[PATCH RFC 00/26] Migrate more OMAP DMA code to DMA engine

[tony@atomide.com (Tony Lindgren)]

* Russell King - ARM Linux <linux@arm.linux.org.uk> [140113 08:48]:
> On Thu, Jan 09, 2014 at 03:24:37PM +0000, Russell King - ARM Linux wrote:
> > On Tue, Jan 07, 2014 at 05:21:11PM -0800, Tony Lindgren wrote:
> > > * Russell King - ARM Linux <linux@arm.linux.org.uk> [140102 07:11]:
> > > > The following patch series moves code to setup the DMA hardware and
> > > > service interrupts from the hardware to the DMA engine driver.  This
> > > > reduces the dependency on the legacy DMA implementation.
> > > > 
> > > > This series does not remove the channel allocation/freeing hooks which
> > > > are used to manage the allocation of physical channels - this is the
> > > > next step in the evolution.
> > > > 
> > > > The patches which move the interrupt handling are currently less than
> > > > perfect since they're writing to ENABLE_L0 under a different spinlock,
> > > > and hence RFC only at the moment.
> > > 
> > > Nice to see this happening. These seem to work for me based on a quick
> > > try on omap2+, but on omap1 the build fails:
> > > 
> > > arch/arm/mach-omap1/dma.c: In function ?dma_write?:
> > > arch/arm/mach-omap1/dma.c:186: error: ?const struct omap_dma_reg? has no member named ?size?
> > 
> > Right, needs this incremental patch:
> > 
> > diff --git a/arch/arm/mach-omap1/dma.c b/arch/arm/mach-omap1/dma.c
> > index 3afde9628839..404f89e3eeb8 100644
> > --- a/arch/arm/mach-omap1/dma.c
> > +++ b/arch/arm/mach-omap1/dma.c
> > @@ -183,7 +183,7 @@ static inline void dma_write(u32 val, int reg, int lch)
> >  	addr += reg_map[reg].stride * lch;
> >  
> >  	__raw_writew(val, addr);
> > -	if (reg_map[reg].size == OMAP_DMA_REG_2X16BIT)
> > +	if (reg_map[reg].type == OMAP_DMA_REG_2X16BIT)
> >  		__raw_writew(val >> 16, addr + 2);
> >  }
> >  
> > @@ -196,7 +196,7 @@ static inline u32 dma_read(int reg, int lch)
> >  	addr += reg_map[reg].stride * lch;
> >  
> >  	val = __raw_readw(addr);
> > -	if (reg_map[reg].size == OMAP_DMA_REG_2X16BIT)
> > +	if (reg_map[reg].type == OMAP_DMA_REG_2X16BIT)
> >  		val |= __raw_readw(addr + 2) << 16;
> >  
> >  	return val;
> > 
> 
> Any news on this?

Sorry for the delay, now getting this:

arch/arm/mach-omap1/dma.c: In function ?omap1_system_dma_init?:
arch/arm/mach-omap1/dma.c:368: error: ?struct omap_dma_dev_attr? has no member named ?chan?

Regards,

Tony