From: w@1wt.eu (Willy Tarreau)
To: linux-arm-kernel@lists.infradead.org
Subject: [BUG] FL1009: xHCI host not responding to stop endpoint command.
Date: Thu, 23 Jan 2014 12:09:14 +0100 [thread overview]
Message-ID: <20140123110914.GA22913@1wt.eu> (raw)
In-Reply-To: <87sisfjeba.fsf@natisbad.org>
On Thu, Jan 23, 2014 at 09:24:41AM +0100, Arnaud Ebalard wrote:
> Hi Sarah,
>
> Sarah Sharp <sarah.a.sharp@linux.intel.com> writes:
>
> >> > Can you pinpoint the commit that introduced the regression?
> >>
> >> f5182b4155b9d686c5540a6822486400e34ddd98 "xhci: Disable MSI for some Fresco Logic hosts."
> >>
> >> Technically, this is not per se the commit which introduced the
> >> regression but the one that *partially* fixed it by introducing the XHCI
> >> quirk to skip MSI enabling for Fresco Logic chips. The thing is it
> >> should have included the FL1009 in the targets. Sarah, can you confirm
> >> this?
> >
> > I don't know if it should have included FL1009, it was just a guess,
> > based on the fact that the 0x1000 and 0x1400 devices did need MSI
> > disabled. I can attempt to ask the Fresco Logic folks I know, but I'm
> > not sure if/when I'll get a response back.
> >
> > That still doesn't necessarily rule out MSI issues in the Marvell PCI
> > host controller code. Can you attach another PCI device with MSI
> > support under the host and see if it works?
>
> The various Armada-based devices I have are NAS which do not have PCIe
> slots to plug additional devices (everything is soldered). I don't know
> which device Thomas used for its tests. Just in case, I also added Willy
> in CC: who have various boards and may also have done more test with
> additional PCIe devices and CONFIG_PCI_MSI enabled on 3.13 kernel.
I've been running an intel i350 dual-port NIC (igb driver) supporting
MSI on the mirabox, and it used to work in 3.10+many of the patches
coming from the Free-electrons team. Some recent changes to the PCI
code introduced a regression preventing this driver from correctly
registering an MSI interrupt, and I did not have enough time to
investigate it deep enough to fix it. That said, I know how to hack
it to work again, so if it can be of any use, I can run a test on
the mirabox (armada370) and on the XPGP board (armadaXP).
Willy
next prev parent reply other threads:[~2014-01-23 11:09 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-01-12 20:13 [BUG] FL1009: xHCI host not responding to stop endpoint command Arnaud Ebalard
2014-01-12 21:36 ` Arnaud Ebalard
2014-01-14 17:07 ` Sarah Sharp
2014-01-14 18:11 ` Bjørn Mork
2014-01-14 21:54 ` Arnaud Ebalard
2014-01-15 9:59 ` David Laight
2014-01-15 19:04 ` Arnaud Ebalard
2014-01-16 18:50 ` Sarah Sharp
2014-01-17 6:25 ` Arnaud Ebalard
2014-01-17 8:31 ` Bjørn Mork
2014-01-17 20:54 ` Sarah Sharp
2014-01-18 21:49 ` Arnaud Ebalard
2014-01-21 21:17 ` Sarah Sharp
2014-01-22 22:23 ` Arnaud Ebalard
2014-01-22 22:26 ` Jason Cooper
2014-01-22 22:43 ` Arnaud Ebalard
2014-01-22 23:56 ` Sarah Sharp
2014-01-23 8:24 ` Arnaud Ebalard
2014-01-23 11:09 ` Willy Tarreau [this message]
2014-01-27 22:20 ` Arnaud Ebalard
2014-01-26 13:30 ` Thomas Petazzoni
2014-01-27 18:36 ` Arnaud Ebalard
2014-02-10 18:57 ` Arnaud Ebalard
2014-02-14 0:09 ` Sarah Sharp
2014-02-14 8:26 ` Thomas Petazzoni
2014-02-18 13:10 ` Thomas Petazzoni
2014-02-18 20:54 ` Arnaud Ebalard
2014-02-18 21:24 ` Thomas Petazzoni
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140123110914.GA22913@1wt.eu \
--to=w@1wt.eu \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).