From: mturquette@linaro.org (Mike Turquette)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 0/8] ARM: sunxi: rename DT clock node names to clk@N
Date: Fri, 17 Jan 2014 16:23:39 -0800 [thread overview]
Message-ID: <20140118002339.4167.12605@quantum> (raw)
In-Reply-To: <52D89E27.6060204@elopez.com.ar>
Quoting Emilio L?pez (2014-01-16 19:06:15)
> Hi,
>
> El 09/01/14 05:52, Chen-Yu Tsai escribi?:
> > This is v3 of the clock node renaming patch series, which renames
> > the clock nodes in sunxi dts to conform to device tree naming
> > conventions, i.e. clk at N. Dummy clocks that will be renamed/removed
> > later, or clocks sharing registers are not renamed.
> >
> > Renamed clock nodes have clock-output-names properties added to
> > desginate their names. Support for this is added in the first
> > patch.
> >
> > Changes since v2:
> >
> > * Dropped Cubietruck dts i2c controller patch. Maxime has taken it.
> > * Changed ARM in commit messages to uppercase.
> > * Add pll5, pll6 clock names to factors_data tied to compatible strings.
> > * Dropped pll5 output name in dts due to the previous change.
> > * Added dts binding documentation for "clock-output-names", as well as
> > examples.
> >
> > Changes since v1:
> >
> > * Fixed pll5, pll6 divs clock name handling
> >
> > Cheers
> > ChenYu
> >
> > Chen-Yu Tsai (8):
> > clk: sunxi: add clock-output-names dt property support
> > clk: sunxi: update clock-output-names dt binding documentation
> > clk: sunxi: add names for pll5, pll6 parent clocks to factors_data
> > clk: sunxi: get divs parent clock name from parent factor clock
> > ARM: dts: sun4i: rename clock node names to clk at N
> > ARM: dts: sun5i: rename clock node names to clk at N
> > ARM: dts: sun6i: rename clock node names to clk at N
> > ARM: dts: sun7i: rename clock node names to clk at N
> >
> > Documentation/devicetree/bindings/clock/sunxi.txt | 36 +++++++++++++++++++----
> > arch/arm/boot/dts/sun4i-a10.dtsi | 24 ++++++++-------
> > arch/arm/boot/dts/sun5i-a10s.dtsi | 24 ++++++++-------
> > arch/arm/boot/dts/sun5i-a13.dtsi | 24 ++++++++-------
> > arch/arm/boot/dts/sun6i-a31.dtsi | 12 ++++----
> > arch/arm/boot/dts/sun7i-a20.dtsi | 19 +++++++-----
> > drivers/clk/sunxi/clk-sunxi.c | 36 ++++++++++++++++-------
> > 7 files changed, 117 insertions(+), 58 deletions(-)
>
> The series looks good to me, other than the comment I made. Once that's
> settled, and if Mike, Maxime or anyone else have no further comments,
> I'll queue 1-4 for 3.15.
Ack for patches 1-4.
Regards,
Mike
>
> Cheers, and thanks for working on this!
>
> Emilio
prev parent reply other threads:[~2014-01-18 0:23 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-01-09 8:52 [PATCH v3 0/8] ARM: sunxi: rename DT clock node names to clk@N Chen-Yu Tsai
2014-01-09 8:52 ` [PATCH v3 1/8] clk: sunxi: add clock-output-names dt property support Chen-Yu Tsai
2014-01-15 7:46 ` Maxime Ripard
2014-01-09 8:52 ` [PATCH v3 2/8] clk: sunxi: update clock-output-names dt binding documentation Chen-Yu Tsai
2014-01-15 8:00 ` Maxime Ripard
2014-01-17 2:55 ` Emilio López
2014-01-29 1:52 ` Chen-Yu Tsai
2014-01-30 15:43 ` Maxime Ripard
2014-01-09 8:52 ` [PATCH v3 3/8] clk: sunxi: add names for pll5, pll6 parent clocks to factors_data Chen-Yu Tsai
2014-01-15 7:44 ` Maxime Ripard
2014-01-09 8:52 ` [PATCH v3 4/8] clk: sunxi: get divs parent clock name from parent factor clock Chen-Yu Tsai
2014-01-09 8:52 ` [PATCH v3 5/8] ARM: dts: sun4i: rename clock node names to clk@N Chen-Yu Tsai
2014-01-09 8:52 ` [PATCH v3 6/8] ARM: dts: sun5i: " Chen-Yu Tsai
2014-01-09 8:52 ` [PATCH v3 7/8] ARM: dts: sun6i: " Chen-Yu Tsai
2014-01-09 8:52 ` [PATCH v3 8/8] ARM: dts: sun7i: " Chen-Yu Tsai
2014-01-17 3:06 ` [PATCH v3 0/8] ARM: sunxi: rename DT " Emilio López
2014-01-18 0:23 ` Mike Turquette [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140118002339.4167.12605@quantum \
--to=mturquette@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox