From: moinejf@free.fr (Jean-Francois Moine)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 19/24] drm/i2c: tda998x: use global constants
Date: Sun, 19 Jan 2014 19:58:45 +0100 [thread overview]
Message-ID: <20140119195845.13b8a0e9@armhf> (raw)
In-Reply-To: <cover.1390153344.git.moinejf@free.fr>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
---
drivers/gpu/drm/i2c/tda998x_drv.c | 25 +++++++++++++------------
1 file changed, 13 insertions(+), 12 deletions(-)
diff --git a/drivers/gpu/drm/i2c/tda998x_drv.c b/drivers/gpu/drm/i2c/tda998x_drv.c
index ce832f0..324dc13 100644
--- a/drivers/gpu/drm/i2c/tda998x_drv.c
+++ b/drivers/gpu/drm/i2c/tda998x_drv.c
@@ -132,6 +132,8 @@ struct tda998x_priv {
# define VIP_CNTRL_5_CKCASE (1 << 0)
# define VIP_CNTRL_5_SP_CNT(x) (((x) & 3) << 1)
#define REG_MUX_AP REG(0x00, 0x26) /* read/write */
+# define MUX_AP_SELECT_I2S 0x64
+# define MUX_AP_SELECT_SPDIF 0x40
#define REG_MUX_VP_VIP_OUT REG(0x00, 0x27) /* read/write */
#define REG_MAT_CONTRL REG(0x00, 0x80) /* write */
# define MAT_CONTRL_MAT_SC(x) (((x) & 3) << 0)
@@ -209,10 +211,11 @@ struct tda998x_priv {
#define REG_I2S_FORMAT REG(0x00, 0xfc) /* read/write */
# define I2S_FORMAT(x) (((x) & 3) << 0)
#define REG_AIP_CLKSEL REG(0x00, 0xfd) /* write */
-# define AIP_CLKSEL_FS(x) (((x) & 3) << 0)
-# define AIP_CLKSEL_CLK_POL(x) (((x) & 1) << 2)
-# define AIP_CLKSEL_AIP(x) (((x) & 7) << 3)
-
+# define AIP_CLKSEL_AIP_SPDIF (0 << 3)
+# define AIP_CLKSEL_AIP_I2S (1 << 3)
+# define AIP_CLKSEL_FS_ACLK (0 << 0)
+# define AIP_CLKSEL_FS_MCLK (1 << 0)
+# define AIP_CLKSEL_FS_FS64SPDIF (2 << 0)
/* Page 02h: PLL settings */
#define REG_PLL_SERIAL_1 REG(0x02, 0x00) /* read/write */
@@ -677,20 +680,18 @@ tda998x_configure_audio(struct tda998x_priv *priv,
/* Set audio input source */
switch (priv->audio_format) {
case AFMT_SPDIF:
- reg_write(priv, REG_MUX_AP, 0x40);
- clksel_aip = AIP_CLKSEL_AIP(0);
- /* FS64SPDIF */
- clksel_fs = AIP_CLKSEL_FS(2);
+ reg_write(priv, REG_MUX_AP, MUX_AP_SELECT_SPDIF);
+ clksel_aip = AIP_CLKSEL_AIP_SPDIF;
+ clksel_fs = AIP_CLKSEL_FS_FS64SPDIF;
cts_n = CTS_N_M(3) | CTS_N_K(3);
aclk = 0; /* no clock */
ca_i2s = 0;
break;
case AFMT_I2S:
- reg_write(priv, REG_MUX_AP, 0x64);
- clksel_aip = AIP_CLKSEL_AIP(1);
- /* ACLK */
- clksel_fs = AIP_CLKSEL_FS(0);
+ reg_write(priv, REG_MUX_AP, MUX_AP_SELECT_I2S);
+ clksel_aip = AIP_CLKSEL_AIP_I2S;
+ clksel_fs = AIP_CLKSEL_FS_ACLK;
cts_n = CTS_N_M(3) | CTS_N_K(3);
aclk = 1; /* clock enable */
ca_i2s = CA_I2S_CA_I2S(0);
--
1.8.5.3
next prev parent reply other threads:[~2014-01-19 18:58 UTC|newest]
Thread overview: 46+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <cover.1390153344.git.moinejf@free.fr>
2014-01-19 18:58 ` [PATCH v3 01/24] drm/i2c: tda998x: simplify the i2c read/write functions Jean-Francois Moine
2014-01-19 18:58 ` [PATCH v3 03/24] drm/i2c: tda998x: code cleanup Jean-Francois Moine
2014-01-22 21:22 ` Russell King - ARM Linux
2014-01-19 18:58 ` [PATCH v3 04/24] drm/i2c: tda998x: change probe message origin Jean-Francois Moine
2014-01-19 18:58 ` [PATCH v3 02/24] drm/i2c: tda998x: check more I/O errors Jean-Francois Moine
2014-01-22 21:21 ` Russell King - ARM Linux
2014-01-19 18:58 ` [PATCH v3 05/24] drm/i2c: tda998x: don't freeze the system at audio startup time Jean-Francois Moine
2014-01-19 18:58 ` [PATCH v3 06/24] drm/i2c: tda998x: force the page register at " Jean-Francois Moine
2014-01-19 18:58 ` [PATCH v3 07/24] drm/i2c: tda998x: set the video mode from the adjusted value Jean-Francois Moine
2014-01-22 21:28 ` Russell King - ARM Linux
2014-01-23 23:29 ` Darren Etheridge
2014-01-28 17:12 ` Jean-Francois Moine
2014-01-28 19:24 ` Darren Etheridge
2014-01-19 18:58 ` [PATCH v3 08/24] drm/i2c: tda998x: fix bad value in the AIF Jean-Francois Moine
2014-01-19 18:58 ` [PATCH v3 12/24] drm/i2c: tda998x: check the CEC device creation Jean-Francois Moine
2014-01-19 18:58 ` [PATCH v3 11/24] drm/i2c: tda998x: free the CEC device on encoder_destroy Jean-Francois Moine
2014-01-19 18:58 ` [PATCH v3 09/24] drm/i2c: tda998x: use HDMI constants Jean-Francois Moine
2014-01-19 18:58 ` [PATCH v3 10/24] drm/i2c: tda998x: don't read write-only registers Jean-Francois Moine
2014-01-22 21:35 ` Russell King - ARM Linux
2014-01-19 18:58 ` [PATCH v3 13/24] drm/i2c: tda998x: fix a NULL pointer dereference Jean-Francois Moine
2014-01-22 21:41 ` Russell King - ARM Linux
2014-01-19 18:58 ` [PATCH v3 15/24] drm/i2c: tda998x: use irq for connection status and EDID read Jean-Francois Moine
2014-01-22 22:27 ` Russell King - ARM Linux
2014-01-24 17:29 ` Sebastian Hesselbarth
2014-01-24 17:47 ` Russell King - ARM Linux
2014-01-19 18:58 ` [PATCH v3 14/24] drm/i2c: tda998x: add DT support Jean-Francois Moine
2014-01-22 21:37 ` Russell King - ARM Linux
2014-01-19 18:58 ` [PATCH v3 17/24] drm/i2c: tda998x: get a better status of the connection Jean-Francois Moine
2014-01-22 22:51 ` Russell King - ARM Linux
2014-01-19 18:58 ` [PATCH v3 16/24] drm/i2c: tda998x: add DT documentation Jean-Francois Moine
2014-01-20 4:06 ` Olof Johansson
2014-01-20 9:54 ` Jean-Francois Moine
2014-01-21 18:17 ` Olof Johansson
2014-01-22 22:40 ` Russell King - ARM Linux
2014-01-19 18:58 ` Jean-Francois Moine [this message]
2014-01-22 23:29 ` [PATCH v3 19/24] drm/i2c: tda998x: use global constants Russell King - ARM Linux
2014-01-19 18:58 ` [PATCH v3 18/24] drm/i2c: tda998x: fix the ENABLE_SPACE register Jean-Francois Moine
2014-01-22 23:27 ` Russell King - ARM Linux
2014-01-19 18:58 ` [PATCH v3 20/24] drm/i2c: tda998x: remove the unused variable ca_i2s Jean-Francois Moine
2014-01-22 23:30 ` Russell King - ARM Linux
2014-01-19 18:58 ` [PATCH v3 21/24] drm/i2c: tda998x: add the active aspect in HDMI AVI frame Jean-Francois Moine
2014-01-22 23:37 ` Russell King - ARM Linux
2014-01-19 18:58 ` [PATCH v3 23/24] drm/i2c: tda998x: code optimization Jean-Francois Moine
2014-01-19 18:58 ` [PATCH v3 22/24] drm/i2c: tda998x: change the frequence in the audio channel Jean-Francois Moine
2014-01-22 23:52 ` Russell King - ARM Linux
2014-01-19 18:58 ` [PATCH v3 24/24] drm/i2c: tda998x: adjust the audio clock divider for S/PDIF Jean-Francois Moine
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140119195845.13b8a0e9@armhf \
--to=moinejf@free.fr \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).