From: david.lanzendoerfer@o2s.ch (David Lanzendörfer)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 5/7] ARM: dts: sun7i: Add support for mmc
Date: Wed, 05 Feb 2014 14:54:37 +0100 [thread overview]
Message-ID: <20140205135436.3027.8596.stgit@dizzy-6.o2s.ch> (raw)
In-Reply-To: <20140205134741.3027.50207.stgit@dizzy-6.o2s.ch>
Signed-off-by: David Lanzend?rfer <david.lanzendoerfer@o2s.ch>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
arch/arm/boot/dts/sun7i-a20-cubieboard2.dts | 8 +++
arch/arm/boot/dts/sun7i-a20-cubietruck.dts | 8 +++
arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts | 23 +++++++++
arch/arm/boot/dts/sun7i-a20.dtsi | 61 +++++++++++++++++++++++
4 files changed, 100 insertions(+)
diff --git a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
index 5c51cb8..ae800b6 100644
--- a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
+++ b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
@@ -34,6 +34,14 @@
};
};
+ mmc0: mmc at 01c0f000 {
+ pinctrl-names = "default", "default";
+ pinctrl-0 = <&mmc0_pins_a>;
+ pinctrl-1 = <&mmc0_cd_pin_reference_design>;
+ cd-gpios = <&pio 7 1 0>; /* PH1 */
+ status = "okay";
+ };
+
pinctrl at 01c20800 {
led_pins_cubieboard2: led_pins at 0 {
allwinner,pins = "PH20", "PH21";
diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
index f9dcb61..370cef84 100644
--- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
+++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
@@ -19,6 +19,14 @@
compatible = "cubietech,cubietruck", "allwinner,sun7i-a20";
soc at 01c00000 {
+ mmc0: mmc at 01c0f000 {
+ pinctrl-names = "default", "default";
+ pinctrl-0 = <&mmc0_pins_a>;
+ pinctrl-1 = <&mmc0_cd_pin_reference_design>;
+ cd-gpios = <&pio 7 1 0>; /* PH1 */
+ status = "okay";
+ };
+
pinctrl at 01c20800 {
led_pins_cubietruck: led_pins at 0 {
allwinner,pins = "PH7", "PH11", "PH20", "PH21";
diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
index ead3013..46dbe5b 100644
--- a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
+++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
@@ -34,7 +34,30 @@
};
};
+ mmc0: mmc at 01c0f000 {
+ pinctrl-names = "default", "default";
+ pinctrl-0 = <&mmc0_pins_a>;
+ pinctrl-1 = <&mmc0_cd_pin_reference_design>;
+ cd-gpios = <&pio 7 1 0>; /* PH1 */
+ status = "okay";
+ };
+
+ mmc3: mmc at 01c12000 {
+ pinctrl-names = "default", "default";
+ pinctrl-0 = <&mmc3_pins_a>;
+ pinctrl-1 = <&mmc3_cd_pin_olinuxinom>;
+ cd-gpios = <&pio 7 11 0>; /* PH11 */
+ status = "okay";
+ };
+
pinctrl at 01c20800 {
+ mmc3_cd_pin_olinuxinom: mmc3_cd_pin at 0 {
+ allwinner,pins = "PH11";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <0>;
+ allwinner,pull = <0>;
+ };
+
led_pins_olinuxino: led_pins at 0 {
allwinner,pins = "PH2";
allwinner,function = "gpio_out";
diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
index 119f066..4cd6210 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -355,6 +355,46 @@
#size-cells = <0>;
};
+ mmc0: mmc at 01c0f000 {
+ compatible = "allwinner,sun5i-a13-mmc";
+ reg = <0x01c0f000 0x1000>;
+ clocks = <&ahb_gates 8>, <&mmc0_clk>;
+ clock-names = "ahb", "mod";
+ interrupts = <0 32 4>;
+ bus-width = <4>;
+ status = "disabled";
+ };
+
+ mmc1: mmc at 01c10000 {
+ compatible = "allwinner,sun5i-a13-mmc";
+ reg = <0x01c10000 0x1000>;
+ clocks = <&ahb_gates 9>, <&mmc1_clk>;
+ clock-names = "ahb", "mod";
+ interrupts = <0 33 4>;
+ bus-width = <4>;
+ status = "disabled";
+ };
+
+ mmc2: mmc at 01c11000 {
+ compatible = "allwinner,sun5i-a13-mmc";
+ reg = <0x01c11000 0x1000>;
+ clocks = <&ahb_gates 10>, <&mmc2_clk>;
+ clock-names = "ahb", "mod";
+ interrupts = <0 34 4>;
+ bus-width = <4>;
+ status = "disabled";
+ };
+
+ mmc3: mmc at 01c12000 {
+ compatible = "allwinner,sun5i-a13-mmc";
+ reg = <0x01c12000 0x1000>;
+ clocks = <&ahb_gates 11>, <&mmc3_clk>;
+ clock-names = "ahb", "mod";
+ interrupts = <0 35 4>;
+ bus-width = <4>;
+ status = "disabled";
+ };
+
pio: pinctrl at 01c20800 {
compatible = "allwinner,sun7i-a20-pinctrl";
reg = <0x01c20800 0x400>;
@@ -432,6 +472,27 @@
allwinner,drive = <0>;
allwinner,pull = <0>;
};
+
+ mmc0_pins_a: mmc0 at 0 {
+ allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5";
+ allwinner,function = "mmc0";
+ allwinner,drive = <3>;
+ allwinner,pull = <0>;
+ };
+
+ mmc0_cd_pin_reference_design: mmc0_cd_pin at 0 {
+ allwinner,pins = "PH1";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <0>;
+ allwinner,pull = <0>;
+ };
+
+ mmc3_pins_a: mmc3 at 0 {
+ allwinner,pins = "PI4","PI5","PI6","PI7","PI8","PI9";
+ allwinner,function = "mmc3";
+ allwinner,drive = <3>;
+ allwinner,pull = <0>;
+ };
};
timer at 01c20c00 {
next prev parent reply other threads:[~2014-02-05 13:54 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-02-05 13:53 [PATCH v3 0/7] ARM: sunxi: Add driver for SD/MMC hosts found on allwinner sunxi SOCs David Lanzendörfer
2014-02-05 13:53 ` [PATCH v3 1/7] clk: sunxi: factors: automatic reparenting support David Lanzendörfer
2014-02-05 13:53 ` [PATCH v3 2/7] clk: sunxi: Implement MMC phase control David Lanzendörfer
2014-02-05 13:54 ` [PATCH v3 3/7] ARM: sunxi: clk: export clk_sunxi_mmc_phase_control David Lanzendörfer
2014-02-05 13:54 ` [PATCH v3 4/7] ARM: sunxi: Add driver for SD/MMC hosts found on Allwinner sunxi SoCs David Lanzendörfer
2014-02-05 13:54 ` David Lanzendörfer [this message]
2014-02-05 13:54 ` [PATCH v3 6/7] ARM: dts: sun4i: Add support for mmc David Lanzendörfer
2014-02-05 13:55 ` [PATCH v3 7/7] ARM: dts: sun5i: " David Lanzendörfer
2014-02-05 17:17 ` [PATCH v3 0/7] ARM: sunxi: Add driver for SD/MMC hosts found on allwinner sunxi SOCs David Lanzendörfer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140205135436.3027.8596.stgit@dizzy-6.o2s.ch \
--to=david.lanzendoerfer@o2s.ch \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).