From: moinejf@free.fr (Jean-Francois Moine)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 19/24] drm/i2c: tda998x: make the audio code more readable
Date: Sat, 25 Jan 2014 18:14:40 +0100 [thread overview]
Message-ID: <20140125181440.5117854e@armhf> (raw)
In-Reply-To: <cover.1390646891.git.moinejf@free.fr>
This patch adds a definition of the values of the MUX_AP register and
simplifies the macro's defining the fields of the AIP_CLKSEL register.
This makes the format specific audio init sequence more readable.
Tested-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
---
drivers/gpu/drm/i2c/tda998x_drv.c | 25 +++++++++++++------------
1 file changed, 13 insertions(+), 12 deletions(-)
diff --git a/drivers/gpu/drm/i2c/tda998x_drv.c b/drivers/gpu/drm/i2c/tda998x_drv.c
index 077b954..ebfb653 100644
--- a/drivers/gpu/drm/i2c/tda998x_drv.c
+++ b/drivers/gpu/drm/i2c/tda998x_drv.c
@@ -125,6 +125,8 @@ struct tda998x_priv {
# define VIP_CNTRL_5_CKCASE (1 << 0)
# define VIP_CNTRL_5_SP_CNT(x) (((x) & 3) << 1)
#define REG_MUX_AP REG(0x00, 0x26) /* read/write */
+# define MUX_AP_SELECT_I2S 0x64
+# define MUX_AP_SELECT_SPDIF 0x40
#define REG_MUX_VP_VIP_OUT REG(0x00, 0x27) /* read/write */
#define REG_MAT_CONTRL REG(0x00, 0x80) /* write */
# define MAT_CONTRL_MAT_SC(x) (((x) & 3) << 0)
@@ -202,10 +204,11 @@ struct tda998x_priv {
#define REG_I2S_FORMAT REG(0x00, 0xfc) /* read/write */
# define I2S_FORMAT(x) (((x) & 3) << 0)
#define REG_AIP_CLKSEL REG(0x00, 0xfd) /* write */
-# define AIP_CLKSEL_FS(x) (((x) & 3) << 0)
-# define AIP_CLKSEL_CLK_POL(x) (((x) & 1) << 2)
-# define AIP_CLKSEL_AIP(x) (((x) & 7) << 3)
-
+# define AIP_CLKSEL_AIP_SPDIF (0 << 3)
+# define AIP_CLKSEL_AIP_I2S (1 << 3)
+# define AIP_CLKSEL_FS_ACLK (0 << 0)
+# define AIP_CLKSEL_FS_MCLK (1 << 0)
+# define AIP_CLKSEL_FS_FS64SPDIF (2 << 0)
/* Page 02h: PLL settings */
#define REG_PLL_SERIAL_1 REG(0x02, 0x00) /* read/write */
@@ -644,19 +647,17 @@ tda998x_configure_audio(struct tda998x_priv *priv,
/* Set audio input source */
switch (p->audio_format) {
case AFMT_SPDIF:
- reg_write(priv, REG_MUX_AP, 0x40);
- clksel_aip = AIP_CLKSEL_AIP(0);
- /* FS64SPDIF */
- clksel_fs = AIP_CLKSEL_FS(2);
+ reg_write(priv, REG_MUX_AP, MUX_AP_SELECT_SPDIF);
+ clksel_aip = AIP_CLKSEL_AIP_SPDIF;
+ clksel_fs = AIP_CLKSEL_FS_FS64SPDIF;
cts_n = CTS_N_M(3) | CTS_N_K(3);
ca_i2s = 0;
break;
case AFMT_I2S:
- reg_write(priv, REG_MUX_AP, 0x64);
- clksel_aip = AIP_CLKSEL_AIP(1);
- /* ACLK */
- clksel_fs = AIP_CLKSEL_FS(0);
+ reg_write(priv, REG_MUX_AP, MUX_AP_SELECT_I2S);
+ clksel_aip = AIP_CLKSEL_AIP_I2S;
+ clksel_fs = AIP_CLKSEL_FS_ACLK;
cts_n = CTS_N_M(3) | CTS_N_K(3);
ca_i2s = CA_I2S_CA_I2S(0);
break;
--
1.8.5.3
next prev parent reply other threads:[~2014-01-25 17:14 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <cover.1390646891.git.moinejf@free.fr>
2014-01-25 17:14 ` [PATCH v4 18/24] drm/i2c: tda998x: set the PLL division factor in range 0..3 Jean-Francois Moine
2014-01-25 17:14 ` [PATCH v4 24/24] drm/i2c: tda998x: adjust the audio clock divider for S/PDIF Jean-Francois Moine
2014-01-27 20:12 ` Russell King - ARM Linux
2014-01-25 17:14 ` [PATCH v4 16/24] drm/i2c: tda998x: add DT documentation Jean-Francois Moine
2014-01-25 17:14 ` [PATCH v4 17/24] drm/i2c: tda998x: fix the ENABLE_SPACE register Jean-Francois Moine
2014-01-25 17:14 ` [PATCH v4 15/24] drm/i2c: tda998x: use irq for connection status and EDID read Jean-Francois Moine
2014-01-27 20:20 ` Russell King - ARM Linux
2014-01-25 17:14 ` [PATCH v4 14/24] drm/i2c: tda998x: always enable EDID read IRQ Jean-Francois Moine
2014-01-25 17:14 ` [PATCH v4 22/24] drm/i2c: tda998x: change the frequence in the audio channel Jean-Francois Moine
2014-01-25 17:14 ` [PATCH v4 23/24] drm/i2c: tda998x: code optimization Jean-Francois Moine
2014-01-25 17:14 ` [PATCH v4 20/24] drm/i2c: tda998x: remove the unused variable ca_i2s Jean-Francois Moine
2014-01-25 17:14 ` [PATCH v4 21/24] drm/i2c: tda998x: add the active aspect in HDMI AVI frame Jean-Francois Moine
2014-01-25 17:14 ` Jean-Francois Moine [this message]
2014-01-25 17:14 ` [PATCH v4 09/24] drm/i2c: tda998x: use HDMI constants Jean-Francois Moine
2014-01-25 17:14 ` [PATCH v4 13/24] drm/i2c: tda998x: add DT support Jean-Francois Moine
2014-01-25 17:14 ` [PATCH v4 11/24] drm/i2c: tda998x: free the CEC device on encoder_destroy Jean-Francois Moine
2014-01-25 17:14 ` [PATCH v4 10/24] drm/i2c: tda998x: don't read write-only registers Jean-Francois Moine
2014-01-25 17:14 ` [PATCH v4 07/24] drm/i2c: tda998x: set the video mode from the adjusted value Jean-Francois Moine
2014-01-27 19:59 ` Russell King - ARM Linux
2014-01-25 17:14 ` [PATCH v4 12/24] drm/i2c: tda998x: check the CEC device creation Jean-Francois Moine
2014-01-27 20:01 ` Russell King - ARM Linux
2014-01-25 17:14 ` [PATCH v4 05/24] drm/i2c: tda998x: don't freeze the system at audio startup time Jean-Francois Moine
2014-01-25 17:14 ` [PATCH v4 08/24] drm/i2c: tda998x: fix bad value in the AIF Jean-Francois Moine
2014-01-25 17:14 ` [PATCH v4 06/24] drm/i2c: tda998x: force the page register at startup time Jean-Francois Moine
2014-01-25 17:14 ` [PATCH v4 02/24] drm/i2c: tda998x: check more I/O errors Jean-Francois Moine
2014-01-25 17:14 ` [PATCH v4 03/24] drm/i2c: tda998x: code cleanup Jean-Francois Moine
2014-01-25 17:14 ` [PATCH v4 04/24] drm/i2c: tda998x: change probe message origin Jean-Francois Moine
2014-01-25 17:14 ` [PATCH v4 01/24] drm/i2c: tda998x: simplify the i2c read/write functions Jean-Francois Moine
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140125181440.5117854e@armhf \
--to=moinejf@free.fr \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).