From: mturquette@linaro.org (Mike Turquette)
To: linux-arm-kernel@lists.infradead.org
Subject: [RFC PATCH] clk: composite: support determine_rate using rate_ops->round_rate + mux_ops->set_parent
Date: Tue, 14 Jan 2014 12:41:46 -0800 [thread overview]
Message-ID: <20140114204146.4167.2654@quantum> (raw)
In-Reply-To: <1389114233-11162-1-git-send-email-b.brezillon@overkiz.com>
Quoting Boris BREZILLON (2014-01-07 09:03:52)
> In case the rate_hw does not implement determine_rate, but only round_rate
> we fallback to best_parent selection if mux_hw is present and support
> reparenting.
>
> Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com>
Hi Boris,
Since this change affects users of the composite clock type I will hold
off reviewing/applying this patch until after the merge window.
Thanks,
Mike
> ---
> drivers/clk/clk-composite.c | 49 ++++++++++++++++++++++++++++++++++++++++++-
> 1 file changed, 48 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/clk/clk-composite.c b/drivers/clk/clk-composite.c
> index 753d0b7..d3cf49a 100644
> --- a/drivers/clk/clk-composite.c
> +++ b/drivers/clk/clk-composite.c
> @@ -64,11 +64,57 @@ static long clk_composite_determine_rate(struct clk_hw *hw, unsigned long rate,
> const struct clk_ops *mux_ops = composite->mux_ops;
> struct clk_hw *rate_hw = composite->rate_hw;
> struct clk_hw *mux_hw = composite->mux_hw;
> + struct clk *parent;
> + unsigned long parent_rate;
> + long tmp_rate;
> + unsigned long rate_diff;
> + unsigned long best_rate_diff = ULONG_MAX;
> + int i;
>
> if (rate_hw && rate_ops && rate_ops->determine_rate) {
> rate_hw->clk = hw->clk;
> return rate_ops->determine_rate(rate_hw, rate, best_parent_rate,
> best_parent_p);
> + } else if (rate_hw && rate_ops && rate_ops->round_rate &&
> + mux_hw && mux_ops && mux_ops->set_parent) {
> + *best_parent_p = NULL;
> +
> + if (__clk_get_flags(hw->clk) & CLK_SET_RATE_NO_REPARENT) {
> + *best_parent_p = clk_get_parent(mux_hw->clk);
> + *best_parent_rate = __clk_get_rate(*best_parent_p);
> +
> + return rate_ops->round_rate(rate_hw, rate,
> + best_parent_rate);
> + }
> +
> + for (i = 0; i < __clk_get_num_parents(mux_hw->clk); i++) {
> + parent = clk_get_parent_by_index(mux_hw->clk, i);
> + if (!parent)
> + continue;
> +
> + parent_rate = __clk_get_rate(parent);
> +
> + tmp_rate = rate_ops->round_rate(rate_hw, rate,
> + &parent_rate);
> + if (tmp_rate < 0)
> + continue;
> +
> + if (tmp_rate < rate)
> + rate_diff = rate - tmp_rate;
> + else
> + rate_diff = tmp_rate - rate;
> +
> + if (!rate_diff || !*best_parent_p || best_rate_diff > rate_diff) {
> + *best_parent_p = parent;
> + *best_parent_rate = parent_rate;
> + best_rate_diff = rate_diff;
> + }
> +
> + if (!rate_diff)
> + return rate;
> + }
> +
> + return best_rate_diff;
> } else if (mux_hw && mux_ops && mux_ops->determine_rate) {
> mux_hw->clk = hw->clk;
> return mux_ops->determine_rate(rate_hw, rate, best_parent_rate,
> @@ -196,7 +242,8 @@ struct clk *clk_register_composite(struct device *dev, const char *name,
> composite->rate_hw = rate_hw;
> composite->rate_ops = rate_ops;
> clk_composite_ops->recalc_rate = clk_composite_recalc_rate;
> - if (rate_ops->determine_rate)
> + if (rate_ops->determine_rate ||
> + (rate_ops->round_rate && clk_composite_ops->set_parent))
> clk_composite_ops->determine_rate = clk_composite_determine_rate;
> }
>
> --
> 1.7.9.5
>
next prev parent reply other threads:[~2014-01-14 20:41 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-12-23 3:32 [PATCH v3 00/13] clk: sunxi: add PLL5 and PLL6 support Emilio López
2013-12-23 3:32 ` [PATCH v3 01/13] clk: sunxi: register factors clocks behind composite Emilio López
2014-01-07 16:56 ` boris brezillon
2014-01-07 17:47 ` Emilio López
2014-01-07 20:46 ` Boris Brezillon
2014-01-08 9:30 ` boris brezillon
2014-01-07 17:02 ` [RFC PATCH] clk: composite: support determine_rate using rate_ops->round_rate + mux_ops->set_parent Boris BREZILLON
2014-01-07 17:03 ` Boris BREZILLON
2014-01-14 20:41 ` Mike Turquette [this message]
2014-05-18 22:23 ` Heiko Stübner
2013-12-23 3:32 ` [PATCH v3 02/13] clk: sunxi: clean the magic number of mux parents Emilio López
2013-12-23 3:32 ` [PATCH v3 03/13] clk: sunxi: add gating support to PLL1 Emilio López
2013-12-23 3:32 ` [PATCH v3 04/13] ARM: sunxi: add PLL4 support Emilio López
2013-12-23 3:32 ` [PATCH v3 05/13] clk: sunxi: make factors_clk_setup return the clock it registers Emilio López
2013-12-23 3:32 ` [PATCH v3 06/13] clk: sunxi: add PLL5 and PLL6 support Emilio López
2013-12-23 3:32 ` [PATCH v3 07/13] ARM: " Emilio López
2013-12-23 3:32 ` [PATCH v3 08/13] clk: sunxi: mod0 support Emilio López
2013-12-23 3:32 ` [PATCH v3 09/13] clk: sunxi: support better factor DT nodes Emilio López
2013-12-23 3:32 ` [PATCH v3 10/13] ARM: sun4i: dt: mod0 clocks Emilio López
2013-12-23 3:32 ` [PATCH v3 11/13] ARM: sun5i: " Emilio López
2013-12-23 3:32 ` [PATCH v3 12/13] ARM: sun7i: " Emilio López
2013-12-23 3:32 ` [PATCH v3 13/13] ARM: sunxi: dt: add nodes for the mbus clock Emilio López
[not found] ` <20131223054401.22761.10523@quantum>
2013-12-23 13:22 ` [PATCH v3 00/13] clk: sunxi: add PLL5 and PLL6 support Emilio López
2013-12-23 19:37 ` Mike Turquette
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140114204146.4167.2654@quantum \
--to=mturquette@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).