[PATCH] usb: dwc3: keystone: switch to use runtime pm

[balbi@ti.com (Felipe Balbi)]

Hi,

On Fri, Jan 31, 2014 at 02:20:48PM -0500, Santosh Shilimkar wrote:

[ snip ]

> > note that because of pm_runtime_set_active() that first
> > pm_runtime_get_sync() in probe() will simply increase the reference
> > counter without calling my ->runtime_resume() callback, which is exactly
> > what we want, as that would completely avoid situations of bad context
> > being restored because of that initial pm_runtime_get_sync().
> > 
> Thanks for making your point bit clear. 

no problem.

> > Then, we can even make pm_runtime completely async easily, because
> > clk_prepare() was called only on probe() (or before it, for that
> > matter).
> > 
> > Bottomline is, if you can guarantee me that clk_get(), clk_prepare(),
> > clk_enable() and pm_runtime_set_active() will be called properly before
> > my probe, i'll be more than happy to comply with your request above as
> > that will greatly simplify my driver.
> > 
> Which is the case at least I see on Keystone. And hence the patch from

I was going over pm_domain.c and drivers/base/power/clock_ops.c and none
of them enable pm_runtime or make sure pm_runtime_set_active() is
called.

> Grygorii works. I also noticed your proposal for wider platform to
> enforce above behavior which seems to be a good idea.

it'll take months to stabilize though ;-)

> > Just make, also, that if this clock is shared between dwc3-keystone
> > wrapper and dwc3 core, you clk_get() on both driver's probe.
> > 
> I understand. In summary, whichever patch you pick(yours) or Grygorii's,
> its completely safe to remove the clock handling from Keystone USB driver.

alright, since I can't really test, I'll take this as a true statement.
If there are any regressions I can blame you, hehehe.

cheers

-- 
balbi
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140131/8ff6eefd/attachment.sig>