From: balbi@ti.com (Felipe Balbi)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v5 0/6] Make dwc3 use Generic PHY Framework
Date: Mon, 3 Mar 2014 10:40:51 -0600 [thread overview]
Message-ID: <20140303164051.GB10987@saruman.home> (raw)
In-Reply-To: <1393846695-14644-1-git-send-email-kishon@ti.com>
Hi,
On Mon, Mar 03, 2014 at 05:08:09PM +0530, Kishon Vijay Abraham I wrote:
> Added support for optional PHY in dwc3 as not all SoCs having PHYs for DWC3
> should be programmed. While this can be considered as a temporary fix,
> a long term solution would be to add 'nop' PHY for platforms that does
> not have programmable PHY.
> Adapted DWC3 and USB3 PHY to use Generic PHY framework. Also changed the
> name of USB3 PHY driver to PIPE3 PHY driver since the same driver has to
> be used for SATA and PCIE too.
>
> Changes from v4: (sending the entire patch series again)
> * check the return values of phy_init and phy_power_on
> * print errors if power_on or power_off of PHY fails.
>
> Changes from v3: (Sent only adapt dwc3 core to use Generic PHY Framework)
> * avoided using quirks and rely on the return values of PHY APIs to find the
> presence of PHY.
>
> Changes from v2:
> * added a couple of fixes. One is invoking phy_resume after phy_init and the
> other is power off phy in error patch
> * used quirks to identify if a particular platform does not have PHYs
> * removed using separate header for pipe3 driver and also removed all referencs
> to SATA and PCIe in pipe3 driver since it's not yet adapted for those drivers.
>
> Changes from v1:
> * The logic in which the driver detects the presence of PHYs has changed.
> * patch ordering has changed
> * udelay is replaced with usleep_range
> * A patch to remove set_suspend callback which was deferred from Generic
> PHY Framework series has been included.
>
> Kishon Vijay Abraham I (6):
> usb: dwc3: core: support optional PHYs
> usb: dwc3: adapt dwc3 core to use Generic PHY Framework
> drivers: phy: usb3/pipe3: Adapt pipe3 driver to Generic PHY Framework
> usb: phy: omap-usb2: remove *set_suspend* callback from omap-usb2
> phy: omap-usb2: move omap_usb.h from linux/usb/ to linux/phy/
> arm/dts: added dt properties to adapt to the new phy framwork
patches 1 and 2 are in my testing/next, I guess 3,4,5 and 6 have no
direct dependency on those, right ?
--
balbi
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140303/b157ecf7/attachment-0001.sig>
next prev parent reply other threads:[~2014-03-03 16:40 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-03-03 11:38 [PATCH v5 0/6] Make dwc3 use Generic PHY Framework Kishon Vijay Abraham I
2014-03-03 11:38 ` [PATCH v5 1/6] usb: dwc3: core: support optional PHYs Kishon Vijay Abraham I
2014-03-03 11:38 ` [PATCH v5 2/6] usb: dwc3: adapt dwc3 core to use Generic PHY Framework Kishon Vijay Abraham I
2014-03-05 14:43 ` Roger Quadros
2014-03-05 14:47 ` Kishon Vijay Abraham I
2014-03-05 15:24 ` Roger Quadros
2014-03-03 11:38 ` [PATCH v5 3/6] drivers: phy: usb3/pipe3: Adapt pipe3 driver to " Kishon Vijay Abraham I
2014-03-06 9:30 ` Kishon Vijay Abraham I
2014-03-03 11:38 ` [PATCH v5 4/6] usb: phy: omap-usb2: remove *set_suspend* callback from omap-usb2 Kishon Vijay Abraham I
2014-03-03 11:38 ` [PATCH v5 5/6] phy: omap-usb2: move omap_usb.h from linux/usb/ to linux/phy/ Kishon Vijay Abraham I
2014-03-03 11:38 ` [PATCH v5 6/6] arm/dts: added dt properties to adapt to the new phy framwork Kishon Vijay Abraham I
2014-03-05 12:42 ` Kishon Vijay Abraham I
2014-03-05 19:40 ` Tony Lindgren
2014-03-03 12:21 ` [PATCH v5 0/6] Make dwc3 use Generic PHY Framework Roger Quadros
2014-03-03 12:36 ` Kishon Vijay Abraham I
2014-03-03 16:40 ` Felipe Balbi [this message]
2014-03-04 13:31 ` Kishon Vijay Abraham I
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140303164051.GB10987@saruman.home \
--to=balbi@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).