From mboxrd@z Thu Jan  1 00:00:00 1970
From: ezequiel.garcia@free-electrons.com (Ezequiel Garcia)
Date: Wed, 19 Feb 2014 21:50:28 -0300
Subject: [PATCH 0/2] Translate of PCI address without PCI enabled
In-Reply-To: <1392848096-17838-1-git-send-email-gregory.clement@free-electrons.com>
References: <1392848096-17838-1-git-send-email-gregory.clement@free-electrons.com>
Message-ID: <20140220005027.GA5721@localhost>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

On Wed, Feb 19, 2014 at 11:14:54PM +0100, Gregory CLEMENT wrote:
> Hello,
> 
> This patch set makes the use of the of PCI address translator less
> restrictive. At the end it will allow to use the mvebu_get_soc_id
> unconditionally.
> 
> The mvebu SoC (such as Kirkwood, Dove or Armada XP for instance) come
> with an IP of a PCI controller. The ID and the revision of a SoC are
> stored in the registers of this controller. Being able to get this
> information allows to deals with errata more dynamically.
> 
> To manage to read this information, we need to map the registers, and
> for this we need to use the of PCI translator which depend of the PCI
> support.
> 
> However there are mvebu board without any PCI devices, and where
> selecting the PCI support would be useless.
> 
> Moreover translating an address from a PCI node of the device-tree
> into a CPU physical address doesn't require the core PCI
> support. Those translations are just related to the device tree
> itself.
> 
> The 1st patch introduces a new config symbol: OF_ADDRESS_PCI, which
> will be selected as soon as PCI will be selected, so we remains in the
> same situation the current code. It should go to the of tree.
> 
> The 2nd patch selects OF_ADDRESS_PCI as soon as ARCH_MVEBU will be
> selected. This will make mvebu_get_soc_id available even without the
> PCI support. It should go to the mvebu tree.
> 
> Thanks,
> 
> Gregory CLEMENT (2):
>   of: Allows to use the PCI translator without the PCI core
>   ARM: mvebu: Allows to get the SoC ID even without PCI enabled
> 
>  arch/arm/mach-mvebu/Kconfig | 1 +
>  drivers/of/Kconfig          | 4 ++++
>  drivers/of/address.c        | 8 +++++---
>  3 files changed, 10 insertions(+), 3 deletions(-)
> 
> -- 
> 1.8.1.2
> 

On XP GP and CONFIG_PCI=n, without the patches I get this:

  mvebu-soc-id: cannot map registers

and after applying the patches I have:

  mvebu-soc-id: MVEBU SoC ID=0x7846, Rev=0x2

Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Reviewed-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>

Thanks for taking care of this.
-- 
Ezequiel Garc?a, Free Electrons
Embedded Linux, Kernel and Android Engineering
http://free-electrons.com