From mboxrd@z Thu Jan 1 00:00:00 1970 From: giometti@enneenne.com (Rodolfo Giometti) Date: Mon, 30 Dec 2013 18:47:39 +0100 Subject: Can't boot newer kernel on Armada 370 dev board Message-ID: <20131230174738.GA4172@enneenne.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Hello, I have an Armada 370 dev board (DB-88F6710-BP) running Marvell kernel 3.2. Now I'm a bit puzzled because I'd like to use newer kernel (i.e 3.12) on my board, so I tried several repositories (vanilla and linux-mvebu) with no success! :'( I read on the net that it should work, but after using the bootz command everything hangs: Marvell>> tftp $loadaddr zImage-cyone Using egiga0 device TFTP from server 192.168.32.38; our IP address is 192.168.32.25 Filename 'zImage-cyone'. Load address: 0x2000000 Loading: ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ######## done Bytes transferred = 2701021 (2936dd hex) Marvell>> bootz $loadaddr Starting kernel ... File zImage-cyone is made with command: giometti at hulk:~/Projects/linux-mvebu[mvebu-dt-3.14]$ cat arch/arm/boot/zImage arch/arm/boot/dts/armada-370-db.dtb > /srv/tftp/zImage-cyone Someone have some advise for me! :) Thanks in advance, Rodolfo -- GNU/Linux Solutions e-mail: giometti at enneenne.com Linux Device Driver giometti at linux.it Embedded Systems phone: +39 349 2432127 UNIX programming skype: rodolfo.giometti Freelance ICT Italia - Consulente ICT Italia - www.consulenti-ict.it