From: moinejf@free.fr (Jean-Francois Moine)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 13/24] drm/i2c: tda998x: add DT support
Date: Sat, 25 Jan 2014 18:14:41 +0100 [thread overview]
Message-ID: <20140125181441.52161a91@armhf> (raw)
In-Reply-To: <cover.1390646891.git.moinejf@free.fr>
This patch adds DT support to the tda998x.
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Tested-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
---
drivers/gpu/drm/i2c/tda998x_drv.c | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
diff --git a/drivers/gpu/drm/i2c/tda998x_drv.c b/drivers/gpu/drm/i2c/tda998x_drv.c
index a3ebc08..0231e44 100644
--- a/drivers/gpu/drm/i2c/tda998x_drv.c
+++ b/drivers/gpu/drm/i2c/tda998x_drv.c
@@ -1164,6 +1164,8 @@ tda998x_encoder_init(struct i2c_client *client,
struct drm_encoder_slave *encoder_slave)
{
struct tda998x_priv *priv;
+ struct device_node *np = client->dev.of_node;
+ u32 video;
int ret;
priv = kzalloc(sizeof(*priv), GFP_KERNEL);
@@ -1232,6 +1234,17 @@ tda998x_encoder_init(struct i2c_client *client,
cec_write(priv, REG_CEC_FRO_IM_CLK_CTRL,
CEC_FRO_IM_CLK_CTRL_GHOST_DIS | CEC_FRO_IM_CLK_CTRL_IMCLK_SEL);
+ if (!np)
+ return 0; /* non-DT */
+
+ /* get the optional video properties */
+ ret = of_property_read_u32(np, "video-ports", &video);
+ if (ret == 0) {
+ priv->vip_cntrl_0 = video >> 16;
+ priv->vip_cntrl_1 = video >> 8;
+ priv->vip_cntrl_2 = video;
+ }
+
return 0;
fail:
@@ -1246,6 +1259,14 @@ fail:
return -ENXIO;
}
+#ifdef CONFIG_OF
+static const struct of_device_id tda998x_dt_ids[] = {
+ { .compatible = "nxp,tda998x", },
+ { }
+};
+MODULE_DEVICE_TABLE(of, tda998x_dt_ids);
+#endif
+
static struct i2c_device_id tda998x_ids[] = {
{ "tda998x", 0 },
{ }
@@ -1258,6 +1279,7 @@ static struct drm_i2c_encoder_driver tda998x_driver = {
.remove = tda998x_remove,
.driver = {
.name = "tda998x",
+ .of_match_table = of_match_ptr(tda998x_dt_ids),
},
.id_table = tda998x_ids,
},
--
1.8.5.3
next prev parent reply other threads:[~2014-01-25 17:14 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <cover.1390646891.git.moinejf@free.fr>
2014-01-25 17:14 ` [PATCH v4 18/24] drm/i2c: tda998x: set the PLL division factor in range 0..3 Jean-Francois Moine
2014-01-25 17:14 ` [PATCH v4 24/24] drm/i2c: tda998x: adjust the audio clock divider for S/PDIF Jean-Francois Moine
2014-01-27 20:12 ` Russell King - ARM Linux
2014-01-25 17:14 ` [PATCH v4 16/24] drm/i2c: tda998x: add DT documentation Jean-Francois Moine
2014-01-25 17:14 ` [PATCH v4 17/24] drm/i2c: tda998x: fix the ENABLE_SPACE register Jean-Francois Moine
2014-01-25 17:14 ` [PATCH v4 14/24] drm/i2c: tda998x: always enable EDID read IRQ Jean-Francois Moine
2014-01-25 17:14 ` [PATCH v4 15/24] drm/i2c: tda998x: use irq for connection status and EDID read Jean-Francois Moine
2014-01-27 20:20 ` Russell King - ARM Linux
2014-01-25 17:14 ` [PATCH v4 22/24] drm/i2c: tda998x: change the frequence in the audio channel Jean-Francois Moine
2014-01-25 17:14 ` [PATCH v4 23/24] drm/i2c: tda998x: code optimization Jean-Francois Moine
2014-01-25 17:14 ` [PATCH v4 20/24] drm/i2c: tda998x: remove the unused variable ca_i2s Jean-Francois Moine
2014-01-25 17:14 ` [PATCH v4 19/24] drm/i2c: tda998x: make the audio code more readable Jean-Francois Moine
2014-01-25 17:14 ` [PATCH v4 21/24] drm/i2c: tda998x: add the active aspect in HDMI AVI frame Jean-Francois Moine
2014-01-25 17:14 ` [PATCH v4 09/24] drm/i2c: tda998x: use HDMI constants Jean-Francois Moine
2014-01-25 17:14 ` Jean-Francois Moine [this message]
2014-01-25 17:14 ` [PATCH v4 11/24] drm/i2c: tda998x: free the CEC device on encoder_destroy Jean-Francois Moine
2014-01-25 17:14 ` [PATCH v4 10/24] drm/i2c: tda998x: don't read write-only registers Jean-Francois Moine
2014-01-25 17:14 ` [PATCH v4 12/24] drm/i2c: tda998x: check the CEC device creation Jean-Francois Moine
2014-01-27 20:01 ` Russell King - ARM Linux
2014-01-25 17:14 ` [PATCH v4 07/24] drm/i2c: tda998x: set the video mode from the adjusted value Jean-Francois Moine
2014-01-27 19:59 ` Russell King - ARM Linux
2014-01-25 17:14 ` [PATCH v4 05/24] drm/i2c: tda998x: don't freeze the system at audio startup time Jean-Francois Moine
2014-01-25 17:14 ` [PATCH v4 08/24] drm/i2c: tda998x: fix bad value in the AIF Jean-Francois Moine
2014-01-25 17:14 ` [PATCH v4 06/24] drm/i2c: tda998x: force the page register at startup time Jean-Francois Moine
2014-01-25 17:14 ` [PATCH v4 02/24] drm/i2c: tda998x: check more I/O errors Jean-Francois Moine
2014-01-25 17:14 ` [PATCH v4 03/24] drm/i2c: tda998x: code cleanup Jean-Francois Moine
2014-01-25 17:14 ` [PATCH v4 04/24] drm/i2c: tda998x: change probe message origin Jean-Francois Moine
2014-01-25 17:14 ` [PATCH v4 01/24] drm/i2c: tda998x: simplify the i2c read/write functions Jean-Francois Moine
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140125181441.52161a91@armhf \
--to=moinejf@free.fr \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).