From mboxrd@z Thu Jan  1 00:00:00 1970
From: phdm@macq.eu (Philippe De Muyter)
Date: Wed, 15 Jan 2014 11:49:23 +0100
Subject: imx6dl/imx6q fec rmii mode with external ref_clk
In-Reply-To: <CAOMZO5AhTLN+aCRH0FOVFO3uoZqe=2DpSiAHO2NCCTd=yJSyHg@mail.gmail.com>
References: <20140114153012.GA22550@frolo.macqel>
 <20140115073536.GD1914@S2101-09.ap.freescale.net>
 <20140115094551.GA26117@frolo.macqel>
 <CAOMZO5AhTLN+aCRH0FOVFO3uoZqe=2DpSiAHO2NCCTd=yJSyHg@mail.gmail.com>
Message-ID: <20140115104923.GA1239@frolo.macqel>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

On Wed, Jan 15, 2014 at 08:13:15AM -0200, Fabio Estevam wrote:
> On Wed, Jan 15, 2014 at 7:45 AM, Philippe De Muyter <phdm@macq.eu> wrote:
> 
> > Here are my patches (I have called my board imx6dl-p6-2094):
> > Do I need to replace the hex value after MX6QDL_PAD_GPIO_16__ENET_REF_CLK
> > by something else ?
> 
> hummingboard uses:
> 
> MX6QDL_PAD_GPIO_16__ENET_REF_CLK    0xc0000000

I quickly tried that, but that does not solve my problem (still tx timeout)

> 
> Check arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi in linux-next.

I will look there now.

Thanks

Philippe

-- 
Philippe De Muyter +32 2 6101532 Macq SA rue de l'Aeronef 2 B-1140 Bruxelles