for VGIC Christoffer Dall
2013-12-16 11:45   ` Marc Zyngier
2013-12-16 17:08     ` Christoffer Dall [this message]
2013-12-12 19:55 ` [PATCH 03/10] KVM: arm-vgic: Set base addr through device API Christoffer Dall
2013-12-16 11:46   ` Marc Zyngier
2013-12-12 19:55 ` [PATCH 04/10] irqchip: arm-gic: Define additional MMIO offsets and masks Christoffer Dall
2013-12-12 19:55 ` [PATCH 05/10] KVM: arm-vgic: Make vgic mmio functions more generic Christoffer Dall
2013-12-12 19:55 ` [PATCH 06/10] arm/arm64: kvm: Set vcpu->cpu to -1 on vcpu_put Christoffer Dall
2013-12-16 11:49   ` Marc Zyngier
2013-12-12 19:55 ` [PATCH 07/10] KVM: arm-vgic: Add vgic reg access from dev attr Christoffer Dall
2013-12-16 11:51   ` Marc Zyngier
2013-12-12 19:55 ` [PATCH 08/10] KVM: arm-vgic: Support unqueueing of LRs to the dist Christoffer Dall
2013-12-16 12:53   ` Marc Zyngier
2013-12-16 17:07     ` Christoffer Dall
2013-12-12 19:55 ` [PATCH 09/10] KVM: arm-vgic: Add GICD_SPENDSGIR and GICD_CPENDSGIR handlers Christoffer Dall
2013-12-12 19:55 ` [PATCH 10/10] KVM: arm-vgic: Support CPU interface reg access Christoffer Dall
2013-12-13 17:21 ` [PATCH 00/10] Support VGIC save/restore using device control API Christoffer Dall
2013-12-16 12:56 ` Marc Zyngier

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20131216170856.GB12833@cbox \
    --to=christoffer.dall@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).