[PATCH] ARM: sun4i: dt: Add basic board support for LinkSprite pcDuino

[PATCH] ARM: sun4i: dt: Add basic board support for LinkSprite pcDuino

[Zoltan HERPAI]

This patch will add a basic board support DT for the
LinkSprite pcDuino.

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
---
  arch/arm/boot/dts/Makefile              |    1 +
  arch/arm/boot/dts/sun4i-a10-pcduino.dts |   48 +++++++++++++++++++++++++++++++
  2 files changed, 49 insertions(+), 0 deletions(-)
  create mode 100644 arch/arm/boot/dts/sun4i-a10-pcduino.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index b663ed7..a2e3620 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -253,6 +253,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += \
  	sun4i-a10-cubieboard.dtb \
  	sun4i-a10-mini-xplus.dtb \
  	sun4i-a10-hackberry.dtb \
+	sun4i-a10-pcduino.dtb \
  	sun5i-a10s-olinuxino-micro.dtb \
  	sun5i-a13-olinuxino.dtb \
  	sun5i-a13-olinuxino-micro.dtb \
diff --git a/arch/arm/boot/dts/sun4i-a10-pcduino.dts b/arch/arm/boot/dts/sun4i-a10-pcduino.dts
new file mode 100644
index 0000000..752f002
--- /dev/null
+++ b/arch/arm/boot/dts/sun4i-a10-pcduino.dts
@@ -0,0 +1,48 @@
+/*
+ * Copyright 2014 Zoltan HERPAI
+ * Zoltan HERPAI <wigyori@uid0.hu>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "sun4i-a10.dtsi"
+
+/ {
+	model = "LinkSprite pcDuino";
+	compatible = "pcduino,a10-pcduino", "allwinner,sun4i-a10";
+
+	soc at 01c00000 {
+		emac: ethernet at 01c0b000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&emac_pins_a>;
+			phy = <&phy1>;
+			status = "okay";
+		};
+
+		mdio at 01c0b080 {
+			status = "okay";
+
+			phy1: ethernet-phy at 1 {
+				reg = <1>;
+			};
+		};
+
+		uart0: serial at 01c28000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart0_pins_a>;
+			status = "okay";
+		};
+
+		i2c0: i2c at 01c2ac00 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins_a>;
+			status = "okay";
+		};
+	};
+};
-- 
1.7.0.4

[PATCH] ARM: sun4i: dt: Add basic board support for LinkSprite pcDuino

[Maxime Ripard]

Hi Zoltan,

On Sat, Jan 11, 2014 at 04:54:52PM +0100, Zoltan HERPAI wrote:
> This patch will add a basic board support DT for the
> LinkSprite pcDuino.
> 
> Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
> ---
>  arch/arm/boot/dts/Makefile              |    1 +
>  arch/arm/boot/dts/sun4i-a10-pcduino.dts |   48 +++++++++++++++++++++++++++++++
>  2 files changed, 49 insertions(+), 0 deletions(-)
>  create mode 100644 arch/arm/boot/dts/sun4i-a10-pcduino.dts
> 
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index b663ed7..a2e3620 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -253,6 +253,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += \
>  	sun4i-a10-cubieboard.dtb \
>  	sun4i-a10-mini-xplus.dtb \
>  	sun4i-a10-hackberry.dtb \
> +	sun4i-a10-pcduino.dtb \
>  	sun5i-a10s-olinuxino-micro.dtb \
>  	sun5i-a13-olinuxino.dtb \
>  	sun5i-a13-olinuxino-micro.dtb \
> diff --git a/arch/arm/boot/dts/sun4i-a10-pcduino.dts b/arch/arm/boot/dts/sun4i-a10-pcduino.dts
> new file mode 100644
> index 0000000..752f002
> --- /dev/null
> +++ b/arch/arm/boot/dts/sun4i-a10-pcduino.dts
> @@ -0,0 +1,48 @@
> +/*
> + * Copyright 2014 Zoltan HERPAI
> + * Zoltan HERPAI <wigyori@uid0.hu>
> + *
> + * The code contained herein is licensed under the GNU General Public
> + * License. You may obtain a copy of the GNU General Public License
> + * Version 2 or later at the following locations:
> + *
> + * http://www.opensource.org/licenses/gpl-license.html
> + * http://www.gnu.org/copyleft/gpl.html
> + */
> +
> +/dts-v1/;
> +/include/ "sun4i-a10.dtsi"
> +
> +/ {
> +	model = "LinkSprite pcDuino";
> +	compatible = "pcduino,a10-pcduino", "allwinner,sun4i-a10";

Is LinkSprite the retailer or the manufacturer?

If the former, it shouldn't appear in the model string, if the latter,
it should be the prefix in the compatible.

Otherwise, it looks very good, thanks!

Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140113/f47b7cb5/attachment.sig>

[PATCH] ARM: sun4i: dt: Add basic board support for LinkSprite pcDuino

[Zoltan HERPAI]

Hi Maxime,

On Mon, 13 Jan 2014, Maxime Ripard wrote:

[...]
> Is LinkSprite the retailer or the manufacturer?
>
> If the former, it shouldn't appear in the model string, if the latter,
> it should be the prefix in the compatible.
>
> Otherwise, it looks very good, thanks!

LinkSprite is the manufacturer - I'll make a v2 soon, thanks!

Regards,
Zoltan Herpai