From mboxrd@z Thu Jan  1 00:00:00 1970
From: joshc@codeaurora.org (Josh Cartwright)
Date: Wed, 26 Feb 2014 18:09:19 -0600
Subject: [PATCH v3 2/9] Input: pmic8xxx-keypad - Migrate to devm_* APIs
In-Reply-To: <1393441562-685-3-git-send-email-sboyd@codeaurora.org>
References: <1393441562-685-1-git-send-email-sboyd@codeaurora.org>
 <1393441562-685-3-git-send-email-sboyd@codeaurora.org>
Message-ID: <20140227000919.GE18563@joshc.qualcomm.com>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

On Wed, Feb 26, 2014 at 11:05:55AM -0800, Stephen Boyd wrote:
> Simplify the error paths and reduce the lines of code in this
> driver by using the devm_* APIs.
> 
> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
> ---
>  drivers/input/keyboard/pmic8xxx-keypad.c | 62 +++++++++-----------------------
>  1 file changed, 17 insertions(+), 45 deletions(-)
> 
> diff --git a/drivers/input/keyboard/pmic8xxx-keypad.c b/drivers/input/keyboard/pmic8xxx-keypad.c
> index 2c9f19ac35ea..4e6bfbf94ae4 100644
> --- a/drivers/input/keyboard/pmic8xxx-keypad.c
> +++ b/drivers/input/keyboard/pmic8xxx-keypad.c
[..]
> @@ -634,7 +629,7 @@ static int pmic8xxx_kp_probe(struct platform_device *pdev)
>  					kp->keycodes, kp->input);
>  	if (rc) {
>  		dev_err(&pdev->dev, "failed to build keymap\n");
> -		goto err_get_irq;
> +		return rc;
>  	}
>  
>  	if (pdata->rep)
> @@ -650,7 +645,7 @@ static int pmic8xxx_kp_probe(struct platform_device *pdev)
>  	rc = pmic8xxx_kpd_init(kp);
>  	if (rc < 0) {
>  		dev_err(&pdev->dev, "unable to initialize keypad controller\n");
> -		goto err_get_irq;
> +		return rc;
>  	}
>  
>  	rc = pmic8xxx_kp_config_gpio(pdata->cols_gpio_start,
> @@ -667,24 +662,26 @@ static int pmic8xxx_kp_probe(struct platform_device *pdev)
>  		goto err_gpio_config;

See below.

>  	}
>  
> -	rc = request_any_context_irq(kp->key_sense_irq, pmic8xxx_kp_irq,
> -				 IRQF_TRIGGER_RISING, "pmic-keypad", kp);
> +	rc = devm_request_any_context_irq(&pdev->dev, kp->key_sense_irq,
> +			pmic8xxx_kp_irq, IRQF_TRIGGER_RISING, "pmic-keypad",
> +			kp);
>  	if (rc < 0) {
>  		dev_err(&pdev->dev, "failed to request keypad sense irq\n");
> -		goto err_get_irq;
> +		return rc;
>  	}
>  
> -	rc = request_any_context_irq(kp->key_stuck_irq, pmic8xxx_kp_stuck_irq,
> -				 IRQF_TRIGGER_RISING, "pmic-keypad-stuck", kp);
> +	rc = devm_request_any_context_irq(&pdev->dev, kp->key_stuck_irq,
> +			pmic8xxx_kp_stuck_irq, IRQF_TRIGGER_RISING,
> +			"pmic-keypad-stuck", kp);
>  	if (rc < 0) {
>  		dev_err(&pdev->dev, "failed to request keypad stuck irq\n");
> -		goto err_req_stuck_irq;
> +		return rc;
>  	}
>  
>  	rc = pmic8xxx_kp_read_u8(kp, &ctrl_val, KEYP_CTRL);
>  	if (rc < 0) {
>  		dev_err(&pdev->dev, "failed to read KEYP_CTRL register\n");
> -		goto err_pmic_reg_read;
> +		return rc;
>  	}
>  
>  	kp->ctrl_reg = ctrl_val;
> @@ -692,36 +689,12 @@ static int pmic8xxx_kp_probe(struct platform_device *pdev)
>  	rc = input_register_device(kp->input);
>  	if (rc < 0) {
>  		dev_err(&pdev->dev, "unable to register keypad input device\n");
> -		goto err_pmic_reg_read;
> +		return rc;
>  	}
>  
>  	device_init_wakeup(&pdev->dev, pdata->wakeup);
>  
>  	return 0;
> -
> -err_pmic_reg_read:
> -	free_irq(kp->key_stuck_irq, kp);
> -err_req_stuck_irq:
> -	free_irq(kp->key_sense_irq, kp);
> -err_gpio_config:

You're removing this label, even though it's still used above. :(

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
hosted by The Linux Foundation