* emmc on imx6 sabresd
@ 2014-01-29 10:03 Philippe De Muyter
2014-02-06 7:57 ` Shawn Guo
0 siblings, 1 reply; 3+ messages in thread
From: Philippe De Muyter @ 2014-01-29 10:03 UTC (permalink / raw)
To: linux-arm-kernel
Hi Shawn,
I try to use the emmc on my sabresd board and on a similar custom board
using 3.13, and I have just discovered by reading Internet that it was
not supported up to some weeks ago. Is there a git tree somewhere that
has a branch containing 3.13 or linux-next and all the fixes for emmc on
sabresd ?
TIA
--
Philippe De Muyter +32 2 6101532 Macq SA rue de l'Aeronef 2 B-1140 Bruxelles
^ permalink raw reply [flat|nested] 3+ messages in thread
* emmc on imx6 sabresd
2014-01-29 10:03 emmc on imx6 sabresd Philippe De Muyter
@ 2014-02-06 7:57 ` Shawn Guo
2014-02-07 10:51 ` Philippe De Muyter
0 siblings, 1 reply; 3+ messages in thread
From: Shawn Guo @ 2014-02-06 7:57 UTC (permalink / raw)
To: linux-arm-kernel
On Wed, Jan 29, 2014 at 11:03:21AM +0100, Philippe De Muyter wrote:
> Hi Shawn,
>
> I try to use the emmc on my sabresd board and on a similar custom board
> using 3.13, and I have just discovered by reading Internet that it was
> not supported up to some weeks ago. Is there a git tree somewhere that
> has a branch containing 3.13 or linux-next and all the fixes for emmc on
> sabresd ?
I think it will just work if you apply the patch [1] on top of
v3.14-rc1.
Shawn
[1] http://www.spinics.net/lists/linux-mmc/msg23039.html
^ permalink raw reply [flat|nested] 3+ messages in thread
* emmc on imx6 sabresd
2014-02-06 7:57 ` Shawn Guo
@ 2014-02-07 10:51 ` Philippe De Muyter
0 siblings, 0 replies; 3+ messages in thread
From: Philippe De Muyter @ 2014-02-07 10:51 UTC (permalink / raw)
To: linux-arm-kernel
Thanks Shawn,
On Thu, Feb 06, 2014 at 03:57:50PM +0800, Shawn Guo wrote:
> On Wed, Jan 29, 2014 at 11:03:21AM +0100, Philippe De Muyter wrote:
> > Hi Shawn,
> >
> > I try to use the emmc on my sabresd board and on a similar custom board
> > using 3.13, and I have just discovered by reading Internet that it was
> > not supported up to some weeks ago. Is there a git tree somewhere that
> > has a branch containing 3.13 or linux-next and all the fixes for emmc on
> > sabresd ?
>
> I think it will just work if you apply the patch [1] on top of
> v3.14-rc1.
>
> Shawn
>
> [1] http://www.spinics.net/lists/linux-mmc/msg23039.html
As I could not wait till then, I cloned the cjb's mmc tree, extracted the needed
patches using 'git format-patch', and applied them to my (then) v3.13-rc8 tree
using 'git am'. I can confirm that that works perfectly.
Philippe
--
Philippe De Muyter +32 2 6101532 Macq SA rue de l'Aeronef 2 B-1140 Bruxelles
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2014-02-07 10:51 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-01-29 10:03 emmc on imx6 sabresd Philippe De Muyter
2014-02-06 7:57 ` Shawn Guo
2014-02-07 10:51 ` Philippe De Muyter
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox