[PATCH v6 17/18] ARM: sun4i: dt: Add ahci / sata support

[maxime.ripard@free-electrons.com (Maxime Ripard)]

On Sat, Feb 22, 2014 at 11:09:25AM +0100, Hans de Goede wrote:
> Hi Maxime,
> 
> On 02/21/2014 07:15 PM, Maxime Ripard wrote:
> >Hi Hans,
> >
> >On Wed, Feb 19, 2014 at 01:01:59PM +0100, Hans de Goede wrote:
> >>From: Oliver Schinagl <oliver@schinagl.nl>
> >>
> >>This patch adds sunxi sata support to A10 boards that have such a connector.
> >>Some boards also feature a regulator via a GPIO and support for this is also
> >>added.
> >>
> >>Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
> >>Signed-off-by: Hans de Goede <hdegoede@redhat.com>
> >>---
> >>  arch/arm/boot/dts/sun4i-a10-a1000.dts      |  4 ++++
> >>  arch/arm/boot/dts/sun4i-a10-cubieboard.dts |  6 +++++
> >>  arch/arm/boot/dts/sun4i-a10.dtsi           |  8 +++++++
> >>  arch/arm/boot/dts/sunxi-ahci-reg.dtsi      | 36 ++++++++++++++++++++++++++++++
> >>  4 files changed, 54 insertions(+)
> >>  create mode 100644 arch/arm/boot/dts/sunxi-ahci-reg.dtsi
> >>
> >>diff --git a/arch/arm/boot/dts/sun4i-a10-a1000.dts b/arch/arm/boot/dts/sun4i-a10-a1000.dts
> >>index cbd2e13..d6ec839 100644
> >>--- a/arch/arm/boot/dts/sun4i-a10-a1000.dts
> >>+++ b/arch/arm/boot/dts/sun4i-a10-a1000.dts
> >>@@ -35,6 +35,10 @@
> >>  			};
> >>  		};
> >>
> >>+		ahci: sata at 01c18000 {
> >>+			status = "okay";
> >>+		};
> >>+
> >>  		pinctrl at 01c20800 {
> >>  			emac_power_pin_a1000: emac_power_pin at 0 {
> >>  				allwinner,pins = "PH15";
> >>diff --git a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
> >>index b139ee6..6df237d8 100644
> >>--- a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
> >>+++ b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
> >>@@ -12,6 +12,7 @@
> >>
> >>  /dts-v1/;
> >>  /include/ "sun4i-a10.dtsi"
> >>+/include/ "sunxi-ahci-reg.dtsi"
> >>
> >>  / {
> >>  	model = "Cubietech Cubieboard";
> >>@@ -33,6 +34,11 @@
> >>  			};
> >>  		};
> >>
> >>+		ahci: sata at 01c18000 {
> >>+			target-supply = <&reg_ahci_5v>;
> >>+			status = "okay";
> >>+		};
> >>+
> >>  		pinctrl at 01c20800 {
> >>  			led_pins_cubieboard: led_pins at 0 {
> >>  				allwinner,pins = "PH20", "PH21";
> >>diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi
> >>index 336dbec..454077a 100644
> >>--- a/arch/arm/boot/dts/sun4i-a10.dtsi
> >>+++ b/arch/arm/boot/dts/sun4i-a10.dtsi
> >>@@ -338,6 +338,14 @@
> >>  			#size-cells = <0>;
> >>  		};
> >>
> >>+		ahci: sata at 01c18000 {
> >>+			compatible = "allwinner,sun4i-a10-ahci";
> >>+			reg = <0x01c18000 0x1000>;
> >>+			interrupts = <56>;
> >>+			clocks = <&pll6 0>, <&ahb_gates 25>;
> >>+			status = "disabled";
> >>+		};
> >>+
> >>  		intc: interrupt-controller at 01c20400 {
> >>  			compatible = "allwinner,sun4i-ic";
> >>  			reg = <0x01c20400 0x400>;
> >>diff --git a/arch/arm/boot/dts/sunxi-ahci-reg.dtsi b/arch/arm/boot/dts/sunxi-ahci-reg.dtsi
> >>new file mode 100644
> >>index 0000000..7072af1
> >>--- /dev/null
> >>+++ b/arch/arm/boot/dts/sunxi-ahci-reg.dtsi
> >>@@ -0,0 +1,36 @@
> >>+/*
> >>+ * sunxi boards sata target power supply common code
> >
> >
> >Since IIRC we have pretty much the same needs for the USB, can't we
> >just drop the SATA specific mention and use it as the common DTSI for
> >the usual regulators?
> 
> On most boards with sata, there will also be 1 or 2 usb regulators,
> so we need differently named regulator nodes for all 3 of ahci,
> usb1 and usb2 vbus. On some boards how ever we may only need the
> usb regulators.

Yes, obviously...

> So if you look in my current personal sunxi-devel tree you will see
> separate dtsi files for both ahci and usb regulators,

And this is precisely what I don't understand. Why do you *need*
different DTSI files. If there's common regulators, that are used on
most boards, fine, create a common regulators files. But why do you
have to create a DTSI to define only one regulator.

> another advantage of having these separate is that the gpio controlling
> the regulator can be pre-populated with the reference design gpio which
> is used in most boards, so that the ahci specific code in the dts
> becomes only the ahci: sata at ... node.

I understand very well the advantages of what having a reference
regulators bring. What I don't understand is the benefits of having
"topics" regulators DTSI.

Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140222/216c9a7e/attachment.sig>