* [PATCH v2] ARM: dts: Leave sdio1 as disabled on bcm28155-ap
@ 2014-02-04 23:27 Tim Kryger
2014-02-24 20:11 ` Matt Porter
0 siblings, 1 reply; 2+ messages in thread
From: Tim Kryger @ 2014-02-04 23:27 UTC (permalink / raw)
To: linux-arm-kernel
The sdio1 interface pins are routed to an unpopulated daughter card
connector on the bcm28155-ap board. Thus there is no need to mark
this interface as enabled.
Signed-off-by: Tim Kryger <tim.kryger@linaro.org>
Reviewed-by: Matt Porter <matt.porter@linaro.org>
---
Changes since v1:
- Rebased on v3.14-rc1
arch/arm/boot/dts/bcm28155-ap.dts | 5 -----
1 file changed, 5 deletions(-)
diff --git a/arch/arm/boot/dts/bcm28155-ap.dts b/arch/arm/boot/dts/bcm28155-ap.dts
index 5ff2382..3604554 100644
--- a/arch/arm/boot/dts/bcm28155-ap.dts
+++ b/arch/arm/boot/dts/bcm28155-ap.dts
@@ -49,11 +49,6 @@
clock-frequency = <400000>;
};
- sdio1: sdio at 3f180000 {
- max-frequency = <48000000>;
- status = "okay";
- };
-
sdio2: sdio at 3f190000 {
non-removable;
max-frequency = <48000000>;
--
1.8.0.1
^ permalink raw reply related [flat|nested] 2+ messages in thread
end of thread, other threads:[~2014-02-24 20:11 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-02-04 23:27 [PATCH v2] ARM: dts: Leave sdio1 as disabled on bcm28155-ap Tim Kryger
2014-02-24 20:11 ` Matt Porter
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).