[PATCH RFC 03/31] mmc: sdio_irq: rework sdio irq handling

[linux@arm.linux.org.uk (Russell King - ARM Linux)]

On Tue, Feb 18, 2014 at 10:40:33PM -0500, Nicolas Pitre wrote:
> On Tue, 18 Feb 2014, Russell King wrote:
> 
> > Rather than the SDIO support spawning it's own thread for handling card
> > interrupts, use the generic IRQ infrastructure for this, triggering it
> > from the host interface's interrupt handling directly.
> > 
> > This avoids a race between the parent thread waiting to receive an
> > interrupt response from the card, and the slow startup from the sdio
> > irq thread, which can occur as a result of high system load (eg, while
> > udev is running.)
> > 
> > Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
> > =-DO NOT APPLY-=
> >  drivers/mmc/core/sdio_irq.c | 41 +++++++++++++++++++++++++++++++----------
> >  include/linux/mmc/host.h    |  3 +++
> >  2 files changed, 34 insertions(+), 10 deletions(-)
> > 
> > diff --git a/drivers/mmc/core/sdio_irq.c b/drivers/mmc/core/sdio_irq.c
> > index aaa90460ed23..f23d73993dc6 100644
> > =-DO NOT APPLY-= a/drivers/mmc/core/sdio_irq.c
> > =+DO NOT APPLY+= b/drivers/mmc/core/sdio_irq.c
> > @@ -90,6 +90,15 @@ static int process_sdio_pending_irqs(struct mmc_host *host)
> >  	return ret;
> >  }
> >  
> > =+DO NOT APPLY+=void sdio_run_irqs(struct mmc_host *host)
> > =+DO NOT APPLY+={
> > =+DO NOT APPLY+=	mmc_claim_host(host);
> > =+DO NOT APPLY+=	host->sdio_irq_pending = true;
> > =+DO NOT APPLY+=	process_sdio_pending_irqs(host);
> > =+DO NOT APPLY+=	mmc_release_host(host);
> > =+DO NOT APPLY+=}
> > =+DO NOT APPLY+=EXPORT_SYMBOL_GPL(sdio_run_irqs);
> > =+DO NOT APPLY+=
> 
> Could you please dispense with those obnoxious "DO NOT APPLY" strings 
> all over the place?  That makes patch review very annoying.

Calm down.  That was a bug in the script, which has since been fixed.

-- 
FTTC broadband for 0.8mile line: 5.8Mbps down 500kbps up.  Estimation
in database were 13.1 to 19Mbit for a good line, about 7.5+ for a bad.
Estimate before purchase was "up to 13.2Mbit".