From: moinejf@free.fr (Jean-Francois Moine)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 10/24] drm/i2c: tda998x: don't read write-only registers
Date: Sat, 25 Jan 2014 18:14:42 +0100 [thread overview]
Message-ID: <20140125181442.3e2e6eb0@armhf> (raw)
In-Reply-To: <cover.1390646891.git.moinejf@free.fr>
This patch takes care of the write-only registers of the tda998x.
The registers SOFTRESET, TBG_CNTRL_0 and TBG_CNTRL_1 have all bits
cleared after reset, so, they may be fully re-written.
The register MAT_CONTRL is set to
MAT_CONTRL_MAT_BP | MAT_CONTRL_MAT_SC(1)
after reset, so, it may be fully set again to this value.
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
---
drivers/gpu/drm/i2c/tda998x_drv.c | 46 ++++++++++++++++++++-------------------
1 file changed, 24 insertions(+), 22 deletions(-)
diff --git a/drivers/gpu/drm/i2c/tda998x_drv.c b/drivers/gpu/drm/i2c/tda998x_drv.c
index 978edaf..b6fdeb7 100644
--- a/drivers/gpu/drm/i2c/tda998x_drv.c
+++ b/drivers/gpu/drm/i2c/tda998x_drv.c
@@ -495,9 +495,9 @@ static void
tda998x_reset(struct tda998x_priv *priv)
{
/* reset audio and i2c master: */
- reg_set(priv, REG_SOFTRESET, SOFTRESET_AUDIO | SOFTRESET_I2C_MASTER);
+ reg_write(priv, REG_SOFTRESET, SOFTRESET_AUDIO | SOFTRESET_I2C_MASTER);
msleep(50);
- reg_clear(priv, REG_SOFTRESET, SOFTRESET_AUDIO | SOFTRESET_I2C_MASTER);
+ reg_write(priv, REG_SOFTRESET, 0);
msleep(50);
/* reset transmitter: */
@@ -853,7 +853,7 @@ tda998x_encoder_mode_set(struct drm_encoder *encoder,
reg_set(priv, REG_AIP_CNTRL_0, AIP_CNTRL_0_RST_FIFO);
/* set HDMI HDCP mode off: */
- reg_set(priv, REG_TBG_CNTRL_1, TBG_CNTRL_1_DWIN_DIS);
+ reg_write(priv, REG_TBG_CNTRL_1, TBG_CNTRL_1_DWIN_DIS);
reg_clear(priv, REG_TX33, TX33_HDMI);
reg_write(priv, REG_ENC_CNTRL, ENC_CNTRL_CTL_CODE(0));
@@ -880,38 +880,28 @@ tda998x_encoder_mode_set(struct drm_encoder *encoder,
PLL_SERIAL_2_SRL_PR(rep));
/* set color matrix bypass flag: */
- reg_set(priv, REG_MAT_CONTRL, MAT_CONTRL_MAT_BP);
+ reg_write(priv, REG_MAT_CONTRL, MAT_CONTRL_MAT_BP |
+ MAT_CONTRL_MAT_SC(1));
/* set BIAS tmds value: */
reg_write(priv, REG_ANA_GENERAL, 0x09);
- reg_clear(priv, REG_TBG_CNTRL_0, TBG_CNTRL_0_SYNC_MTHD);
+ reg_write(priv, REG_TBG_CNTRL_0, 0);
/*
* Sync on rising HSYNC/VSYNC
*/
- reg_write(priv, REG_VIP_CNTRL_3, 0);
- reg_set(priv, REG_VIP_CNTRL_3, VIP_CNTRL_3_SYNC_HS);
+ reg = VIP_CNTRL_3_SYNC_HS;
/*
* TDA19988 requires high-active sync at input stage,
* so invert low-active sync provided by master encoder here
*/
if (adj_mode->flags & DRM_MODE_FLAG_NHSYNC)
- reg_set(priv, REG_VIP_CNTRL_3, VIP_CNTRL_3_H_TGL);
+ reg |= VIP_CNTRL_3_H_TGL;
if (adj_mode->flags & DRM_MODE_FLAG_NVSYNC)
- reg_set(priv, REG_VIP_CNTRL_3, VIP_CNTRL_3_V_TGL);
-
- /*
- * Always generate sync polarity relative to input sync and
- * revert input stage toggled sync at output stage
- */
- reg = TBG_CNTRL_1_TGL_EN;
- if (adj_mode->flags & DRM_MODE_FLAG_NHSYNC)
- reg |= TBG_CNTRL_1_H_TGL;
- if (adj_mode->flags & DRM_MODE_FLAG_NVSYNC)
- reg |= TBG_CNTRL_1_V_TGL;
- reg_write(priv, REG_TBG_CNTRL_1, reg);
+ reg |= VIP_CNTRL_3_V_TGL;
+ reg_write(priv, REG_VIP_CNTRL_3, reg);
reg_write(priv, REG_VIDFORMAT, 0x00);
reg_write16(priv, REG_REFPIX_MSB, ref_pix);
@@ -940,13 +930,25 @@ tda998x_encoder_mode_set(struct drm_encoder *encoder,
reg_write(priv, REG_ENABLE_SPACE, 0x01);
}
+ /*
+ * Always generate sync polarity relative to input sync and
+ * revert input stage toggled sync at output stage
+ */
+ reg = TBG_CNTRL_1_DWIN_DIS | TBG_CNTRL_1_TGL_EN;
+ if (adj_mode->flags & DRM_MODE_FLAG_NHSYNC)
+ reg |= TBG_CNTRL_1_H_TGL;
+ if (adj_mode->flags & DRM_MODE_FLAG_NVSYNC)
+ reg |= TBG_CNTRL_1_V_TGL;
+ reg_write(priv, REG_TBG_CNTRL_1, reg);
+
/* must be last register set: */
- reg_clear(priv, REG_TBG_CNTRL_0, TBG_CNTRL_0_SYNC_ONCE);
+ reg_write(priv, REG_TBG_CNTRL_0, 0);
/* Only setup the info frames if the sink is HDMI */
if (priv->is_hdmi_sink) {
/* We need to turn HDMI HDCP stuff on to get audio through */
- reg_clear(priv, REG_TBG_CNTRL_1, TBG_CNTRL_1_DWIN_DIS);
+ reg &= ~TBG_CNTRL_1_DWIN_DIS;
+ reg_write(priv, REG_TBG_CNTRL_1, reg);
reg_write(priv, REG_ENC_CNTRL, ENC_CNTRL_CTL_CODE(1));
reg_set(priv, REG_TX33, TX33_HDMI);
--
1.8.5.3
next prev parent reply other threads:[~2014-01-25 17:14 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <cover.1390646891.git.moinejf@free.fr>
2014-01-25 17:14 ` [PATCH v4 24/24] drm/i2c: tda998x: adjust the audio clock divider for S/PDIF Jean-Francois Moine
2014-01-27 20:12 ` Russell King - ARM Linux
2014-01-25 17:14 ` [PATCH v4 18/24] drm/i2c: tda998x: set the PLL division factor in range 0..3 Jean-Francois Moine
2014-01-25 17:14 ` [PATCH v4 17/24] drm/i2c: tda998x: fix the ENABLE_SPACE register Jean-Francois Moine
2014-01-25 17:14 ` [PATCH v4 16/24] drm/i2c: tda998x: add DT documentation Jean-Francois Moine
2014-01-25 17:14 ` [PATCH v4 15/24] drm/i2c: tda998x: use irq for connection status and EDID read Jean-Francois Moine
2014-01-27 20:20 ` Russell King - ARM Linux
2014-01-25 17:14 ` [PATCH v4 14/24] drm/i2c: tda998x: always enable EDID read IRQ Jean-Francois Moine
2014-01-25 17:14 ` [PATCH v4 23/24] drm/i2c: tda998x: code optimization Jean-Francois Moine
2014-01-25 17:14 ` [PATCH v4 22/24] drm/i2c: tda998x: change the frequence in the audio channel Jean-Francois Moine
2014-01-25 17:14 ` [PATCH v4 21/24] drm/i2c: tda998x: add the active aspect in HDMI AVI frame Jean-Francois Moine
2014-01-25 17:14 ` [PATCH v4 19/24] drm/i2c: tda998x: make the audio code more readable Jean-Francois Moine
2014-01-25 17:14 ` [PATCH v4 20/24] drm/i2c: tda998x: remove the unused variable ca_i2s Jean-Francois Moine
2014-01-25 17:14 ` [PATCH v4 13/24] drm/i2c: tda998x: add DT support Jean-Francois Moine
2014-01-25 17:14 ` [PATCH v4 09/24] drm/i2c: tda998x: use HDMI constants Jean-Francois Moine
2014-01-25 17:14 ` Jean-Francois Moine [this message]
2014-01-25 17:14 ` [PATCH v4 11/24] drm/i2c: tda998x: free the CEC device on encoder_destroy Jean-Francois Moine
2014-01-25 17:14 ` [PATCH v4 07/24] drm/i2c: tda998x: set the video mode from the adjusted value Jean-Francois Moine
2014-01-27 19:59 ` Russell King - ARM Linux
2014-01-25 17:14 ` [PATCH v4 12/24] drm/i2c: tda998x: check the CEC device creation Jean-Francois Moine
2014-01-27 20:01 ` Russell King - ARM Linux
2014-01-25 17:14 ` [PATCH v4 08/24] drm/i2c: tda998x: fix bad value in the AIF Jean-Francois Moine
2014-01-25 17:14 ` [PATCH v4 05/24] drm/i2c: tda998x: don't freeze the system at audio startup time Jean-Francois Moine
2014-01-25 17:14 ` [PATCH v4 02/24] drm/i2c: tda998x: check more I/O errors Jean-Francois Moine
2014-01-25 17:14 ` [PATCH v4 06/24] drm/i2c: tda998x: force the page register at startup time Jean-Francois Moine
2014-01-25 17:14 ` [PATCH v4 04/24] drm/i2c: tda998x: change probe message origin Jean-Francois Moine
2014-01-25 17:14 ` [PATCH v4 03/24] drm/i2c: tda998x: code cleanup Jean-Francois Moine
2014-01-25 17:14 ` [PATCH v4 01/24] drm/i2c: tda998x: simplify the i2c read/write functions Jean-Francois Moine
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140125181442.3e2e6eb0@armhf \
--to=moinejf@free.fr \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).