linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: moinejf@free.fr (Jean-Francois Moine)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 02/24] drm/i2c: tda998x: check more I/O errors
Date: Sat, 25 Jan 2014 18:14:45 +0100	[thread overview]
Message-ID: <20140125181445.38f8b30b@armhf> (raw)
In-Reply-To: <cover.1390646891.git.moinejf@free.fr>

This patch adds more error checking inn I2C I/O functions.
In case of I/O error, this permits to avoid writing in bad controller
pages, a bad chipset detection or looping when getting the EDID.

Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Tested-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
---
 drivers/gpu/drm/i2c/tda998x_drv.c | 57 +++++++++++++++++++++++++++++----------
 1 file changed, 43 insertions(+), 14 deletions(-)

diff --git a/drivers/gpu/drm/i2c/tda998x_drv.c b/drivers/gpu/drm/i2c/tda998x_drv.c
index 26dd299..11f0607 100644
--- a/drivers/gpu/drm/i2c/tda998x_drv.c
+++ b/drivers/gpu/drm/i2c/tda998x_drv.c
@@ -362,7 +362,7 @@ fail:
 	return 0;
 }
 
-static void
+static int
 set_page(struct tda998x_priv *priv, uint16_t reg)
 {
 	if (REG2PAGE(reg) != priv->current_page) {
@@ -371,11 +371,14 @@ set_page(struct tda998x_priv *priv, uint16_t reg)
 				REG_CURPAGE, REG2PAGE(reg)
 		};
 		int ret = i2c_master_send(client, buf, sizeof(buf));
-		if (ret < 0)
+		if (ret < 0) {
 			dev_err(&client->dev, "Error %d writing to REG_CURPAGE\n", ret);
+			return ret;
+		}
 
 		priv->current_page = REG2PAGE(reg);
 	}
+	return 0;
 }
 
 static int
@@ -385,7 +388,9 @@ reg_read_range(struct tda998x_priv *priv, uint16_t reg, char *buf, int cnt)
 	uint8_t addr = REG2ADDR(reg);
 	int ret;
 
-	set_page(priv, reg);
+	ret = set_page(priv, reg);
+	if (ret < 0)
+		return ret;
 
 	ret = i2c_master_send(client, &addr, sizeof(addr));
 	if (ret < 0)
@@ -412,18 +417,24 @@ reg_write_range(struct tda998x_priv *priv, uint16_t reg, uint8_t *p, int cnt)
 	buf[0] = REG2ADDR(reg);
 	memcpy(&buf[1], p, cnt);
 
-	set_page(priv, reg);
+	ret = set_page(priv, reg);
+	if (ret < 0)
+		return;
 
 	ret = i2c_master_send(client, buf, cnt + 1);
 	if (ret < 0)
 		dev_err(&client->dev, "Error %d writing to 0x%x\n", ret, reg);
 }
 
-static uint8_t
+static int
 reg_read(struct tda998x_priv *priv, uint16_t reg)
 {
 	uint8_t val = 0;
-	reg_read_range(priv, reg, &val, sizeof(val));
+	int ret;
+
+	ret = reg_read_range(priv, reg, &val, sizeof(val));
+	if (ret < 0)
+		return ret;
 	return val;
 }
 
@@ -434,7 +445,9 @@ reg_write(struct tda998x_priv *priv, uint16_t reg, uint8_t val)
 	uint8_t buf[] = {REG2ADDR(reg), val};
 	int ret;
 
-	set_page(priv, reg);
+	ret = set_page(priv, reg);
+	if (ret < 0)
+		return;
 
 	ret = i2c_master_send(client, buf, ARRAY_SIZE(buf));
 	if (ret < 0)
@@ -448,7 +461,9 @@ reg_write16(struct tda998x_priv *priv, uint16_t reg, uint16_t val)
 	uint8_t buf[] = {REG2ADDR(reg), val >> 8, val};
 	int ret;
 
-	set_page(priv, reg);
+	ret = set_page(priv, reg);
+	if (ret < 0)
+		return;
 
 	ret = i2c_master_send(client, buf, ARRAY_SIZE(buf));
 	if (ret < 0)
@@ -458,13 +473,21 @@ reg_write16(struct tda998x_priv *priv, uint16_t reg, uint16_t val)
 static void
 reg_set(struct tda998x_priv *priv, uint16_t reg, uint8_t val)
 {
-	reg_write(priv, reg, reg_read(priv, reg) | val);
+	int old_val;
+
+	old_val = reg_read(priv, reg);
+	if (old_val >= 0)
+		reg_write(priv, reg, old_val | val);
 }
 
 static void
 reg_clear(struct tda998x_priv *priv, uint16_t reg, uint8_t val)
 {
-	reg_write(priv, reg, reg_read(priv, reg) & ~val);
+	int old_val;
+
+	old_val = reg_read(priv, reg);
+	if (old_val >= 0)
+		reg_write(priv, reg, old_val & ~val);
 }
 
 static void
@@ -970,8 +993,10 @@ read_edid_block(struct drm_encoder *encoder, uint8_t *buf, int blk)
 
 	/* wait for block read to complete: */
 	for (i = 100; i > 0; i--) {
-		uint8_t val = reg_read(priv, REG_INT_FLAGS_2);
-		if (val & INT_FLAGS_2_EDID_BLK_RD)
+		ret = reg_read(priv, REG_INT_FLAGS_2);
+		if (ret < 0)
+			return ret;
+		if (ret & INT_FLAGS_2_EDID_BLK_RD)
 			break;
 		msleep(1);
 	}
@@ -1134,6 +1159,7 @@ tda998x_encoder_init(struct i2c_client *client,
 		    struct drm_encoder_slave *encoder_slave)
 {
 	struct tda998x_priv *priv;
+	int ret;
 
 	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
 	if (!priv)
@@ -1158,8 +1184,11 @@ tda998x_encoder_init(struct i2c_client *client,
 	tda998x_reset(priv);
 
 	/* read version: */
-	priv->rev = reg_read(priv, REG_VERSION_LSB) |
-			reg_read(priv, REG_VERSION_MSB) << 8;
+	ret = reg_read(priv, REG_VERSION_LSB) |
+		(reg_read(priv, REG_VERSION_MSB) << 8);
+	if (ret < 0)
+		goto fail;
+	priv->rev = ret;
 
 	/* mask off feature bits: */
 	priv->rev &= ~0x30; /* not-hdcp and not-scalar bit */
-- 
1.8.5.3

  parent reply	other threads:[~2014-01-25 17:14 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <cover.1390646891.git.moinejf@free.fr>
2014-01-25 17:14 ` [PATCH v4 18/24] drm/i2c: tda998x: set the PLL division factor in range 0..3 Jean-Francois Moine
2014-01-25 17:14 ` [PATCH v4 24/24] drm/i2c: tda998x: adjust the audio clock divider for S/PDIF Jean-Francois Moine
2014-01-27 20:12   ` Russell King - ARM Linux
2014-01-25 17:14 ` [PATCH v4 17/24] drm/i2c: tda998x: fix the ENABLE_SPACE register Jean-Francois Moine
2014-01-25 17:14 ` [PATCH v4 16/24] drm/i2c: tda998x: add DT documentation Jean-Francois Moine
2014-01-25 17:14 ` [PATCH v4 14/24] drm/i2c: tda998x: always enable EDID read IRQ Jean-Francois Moine
2014-01-25 17:14 ` [PATCH v4 15/24] drm/i2c: tda998x: use irq for connection status and EDID read Jean-Francois Moine
2014-01-27 20:20   ` Russell King - ARM Linux
2014-01-25 17:14 ` [PATCH v4 22/24] drm/i2c: tda998x: change the frequence in the audio channel Jean-Francois Moine
2014-01-25 17:14 ` [PATCH v4 23/24] drm/i2c: tda998x: code optimization Jean-Francois Moine
2014-01-25 17:14 ` [PATCH v4 20/24] drm/i2c: tda998x: remove the unused variable ca_i2s Jean-Francois Moine
2014-01-25 17:14 ` [PATCH v4 19/24] drm/i2c: tda998x: make the audio code more readable Jean-Francois Moine
2014-01-25 17:14 ` [PATCH v4 21/24] drm/i2c: tda998x: add the active aspect in HDMI AVI frame Jean-Francois Moine
2014-01-25 17:14 ` [PATCH v4 09/24] drm/i2c: tda998x: use HDMI constants Jean-Francois Moine
2014-01-25 17:14 ` [PATCH v4 13/24] drm/i2c: tda998x: add DT support Jean-Francois Moine
2014-01-25 17:14 ` [PATCH v4 11/24] drm/i2c: tda998x: free the CEC device on encoder_destroy Jean-Francois Moine
2014-01-25 17:14 ` [PATCH v4 10/24] drm/i2c: tda998x: don't read write-only registers Jean-Francois Moine
2014-01-25 17:14 ` [PATCH v4 12/24] drm/i2c: tda998x: check the CEC device creation Jean-Francois Moine
2014-01-27 20:01   ` Russell King - ARM Linux
2014-01-25 17:14 ` [PATCH v4 07/24] drm/i2c: tda998x: set the video mode from the adjusted value Jean-Francois Moine
2014-01-27 19:59   ` Russell King - ARM Linux
2014-01-25 17:14 ` [PATCH v4 05/24] drm/i2c: tda998x: don't freeze the system at audio startup time Jean-Francois Moine
2014-01-25 17:14 ` [PATCH v4 08/24] drm/i2c: tda998x: fix bad value in the AIF Jean-Francois Moine
2014-01-25 17:14 ` [PATCH v4 06/24] drm/i2c: tda998x: force the page register at startup time Jean-Francois Moine
2014-01-25 17:14 ` Jean-Francois Moine [this message]
2014-01-25 17:14 ` [PATCH v4 03/24] drm/i2c: tda998x: code cleanup Jean-Francois Moine
2014-01-25 17:14 ` [PATCH v4 04/24] drm/i2c: tda998x: change probe message origin Jean-Francois Moine
2014-01-25 17:14 ` [PATCH v4 01/24] drm/i2c: tda998x: simplify the i2c read/write functions Jean-Francois Moine

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20140125181445.38f8b30b@armhf \
    --to=moinejf@free.fr \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).