From mboxrd@z Thu Jan 1 00:00:00 1970 From: jason@lakedaemon.net (Jason Cooper) Date: Fri, 7 Feb 2014 10:09:58 -0500 Subject: [PATCH] i2c: mv64xxx: Fix locked bus when offload is selected but not used on a message In-Reply-To: <1391770588-1344-1-git-send-email-gregory.clement@free-electrons.com> References: <1391770588-1344-1-git-send-email-gregory.clement@free-electrons.com> Message-ID: <20140207150958.GY8533@titan.lakedaemon.net> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Fri, Feb 07, 2014 at 11:55:54AM +0100, Gregory CLEMENT wrote: > Offload can be used only on regular transactions and for 1 to byte > transfers. In the other cases we switch back to usual work flow. > > In this case we need to call mv64xxx_i2c_prepare_for_io() as this > function is not used when we try to use offloading. > > This commit adds this missing call when offloading have failed in the > MV64XXX_I2C_ACTION_OFFLOAD_SEND_START case. > > This fix the timeout seen when the the i2c driver try to access an > address where the device is absent on the Armada XP bases board. > > Cc: stable at vger.kernel.org # v3.12+ > Fixes: 930ab3d403ae (i2c: mv64xxx: Add I2C Transaction Generator support) > > Signed-off-by: Gregory CLEMENT > --- > drivers/i2c/busses/i2c-mv64xxx.c | 9 ++++++++- > 1 file changed, 8 insertions(+), 1 deletion(-) I'd like to get a few tested-by's on this before this is pushed. We've had quite a bit of fixes this round :( Please test both multi_v7 and mvebu defconfigs. Kevin, I know you're busy with a lot more than us, but if you could confirm that this fixes the bus hangs you reported, that would be great. thx, Jason. > > diff --git a/drivers/i2c/busses/i2c-mv64xxx.c b/drivers/i2c/busses/i2c-mv64xxx.c > index b8c5187b9ee0..a1700c62d955 100644 > --- a/drivers/i2c/busses/i2c-mv64xxx.c > +++ b/drivers/i2c/busses/i2c-mv64xxx.c > @@ -461,8 +461,15 @@ mv64xxx_i2c_do_action(struct mv64xxx_i2c_data *drv_data) > case MV64XXX_I2C_ACTION_OFFLOAD_SEND_START: > if (!mv64xxx_i2c_offload_msg(drv_data)) > break; > - else > + else { > drv_data->action = MV64XXX_I2C_ACTION_SEND_START; > + /* > + * Switch to the standard path, so we finally need to > + * prepare the io that have not been done in > + * mv64xxx_i2c_execute_msg > + */ > + mv64xxx_i2c_prepare_for_io(drv_data, drv_data->msgs); > + } > /* FALLTHRU */ > case MV64XXX_I2C_ACTION_SEND_START: > writel(drv_data->cntl_bits | MV64XXX_I2C_REG_CONTROL_START, > -- > 1.8.1.2 >