[PATCH v2 1/2] ARM: mvebu: Add support to get the ID and the revision of a SoC

[thomas.petazzoni@free-electrons.com (Thomas Petazzoni)]

Dear Gregory CLEMENT,

On Fri,  3 Jan 2014 10:59:44 +0100, Gregory CLEMENT wrote:
> +static int __init mvebu_soc_id_init(void)
> +{
> +	struct device_node *np;
> +	int ret = 0;
> +
> +	np = of_find_matching_node(NULL, mvebu_pcie_of_match_table);
> +	if (np) {

Change this to:

	if (!np)
		return 0;

so that you avoid indenting the entire function code inside the if
{ ... } block.

> +		void __iomem *pci_base;
> +		struct clk *clk;
> +		/*
> +		 * ID and revision are available from any port, so we
> +		 * just pick the first one
> +		 */
> +		struct device_node *child = of_get_next_child(np, NULL);

Maybe check that child is not NULL here?

> +
> +		clk = of_clk_get_by_name(child, NULL);
> +		if (IS_ERR(clk)) {
> +			pr_err("%s: cannot get clock\n", __func__);

I think you should rather do:

#define pr_fmt(fmt) "mvebu-soc-id: " fmt

at the beginning of your C file and get rid of the "%s" for the
__func__.

> +		/* SoC ID */
> +		soc_dev_id = __raw_readl(pci_base + PCIE_DEV_ID_OFF) >> 16;
> +
> +		/* SoC revision */
> +		soc_rev = __raw_readl(pci_base + PCIE_DEV_REV_OFF)
> +			& SOC_REV_MASK;

Use readl() for both of these reads. __raw_readl() will not work
properly when the system is booted big-endian.

> +	return ret;
> +}
> +arch_initcall(mvebu_soc_id_init);

> +#ifdef CONFIG_ARCH_MVEBU
> +int mvebu_get_soc_id(u32 *dev, u32 *rev);
> +#else
> +int mvebu_get_soc_id(u32 *dev, u32 *rev)

Missing "static inline". Without these, if this header file is included
more than once, you will have two times the same symbol defined.

Best regards,

Thomas
-- 
Thomas Petazzoni, CTO, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com