From: david.lanzendoerfer@o2s.ch (David Lanzendörfer)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v7 6/8] ARM: dts: sun4i: Add support for mmc
Date: Mon, 17 Feb 2014 11:02:48 +0100 [thread overview]
Message-ID: <20140217100248.15040.18801.stgit@pagira.o2s.ch> (raw)
In-Reply-To: <20140217095907.15040.81893.stgit@pagira.o2s.ch>
Signed-off-by: David Lanzend?rfer <david.lanzendoerfer@o2s.ch>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
arch/arm/boot/dts/sun4i-a10-a1000.dts | 8 ++++
arch/arm/boot/dts/sun4i-a10-cubieboard.dts | 8 ++++
arch/arm/boot/dts/sun4i-a10.dtsi | 54 ++++++++++++++++++++++++++++
3 files changed, 70 insertions(+)
diff --git a/arch/arm/boot/dts/sun4i-a10-a1000.dts b/arch/arm/boot/dts/sun4i-a10-a1000.dts
index d4b081d..a879ef3 100644
--- a/arch/arm/boot/dts/sun4i-a10-a1000.dts
+++ b/arch/arm/boot/dts/sun4i-a10-a1000.dts
@@ -35,6 +35,14 @@
};
};
+ mmc0: mmc at 01c0f000 {
+ pinctrl-names = "default", "default";
+ pinctrl-0 = <&mmc0_pins_a>;
+ pinctrl-1 = <&mmc0_cd_pin_reference_design>;
+ cd-gpios = <&pio 7 1 0>; /* PH1 */
+ status = "okay";
+ };
+
pinctrl at 01c20800 {
emac_power_pin_a1000: emac_power_pin at 0 {
allwinner,pins = "PH15";
diff --git a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
index b139ee6..20b976a 100644
--- a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
+++ b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
@@ -33,6 +33,14 @@
};
};
+ mmc0: mmc at 01c0f000 {
+ pinctrl-names = "default", "default";
+ pinctrl-0 = <&mmc0_pins_a>;
+ pinctrl-1 = <&mmc0_cd_pin_reference_design>;
+ cd-gpios = <&pio 7 1 0>; /* PH1 */
+ status = "okay";
+ };
+
pinctrl at 01c20800 {
led_pins_cubieboard: led_pins at 0 {
allwinner,pins = "PH20", "PH21";
diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi
index 9044c53..cd14961 100644
--- a/arch/arm/boot/dts/sun4i-a10.dtsi
+++ b/arch/arm/boot/dts/sun4i-a10.dtsi
@@ -330,6 +330,46 @@
#size-cells = <0>;
};
+ mmc0: mmc at 01c0f000 {
+ compatible = "allwinner,sun5i-a13-mmc";
+ reg = <0x01c0f000 0x1000>;
+ clocks = <&ahb_gates 8>, <&mmc0_clk>;
+ clock-names = "ahb", "mod";
+ interrupts = <32>;
+ bus-width = <4>;
+ status = "disabled";
+ };
+
+ mmc1: mmc at 01c10000 {
+ compatible = "allwinner,sun5i-a13-mmc";
+ reg = <0x01c10000 0x1000>;
+ clocks = <&ahb_gates 9>, <&mmc1_clk>;
+ clock-names = "ahb", "mod";
+ interrupts = <33>;
+ bus-width = <4>;
+ status = "disabled";
+ };
+
+ mmc2: mmc at 01c11000 {
+ compatible = "allwinner,sun5i-a13-mmc";
+ reg = <0x01c11000 0x1000>;
+ clocks = <&ahb_gates 10>, <&mmc2_clk>;
+ clock-names = "ahb", "mod";
+ interrupts = <34>;
+ bus-width = <4>;
+ status = "disabled";
+ };
+
+ mmc3: mmc at 01c12000 {
+ compatible = "allwinner,sun5i-a13-mmc";
+ reg = <0x01c12000 0x1000>;
+ clocks = <&ahb_gates 11>, <&mmc3_clk>;
+ clock-names = "ahb", "mod";
+ interrupts = <35>;
+ bus-width = <4>;
+ status = "disabled";
+ };
+
intc: interrupt-controller at 01c20400 {
compatible = "allwinner,sun4i-ic";
reg = <0x01c20400 0x400>;
@@ -400,6 +440,20 @@
allwinner,drive = <0>;
allwinner,pull = <0>;
};
+
+ mmc0_pins_a: mmc0 at 0 {
+ allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5";
+ allwinner,function = "mmc0";
+ allwinner,drive = <3>;
+ allwinner,pull = <0>;
+ };
+
+ mmc0_cd_pin_reference_design: mmc0_cd_pin at 0 {
+ allwinner,pins = "PH1";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <0>;
+ allwinner,pull = <1>;
+ };
};
timer at 01c20c00 {
next prev parent reply other threads:[~2014-02-17 10:02 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-02-17 10:02 [PATCH v7 0/8] ARM: sunxi: Add driver for SD/MMC hosts found on allwinner sunxi SOCs David Lanzendörfer
2014-02-17 10:02 ` [PATCH v7 1/8] clk: sunxi: factors: automatic reparenting support David Lanzendörfer
2014-02-18 14:05 ` Maxime Ripard
[not found] ` <20140319233945.21989.12073@quantum>
2014-03-20 9:47 ` Maxime Ripard
2014-02-17 10:02 ` [PATCH v7 2/8] clk: sunxi: Implement MMC phase control David Lanzendörfer
2014-02-18 14:15 ` Maxime Ripard
2014-02-19 5:21 ` Mike Turquette
2014-02-19 8:36 ` Maxime Ripard
2014-02-23 20:31 ` Mike Turquette
[not found] ` <20140602213134.10062.14293@quantum>
2014-06-05 16:01 ` Maxime Ripard
2014-02-17 10:02 ` [PATCH v7 3/8] ARM: sunxi: clk: export clk_sunxi_mmc_phase_control David Lanzendörfer
2014-02-18 14:17 ` Maxime Ripard
2014-02-17 10:02 ` [PATCH v7 4/8] ARM: sunxi: Add driver for SD/MMC hosts found on Allwinner sunxi SoCs David Lanzendörfer
2014-02-18 15:37 ` Maxime Ripard
2014-02-18 20:49 ` Hans de Goede
2014-02-19 9:46 ` Maxime Ripard
2014-02-19 12:14 ` Hans de Goede
2014-02-22 8:31 ` Maxime Ripard
2014-02-22 11:19 ` Hans de Goede
2014-02-17 10:02 ` [PATCH v7 5/8] ARM: dts: sun7i: Add support for mmc David Lanzendörfer
2014-02-18 14:22 ` Maxime Ripard
2014-02-18 15:10 ` Hans de Goede
2014-02-21 18:54 ` Maxime Ripard
2014-02-17 10:02 ` David Lanzendörfer [this message]
2014-02-17 10:02 ` [PATCH v7 7/8] ARM: dts: sun5i: " David Lanzendörfer
2014-02-17 10:03 ` [PATCH v7 8/8] ARM: sunxi: Add documentation for driver for SD/MMC hosts found on Allwinner sunxi SoCs David Lanzendörfer
2014-02-18 15:42 ` Maxime Ripard
2014-02-22 7:32 ` David Lanzendörfer
2014-02-22 8:37 ` Maxime Ripard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140217100248.15040.18801.stgit@pagira.o2s.ch \
--to=david.lanzendoerfer@o2s.ch \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).