* [RESEND Patch 0/9] dts pending patches for TI omap
2014-03-03 14:50 [RESEND Patch 0/9] dts pending patches for TI omap Mugunthan V N
@ 2014-03-03 14:50 ` Mugunthan V N
2014-03-03 14:50 ` [RESEND Patch 1/9] ARM: dts: am437x gp-evm: add sd card dt nodes Mugunthan V N
` (9 subsequent siblings)
10 siblings, 0 replies; 13+ messages in thread
From: Mugunthan V N @ 2014-03-03 14:50 UTC (permalink / raw)
To: linux-arm-kernel
Benoit/Tony
Here I am send all the pending patches that can go into 3.15 merge window,
all the patches were already posted to mailing list and has beed reviewed.
Here I am rebasing the patches on top of
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap.git omap-for-v3.15/dt
and fixed all the merge conflicts.
Here I am pasting the mail archieve for the patches series
* Add ABB device nodes
http://linux-kernel.2935.n7.nabble.com/PATCH-0-4-ARM-dts-OMAP3630-Add-ABB-device-nodes-td794852.html
* MMC hot plug support
http://mail.blameitonlove.com/lists/linux-omap/msg101933.html
Dropped [PATCH 2/3] ARM: dts: am335x-evmsk: add SD card hotplug support as this
is already merged with commit id 29ea5efb0bb612d352aa360de26e2095cb230e4a
* DRA7 Cross bar DTS patches
Cross bar driver has been pulled for next merge, so the dts patches can also
be pulled for next merge window.
Here is the pull request for the same set.
The following changes since commit f777ba1780584b100ab9664cc06d04f3bb273a84:
Merge tag 'for_3.15/dts_signed' of git://git.kernel.org/pub/scm/linux/kernel/git/bcousson/linux-omap-dt into omap-for-v3.15/dt (2014-03-02 14:22:03 -0800)
are available in the git repository at:
git://git.ti.com/~mugunthanvnm/ti-linux-kernel/linux.git omapdt-for-3.15
for you to fetch changes up to 5f78b45aa45c5b2c4de895c3b0740fda4684dae4:
ARM: DTS: DRA7: Add routable-irqs property for gic node (2014-03-03 19:53:25 +0530)
----------------------------------------------------------------
Andrii.Tseglytskyi (2):
ARM: dts: OMAP36xx: Add device node for ABB
ARM: dts: OMAP4: Add device nodes for ABB
Balaji T K (3):
ARM: dts: am437x gp-evm: add sd card dt nodes
ARM: dts: am335x-evm: add SD card hotplug support
ARM: dts: am43x-epos-evm: add SD card hotplug support
Nishanth Menon (1):
ARM: dts: DRA7: Add device nodes for ABB
Sricharan R (3):
ARM: DTS: DRA7: Add crossbar device binding
ARM: DTS: DRA7: Replace peripheral interrupt numbers with crossbar inputs
ARM: DTS: DRA7: Add routable-irqs property for gic node
arch/arm/boot/dts/am335x-evm.dts | 9 ++
arch/arm/boot/dts/am4372.dtsi | 1 +
arch/arm/boot/dts/am437x-gp-evm.dts | 27 +++++
arch/arm/boot/dts/am43x-epos-evm.dts | 9 ++
arch/arm/boot/dts/dra7.dtsi | 227 ++++++++++++++++++++++++++++-------
arch/arm/boot/dts/omap36xx.dtsi | 20 +++
arch/arm/boot/dts/omap4.dtsi | 26 ++++
arch/arm/boot/dts/omap443x.dtsi | 26 ++++
arch/arm/boot/dts/omap4460.dtsi | 37 ++++++
9 files changed, 339 insertions(+), 43 deletions(-)
--
1.9.0
^ permalink raw reply [flat|nested] 13+ messages in thread* [RESEND Patch 1/9] ARM: dts: am437x gp-evm: add sd card dt nodes
2014-03-03 14:50 [RESEND Patch 0/9] dts pending patches for TI omap Mugunthan V N
2014-03-03 14:50 ` Mugunthan V N
@ 2014-03-03 14:50 ` Mugunthan V N
2014-03-03 14:50 ` [RESEND Patch 2/9] ARM: dts: am335x-evm: add SD card hotplug support Mugunthan V N
` (8 subsequent siblings)
10 siblings, 0 replies; 13+ messages in thread
From: Mugunthan V N @ 2014-03-03 14:50 UTC (permalink / raw)
To: linux-arm-kernel
From: Balaji T K <balajitk@ti.com>
enable sd card slot on am437x-gp-evm
Signed-off-by: Balaji T K <balajitk@ti.com>
Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
---
arch/arm/boot/dts/am437x-gp-evm.dts | 27 +++++++++++++++++++++++++++
1 file changed, 27 insertions(+)
diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts
index 4eb72b8..df8798e 100644
--- a/arch/arm/boot/dts/am437x-gp-evm.dts
+++ b/arch/arm/boot/dts/am437x-gp-evm.dts
@@ -19,6 +19,14 @@
model = "TI AM437x GP EVM";
compatible = "ti,am437x-gp-evm","ti,am4372","ti,am43";
+ vmmcsd_fixed: fixedregulator-sd {
+ compatible = "regulator-fixed";
+ regulator-name = "vmmcsd_fixed";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ enable-active-high;
+ };
+
backlight {
compatible = "pwm-backlight";
pwms = <&ecap0 0 50000 PWM_POLARITY_INVERTED>;
@@ -62,6 +70,12 @@
>;
};
+ mmc1_pins: pinmux_mmc1_pins {
+ pinctrl-single,pins = <
+ 0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
+ >;
+ };
+
ecap0_pins: backlight_pins {
pinctrl-single,pins = <
0x164 MUX_MODE0 /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */
@@ -91,6 +105,10 @@
pinctrl-0 = <&ecap0_pins>;
};
+&gpio0 {
+ status = "okay";
+};
+
&gpio3 {
status = "okay";
};
@@ -98,3 +116,12 @@
&gpio4 {
status = "okay";
};
+
+&mmc1 {
+ status = "okay";
+ vmmc-supply = <&vmmcsd_fixed>;
+ bus-width = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins>;
+ cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+};
--
1.9.0
^ permalink raw reply related [flat|nested] 13+ messages in thread* [RESEND Patch 2/9] ARM: dts: am335x-evm: add SD card hotplug support
2014-03-03 14:50 [RESEND Patch 0/9] dts pending patches for TI omap Mugunthan V N
2014-03-03 14:50 ` Mugunthan V N
2014-03-03 14:50 ` [RESEND Patch 1/9] ARM: dts: am437x gp-evm: add sd card dt nodes Mugunthan V N
@ 2014-03-03 14:50 ` Mugunthan V N
2014-03-03 14:50 ` [RESEND Patch 3/9] ARM: dts: am43x-epos-evm: " Mugunthan V N
` (7 subsequent siblings)
10 siblings, 0 replies; 13+ messages in thread
From: Mugunthan V N @ 2014-03-03 14:50 UTC (permalink / raw)
To: linux-arm-kernel
From: Balaji T K <balajitk@ti.com>
Add card detect gpio for SD card slot
Signed-off-by: Balaji T K <balajitk@ti.com>
Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
---
arch/arm/boot/dts/am335x-evm.dts | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
index 07d61bb..28ae040 100644
--- a/arch/arm/boot/dts/am335x-evm.dts
+++ b/arch/arm/boot/dts/am335x-evm.dts
@@ -260,6 +260,12 @@
>;
};
+ mmc1_pins: pinmux_mmc1_pins {
+ pinctrl-single,pins = <
+ 0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
+ >;
+ };
+
lcd_pins_s0: lcd_pins_s0 {
pinctrl-single,pins = <
0x20 0x01 /* gpmc_ad8.lcd_data16, OUTPUT | MODE1 */
@@ -644,6 +650,9 @@
status = "okay";
vmmc-supply = <&vmmc_reg>;
bus-width = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins>;
+ cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
};
&sham {
--
1.9.0
^ permalink raw reply related [flat|nested] 13+ messages in thread* [RESEND Patch 3/9] ARM: dts: am43x-epos-evm: add SD card hotplug support
2014-03-03 14:50 [RESEND Patch 0/9] dts pending patches for TI omap Mugunthan V N
` (2 preceding siblings ...)
2014-03-03 14:50 ` [RESEND Patch 2/9] ARM: dts: am335x-evm: add SD card hotplug support Mugunthan V N
@ 2014-03-03 14:50 ` Mugunthan V N
2014-03-03 14:50 ` [RESEND Patch 4/9] ARM: dts: OMAP36xx: Add device node for ABB Mugunthan V N
` (6 subsequent siblings)
10 siblings, 0 replies; 13+ messages in thread
From: Mugunthan V N @ 2014-03-03 14:50 UTC (permalink / raw)
To: linux-arm-kernel
From: Balaji T K <balajitk@ti.com>
Add card detect gpio for SD card slot and include dt gpio header.
Signed-off-by: Balaji T K <balajitk@ti.com>
Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
---
arch/arm/boot/dts/am4372.dtsi | 1 +
arch/arm/boot/dts/am43x-epos-evm.dts | 9 +++++++++
2 files changed, 10 insertions(+)
diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
index b687869..36d523a 100644
--- a/arch/arm/boot/dts/am4372.dtsi
+++ b/arch/arm/boot/dts/am4372.dtsi
@@ -8,6 +8,7 @@
* kind, whether express or implied.
*/
+#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include "skeleton.dtsi"
diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts
index a3a53ce..167dbc8 100644
--- a/arch/arm/boot/dts/am43x-epos-evm.dts
+++ b/arch/arm/boot/dts/am43x-epos-evm.dts
@@ -132,6 +132,12 @@
0x19c (PIN_OUTPUT | MUX_MODE3) /* mcasp0_ahclkr.spi1_cs0 */
>;
};
+
+ mmc1_pins: pinmux_mmc1_pins {
+ pinctrl-single,pins = <
+ 0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
+ >;
+ };
};
matrix_keypad: matrix_keypad at 0 {
@@ -179,6 +185,9 @@
status = "okay";
vmmc-supply = <&vmmcsd_fixed>;
bus-width = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins>;
+ cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
};
&mac {
--
1.9.0
^ permalink raw reply related [flat|nested] 13+ messages in thread* [RESEND Patch 4/9] ARM: dts: OMAP36xx: Add device node for ABB
2014-03-03 14:50 [RESEND Patch 0/9] dts pending patches for TI omap Mugunthan V N
` (3 preceding siblings ...)
2014-03-03 14:50 ` [RESEND Patch 3/9] ARM: dts: am43x-epos-evm: " Mugunthan V N
@ 2014-03-03 14:50 ` Mugunthan V N
2014-03-03 14:50 ` [RESEND Patch 5/9] ARM: dts: OMAP4: Add device nodes " Mugunthan V N
` (5 subsequent siblings)
10 siblings, 0 replies; 13+ messages in thread
From: Mugunthan V N @ 2014-03-03 14:50 UTC (permalink / raw)
To: linux-arm-kernel
From: "Andrii.Tseglytskyi" <andrii.tseglytskyi@ti.com>
Add ABB device node for OMAP36xx family of devices. Data is based on
OMAP36XX Technical Reference Manual revision AB (Dec 2012).
[nm at ti.com: co-developer]
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Andrii.Tseglytskyi <andrii.tseglytskyi@ti.com>
Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
---
arch/arm/boot/dts/omap36xx.dtsi | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)
diff --git a/arch/arm/boot/dts/omap36xx.dtsi b/arch/arm/boot/dts/omap36xx.dtsi
index 7e8dee9..ba077cd 100644
--- a/arch/arm/boot/dts/omap36xx.dtsi
+++ b/arch/arm/boot/dts/omap36xx.dtsi
@@ -39,6 +39,26 @@
clock-frequency = <48000000>;
};
+ abb_mpu_iva: regulator-abb-mpu {
+ compatible = "ti,abb-v1";
+ regulator-name = "abb_mpu_iva";
+ #address-cell = <0>;
+ #size-cells = <0>;
+ reg = <0x483072f0 0x8>, <0x48306818 0x4>;
+ reg-names = "base-address", "int-address";
+ ti,tranxdone-status-mask = <0x4000000>;
+ clocks = <&sys_ck>;
+ ti,settling-time = <30>;
+ ti,clock-cycles = <8>;
+ ti,abb_info = <
+ /*uV ABB efuse rbb_m fbb_m vset_m*/
+ 1012500 0 0 0 0 0
+ 1200000 0 0 0 0 0
+ 1325000 0 0 0 0 0
+ 1375000 1 0 0 0 0
+ >;
+ };
+
omap3_pmx_core2: pinmux at 480025a0 {
compatible = "ti,omap3-padconf", "pinctrl-single";
reg = <0x480025a0 0x5c>;
--
1.9.0
^ permalink raw reply related [flat|nested] 13+ messages in thread* [RESEND Patch 5/9] ARM: dts: OMAP4: Add device nodes for ABB
2014-03-03 14:50 [RESEND Patch 0/9] dts pending patches for TI omap Mugunthan V N
` (4 preceding siblings ...)
2014-03-03 14:50 ` [RESEND Patch 4/9] ARM: dts: OMAP36xx: Add device node for ABB Mugunthan V N
@ 2014-03-03 14:50 ` Mugunthan V N
2014-03-03 14:50 ` [RESEND Patch 6/9] ARM: dts: DRA7: " Mugunthan V N
` (4 subsequent siblings)
10 siblings, 0 replies; 13+ messages in thread
From: Mugunthan V N @ 2014-03-03 14:50 UTC (permalink / raw)
To: linux-arm-kernel
From: "Andrii.Tseglytskyi" <andrii.tseglytskyi@ti.com>
Add ABB device nodes for OMAP443x family of devices. abb_iva is
populated, but disabled as it is not used on current OMAP443x family,
but the node is used on OMAP446x family. Data is based on OMAP443x
Technical Reference Manual revision AN (April 2013).
ABB device nodes for OMAP4460 device Data is based on OMAP4460
Technical Reference Manual revision Z (April 2013)
[nm at ti.com: co-developer]
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Andrii.Tseglytskyi <andrii.tseglytskyi@ti.com>
Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
---
arch/arm/boot/dts/omap4.dtsi | 26 ++++++++++++++++++++++++++
arch/arm/boot/dts/omap443x.dtsi | 26 ++++++++++++++++++++++++++
arch/arm/boot/dts/omap4460.dtsi | 37 +++++++++++++++++++++++++++++++++++++
3 files changed, 89 insertions(+)
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index afa23bc..c18f0fd 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -776,6 +776,32 @@
dmas = <&sdma 117>, <&sdma 116>;
dma-names = "tx", "rx";
};
+
+ abb_mpu: regulator-abb-mpu {
+ compatible = "ti,abb-v2";
+ regulator-name = "abb_mpu";
+ #address-cells = <0>;
+ #size-cells = <0>;
+ ti,tranxdone-status-mask = <0x80>;
+ clocks = <&sys_clkin_ck>;
+ ti,settling-time = <50>;
+ ti,clock-cycles = <16>;
+
+ status = "disabled";
+ };
+
+ abb_iva: regulator-abb-iva {
+ compatible = "ti,abb-v2";
+ regulator-name = "abb_iva";
+ #address-cells = <0>;
+ #size-cells = <0>;
+ ti,tranxdone-status-mask = <0x80000000>;
+ clocks = <&sys_clkin_ck>;
+ ti,settling-time = <50>;
+ ti,clock-cycles = <16>;
+
+ status = "disabled";
+ };
};
};
diff --git a/arch/arm/boot/dts/omap443x.dtsi b/arch/arm/boot/dts/omap443x.dtsi
index 8c1cfad..0adfa1d 100644
--- a/arch/arm/boot/dts/omap443x.dtsi
+++ b/arch/arm/boot/dts/omap443x.dtsi
@@ -43,6 +43,32 @@
#thermal-sensor-cells = <0>;
};
};
+
+ ocp {
+ abb_mpu: regulator-abb-mpu {
+ status = "okay";
+
+ reg = <0x4a307bd0 0x8>, <0x4a306014 0x4>;
+ reg-names = "base-address", "int-address";
+
+ ti,abb_info = <
+ /*uV ABB efuse rbb_m fbb_m vset_m*/
+ 1025000 0 0 0 0 0
+ 1200000 0 0 0 0 0
+ 1313000 0 0 0 0 0
+ 1375000 1 0 0 0 0
+ 1389000 1 0 0 0 0
+ >;
+ };
+
+ /* Default unused, just provide register info for record */
+ abb_iva: regulator-abb-iva {
+ reg = <0x4a307bd8 0x8>, <0x4a306010 0x4>;
+ reg-names = "base-address", "int-address";
+ };
+
+ };
+
};
/include/ "omap443x-clocks.dtsi"
diff --git a/arch/arm/boot/dts/omap4460.dtsi b/arch/arm/boot/dts/omap4460.dtsi
index 6b32f52..194f9ef 100644
--- a/arch/arm/boot/dts/omap4460.dtsi
+++ b/arch/arm/boot/dts/omap4460.dtsi
@@ -50,7 +50,44 @@
#thermal-sensor-cells = <0>;
};
+
+ abb_mpu: regulator-abb-mpu {
+ status = "okay";
+
+ reg = <0x4a307bd0 0x8>, <0x4a306014 0x4>,
+ <0x4A002268 0x4>;
+ reg-names = "base-address", "int-address",
+ "efuse-address";
+
+ ti,abb_info = <
+ /*uV ABB efuse rbb_m fbb_m vset_m*/
+ 1025000 0 0 0 0 0
+ 1200000 0 0 0 0 0
+ 1313000 0 0 0x100000 0x40000 0
+ 1375000 1 0 0 0 0
+ 1389000 1 0 0 0 0
+ >;
+ };
+
+ abb_iva: regulator-abb-iva {
+ status = "okay";
+
+ reg = <0x4a307bd8 0x8>, <0x4a306010 0x4>,
+ <0x4A002268 0x4>;
+ reg-names = "base-address", "int-address",
+ "efuse-address";
+
+ ti,abb_info = <
+ /*uV ABB efuse rbb_m fbb_m vset_m*/
+ 950000 0 0 0 0 0
+ 1140000 0 0 0 0 0
+ 1291000 0 0 0x200000 0 0
+ 1375000 1 0 0 0 0
+ 1376000 1 0 0 0 0
+ >;
+ };
};
+
};
/include/ "omap446x-clocks.dtsi"
--
1.9.0
^ permalink raw reply related [flat|nested] 13+ messages in thread* [RESEND Patch 6/9] ARM: dts: DRA7: Add device nodes for ABB
2014-03-03 14:50 [RESEND Patch 0/9] dts pending patches for TI omap Mugunthan V N
` (5 preceding siblings ...)
2014-03-03 14:50 ` [RESEND Patch 5/9] ARM: dts: OMAP4: Add device nodes " Mugunthan V N
@ 2014-03-03 14:50 ` Mugunthan V N
2014-03-03 14:50 ` [RESEND Patch 7/9] ARM: DTS: DRA7: Add crossbar device binding Mugunthan V N
` (3 subsequent siblings)
10 siblings, 0 replies; 13+ messages in thread
From: Mugunthan V N @ 2014-03-03 14:50 UTC (permalink / raw)
To: linux-arm-kernel
From: Nishanth Menon <nm@ti.com>
Add ABB device nodes for DRA7 family of devices. Data is based on
DRA7 Technical Reference Manual revision I (Sept 2013)
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
---
arch/arm/boot/dts/dra7.dtsi | 132 ++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 132 insertions(+)
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index 499974a..9e3caf3 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -578,6 +578,138 @@
status = "disabled";
};
+ abb_mpu: regulator-abb-mpu {
+ compatible = "ti,abb-v3";
+ regulator-name = "abb_mpu";
+ #address-cells = <0>;
+ #size-cells = <0>;
+ clocks = <&sys_clkin1>;
+ ti,settling-time = <50>;
+ ti,clock-cycles = <16>;
+
+ reg = <0x4ae07ddc 0x4>, <0x4ae07de0 0x4>,
+ <0x4ae06014 0x4>, <0x4a003b20 0x8>,
+ <0x4ae0c158 0x4>;
+ reg-names = "setup-address", "control-address",
+ "int-address", "efuse-address",
+ "ldo-address";
+ ti,tranxdone-status-mask = <0x80>;
+ /* LDOVBBMPU_FBB_MUX_CTRL */
+ ti,ldovbb-override-mask = <0x400>;
+ /* LDOVBBMPU_FBB_VSET_OUT */
+ ti,ldovbb-vset-mask = <0x1F>;
+
+ /*
+ * NOTE: only FBB mode used but actual vset will
+ * determine final biasing
+ */
+ ti,abb_info = <
+ /*uV ABB efuse rbb_m fbb_m vset_m*/
+ 1060000 0 0x0 0 0x02000000 0x01F00000
+ 1160000 0 0x4 0 0x02000000 0x01F00000
+ 1210000 0 0x8 0 0x02000000 0x01F00000
+ >;
+ };
+
+ abb_ivahd: regulator-abb-ivahd {
+ compatible = "ti,abb-v3";
+ regulator-name = "abb_ivahd";
+ #address-cells = <0>;
+ #size-cells = <0>;
+ clocks = <&sys_clkin1>;
+ ti,settling-time = <50>;
+ ti,clock-cycles = <16>;
+
+ reg = <0x4ae07e34 0x4>, <0x4ae07e24 0x4>,
+ <0x4ae06010 0x4>, <0x4a0025cc 0x8>,
+ <0x4a002470 0x4>;
+ reg-names = "setup-address", "control-address",
+ "int-address", "efuse-address",
+ "ldo-address";
+ ti,tranxdone-status-mask = <0x40000000>;
+ /* LDOVBBIVA_FBB_MUX_CTRL */
+ ti,ldovbb-override-mask = <0x400>;
+ /* LDOVBBIVA_FBB_VSET_OUT */
+ ti,ldovbb-vset-mask = <0x1F>;
+
+ /*
+ * NOTE: only FBB mode used but actual vset will
+ * determine final biasing
+ */
+ ti,abb_info = <
+ /*uV ABB efuse rbb_m fbb_m vset_m*/
+ 1055000 0 0x0 0 0x02000000 0x01F00000
+ 1150000 0 0x4 0 0x02000000 0x01F00000
+ 1250000 0 0x8 0 0x02000000 0x01F00000
+ >;
+ };
+
+ abb_dspeve: regulator-abb-dspeve {
+ compatible = "ti,abb-v3";
+ regulator-name = "abb_dspeve";
+ #address-cells = <0>;
+ #size-cells = <0>;
+ clocks = <&sys_clkin1>;
+ ti,settling-time = <50>;
+ ti,clock-cycles = <16>;
+
+ reg = <0x4ae07e30 0x4>, <0x4ae07e20 0x4>,
+ <0x4ae06010 0x4>, <0x4a0025e0 0x8>,
+ <0x4a00246c 0x4>;
+ reg-names = "setup-address", "control-address",
+ "int-address", "efuse-address",
+ "ldo-address";
+ ti,tranxdone-status-mask = <0x20000000>;
+ /* LDOVBBDSPEVE_FBB_MUX_CTRL */
+ ti,ldovbb-override-mask = <0x400>;
+ /* LDOVBBDSPEVE_FBB_VSET_OUT */
+ ti,ldovbb-vset-mask = <0x1F>;
+
+ /*
+ * NOTE: only FBB mode used but actual vset will
+ * determine final biasing
+ */
+ ti,abb_info = <
+ /*uV ABB efuse rbb_m fbb_m vset_m*/
+ 1055000 0 0x0 0 0x02000000 0x01F00000
+ 1150000 0 0x4 0 0x02000000 0x01F00000
+ 1250000 0 0x8 0 0x02000000 0x01F00000
+ >;
+ };
+
+ abb_gpu: regulator-abb-gpu {
+ compatible = "ti,abb-v3";
+ regulator-name = "abb_gpu";
+ #address-cells = <0>;
+ #size-cells = <0>;
+ clocks = <&sys_clkin1>;
+ ti,settling-time = <50>;
+ ti,clock-cycles = <16>;
+
+ reg = <0x4ae07de4 0x4>, <0x4ae07de8 0x4>,
+ <0x4ae06010 0x4>, <0x4a003b08 0x8>,
+ <0x4ae0c154 0x4>;
+ reg-names = "setup-address", "control-address",
+ "int-address", "efuse-address",
+ "ldo-address";
+ ti,tranxdone-status-mask = <0x10000000>;
+ /* LDOVBBGPU_FBB_MUX_CTRL */
+ ti,ldovbb-override-mask = <0x400>;
+ /* LDOVBBGPU_FBB_VSET_OUT */
+ ti,ldovbb-vset-mask = <0x1F>;
+
+ /*
+ * NOTE: only FBB mode used but actual vset will
+ * determine final biasing
+ */
+ ti,abb_info = <
+ /*uV ABB efuse rbb_m fbb_m vset_m*/
+ 1090000 0 0x0 0 0x02000000 0x01F00000
+ 1210000 0 0x4 0 0x02000000 0x01F00000
+ 1280000 0 0x8 0 0x02000000 0x01F00000
+ >;
+ };
+
mcspi1: spi at 48098000 {
compatible = "ti,omap4-mcspi";
reg = <0x48098000 0x200>;
--
1.9.0
^ permalink raw reply related [flat|nested] 13+ messages in thread* [RESEND Patch 7/9] ARM: DTS: DRA7: Add crossbar device binding
2014-03-03 14:50 [RESEND Patch 0/9] dts pending patches for TI omap Mugunthan V N
` (6 preceding siblings ...)
2014-03-03 14:50 ` [RESEND Patch 6/9] ARM: dts: DRA7: " Mugunthan V N
@ 2014-03-03 14:50 ` Mugunthan V N
2014-03-03 14:50 ` [RESEND Patch 8/9] ARM: DTS: DRA7: Replace peripheral interrupt numbers with crossbar inputs Mugunthan V N
` (2 subsequent siblings)
10 siblings, 0 replies; 13+ messages in thread
From: Mugunthan V N @ 2014-03-03 14:50 UTC (permalink / raw)
To: linux-arm-kernel
From: Sricharan R <r.sricharan@ti.com>
This adds the irq crossbar device node.
There is a IRQ crossbar device in the soc, which
maps the irq requests from the peripherals to the
mpu interrupt controller's inputs. The Peripheral irq
requests are connected to only one crossbar
input and the output of the crossbar is connected to only one
controller's input line. The crossbar device is used to map
a peripheral input to a free mpu's interrupt controller line.
Cc: Benoit Cousson <bcousson@baylibre.com>
Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
Cc: Rajendra Nayak <rnayak@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sricharan R <r.sricharan@ti.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
---
arch/arm/boot/dts/dra7.dtsi | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index 9e3caf3..88fc2eb 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -773,6 +773,14 @@
status = "disabled";
};
};
+
+ crossbar_mpu: crossbar at 4a020000 {
+ compatible = "ti,irq-crossbar";
+ reg = <0x4a002a48 0x130>;
+ ti,max-irqs = <160>;
+ ti,reg-size = <2>;
+ ti,irqs-reserved = <0 1 2 3 5 6 131 132 139 140>;
+ };
};
/include/ "dra7xx-clocks.dtsi"
--
1.9.0
^ permalink raw reply related [flat|nested] 13+ messages in thread* [RESEND Patch 8/9] ARM: DTS: DRA7: Replace peripheral interrupt numbers with crossbar inputs
2014-03-03 14:50 [RESEND Patch 0/9] dts pending patches for TI omap Mugunthan V N
` (7 preceding siblings ...)
2014-03-03 14:50 ` [RESEND Patch 7/9] ARM: DTS: DRA7: Add crossbar device binding Mugunthan V N
@ 2014-03-03 14:50 ` Mugunthan V N
2014-03-03 14:50 ` [RESEND Patch 9/9] ARM: DTS: DRA7: Add routable-irqs property for gic node Mugunthan V N
2014-03-05 19:50 ` [RESEND Patch 0/9] dts pending patches for TI omap Tony Lindgren
10 siblings, 0 replies; 13+ messages in thread
From: Mugunthan V N @ 2014-03-03 14:50 UTC (permalink / raw)
To: linux-arm-kernel
From: Sricharan R <r.sricharan@ti.com>
Now with the crossbar IP in picture, the peripherals do not have the
fixed interrupt lines. Instead they rely on the crossbar irqchip to
allocate and map a free interrupt line to its crossbar input. So replacing
all the peripheral interrupt numbers with its fixed crossbar input lines.
Cc: Benoit Cousson <bcousson@baylibre.com>
Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
Cc: Rajendra Nayak <rnayak@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sricharan R <r.sricharan@ti.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
---
arch/arm/boot/dts/dra7.dtsi | 86 ++++++++++++++++++++++-----------------------
1 file changed, 43 insertions(+), 43 deletions(-)
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index 88fc2eb..2bd3a9a 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -166,10 +166,10 @@
sdma: dma-controller at 4a056000 {
compatible = "ti,omap4430-sdma";
reg = <0x4a056000 0x1000>;
- interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
#dma-cells = <1>;
#dma-channels = <32>;
#dma-requests = <127>;
@@ -178,7 +178,7 @@
gpio1: gpio at 4ae10000 {
compatible = "ti,omap4-gpio";
reg = <0x4ae10000 0x200>;
- interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "gpio1";
gpio-controller;
#gpio-cells = <2>;
@@ -189,7 +189,7 @@
gpio2: gpio at 48055000 {
compatible = "ti,omap4-gpio";
reg = <0x48055000 0x200>;
- interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "gpio2";
gpio-controller;
#gpio-cells = <2>;
@@ -200,7 +200,7 @@
gpio3: gpio at 48057000 {
compatible = "ti,omap4-gpio";
reg = <0x48057000 0x200>;
- interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "gpio3";
gpio-controller;
#gpio-cells = <2>;
@@ -211,7 +211,7 @@
gpio4: gpio at 48059000 {
compatible = "ti,omap4-gpio";
reg = <0x48059000 0x200>;
- interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "gpio4";
gpio-controller;
#gpio-cells = <2>;
@@ -222,7 +222,7 @@
gpio5: gpio at 4805b000 {
compatible = "ti,omap4-gpio";
reg = <0x4805b000 0x200>;
- interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "gpio5";
gpio-controller;
#gpio-cells = <2>;
@@ -233,7 +233,7 @@
gpio6: gpio at 4805d000 {
compatible = "ti,omap4-gpio";
reg = <0x4805d000 0x200>;
- interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "gpio6";
gpio-controller;
#gpio-cells = <2>;
@@ -244,7 +244,7 @@
gpio7: gpio at 48051000 {
compatible = "ti,omap4-gpio";
reg = <0x48051000 0x200>;
- interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "gpio7";
gpio-controller;
#gpio-cells = <2>;
@@ -255,7 +255,7 @@
gpio8: gpio at 48053000 {
compatible = "ti,omap4-gpio";
reg = <0x48053000 0x200>;
- interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "gpio8";
gpio-controller;
#gpio-cells = <2>;
@@ -266,7 +266,7 @@
uart1: serial at 4806a000 {
compatible = "ti,omap4-uart";
reg = <0x4806a000 0x100>;
- interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart1";
clock-frequency = <48000000>;
status = "disabled";
@@ -275,7 +275,7 @@
uart2: serial at 4806c000 {
compatible = "ti,omap4-uart";
reg = <0x4806c000 0x100>;
- interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart2";
clock-frequency = <48000000>;
status = "disabled";
@@ -284,7 +284,7 @@
uart3: serial at 48020000 {
compatible = "ti,omap4-uart";
reg = <0x48020000 0x100>;
- interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart3";
clock-frequency = <48000000>;
status = "disabled";
@@ -293,7 +293,7 @@
uart4: serial at 4806e000 {
compatible = "ti,omap4-uart";
reg = <0x4806e000 0x100>;
- interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart4";
clock-frequency = <48000000>;
status = "disabled";
@@ -302,7 +302,7 @@
uart5: serial at 48066000 {
compatible = "ti,omap4-uart";
reg = <0x48066000 0x100>;
- interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart5";
clock-frequency = <48000000>;
status = "disabled";
@@ -311,7 +311,7 @@
uart6: serial at 48068000 {
compatible = "ti,omap4-uart";
reg = <0x48068000 0x100>;
- interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart6";
clock-frequency = <48000000>;
status = "disabled";
@@ -352,7 +352,7 @@
timer1: timer at 4ae18000 {
compatible = "ti,omap5430-timer";
reg = <0x4ae18000 0x80>;
- interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "timer1";
ti,timer-alwon;
};
@@ -360,28 +360,28 @@
timer2: timer at 48032000 {
compatible = "ti,omap5430-timer";
reg = <0x48032000 0x80>;
- interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "timer2";
};
timer3: timer at 48034000 {
compatible = "ti,omap5430-timer";
reg = <0x48034000 0x80>;
- interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "timer3";
};
timer4: timer at 48036000 {
compatible = "ti,omap5430-timer";
reg = <0x48036000 0x80>;
- interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "timer4";
};
timer5: timer at 48820000 {
compatible = "ti,omap5430-timer";
reg = <0x48820000 0x80>;
- interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "timer5";
ti,timer-dsp;
};
@@ -389,7 +389,7 @@
timer6: timer at 48822000 {
compatible = "ti,omap5430-timer";
reg = <0x48822000 0x80>;
- interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "timer6";
ti,timer-dsp;
ti,timer-pwm;
@@ -398,7 +398,7 @@
timer7: timer at 48824000 {
compatible = "ti,omap5430-timer";
reg = <0x48824000 0x80>;
- interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "timer7";
ti,timer-dsp;
};
@@ -406,7 +406,7 @@
timer8: timer at 48826000 {
compatible = "ti,omap5430-timer";
reg = <0x48826000 0x80>;
- interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "timer8";
ti,timer-dsp;
ti,timer-pwm;
@@ -415,21 +415,21 @@
timer9: timer at 4803e000 {
compatible = "ti,omap5430-timer";
reg = <0x4803e000 0x80>;
- interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "timer9";
};
timer10: timer at 48086000 {
compatible = "ti,omap5430-timer";
reg = <0x48086000 0x80>;
- interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "timer10";
};
timer11: timer at 48088000 {
compatible = "ti,omap5430-timer";
reg = <0x48088000 0x80>;
- interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "timer11";
ti,timer-pwm;
};
@@ -465,7 +465,7 @@
wdt2: wdt at 4ae14000 {
compatible = "ti,omap4-wdt";
reg = <0x4ae14000 0x80>;
- interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "wd_timer2";
};
@@ -486,7 +486,7 @@
i2c1: i2c at 48070000 {
compatible = "ti,omap4-i2c";
reg = <0x48070000 0x100>;
- interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "i2c1";
@@ -496,7 +496,7 @@
i2c2: i2c at 48072000 {
compatible = "ti,omap4-i2c";
reg = <0x48072000 0x100>;
- interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "i2c2";
@@ -506,7 +506,7 @@
i2c3: i2c at 48060000 {
compatible = "ti,omap4-i2c";
reg = <0x48060000 0x100>;
- interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "i2c3";
@@ -516,7 +516,7 @@
i2c4: i2c at 4807a000 {
compatible = "ti,omap4-i2c";
reg = <0x4807a000 0x100>;
- interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "i2c4";
@@ -526,7 +526,7 @@
i2c5: i2c at 4807c000 {
compatible = "ti,omap4-i2c";
reg = <0x4807c000 0x100>;
- interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "i2c5";
@@ -536,7 +536,7 @@
mmc1: mmc at 4809c000 {
compatible = "ti,omap4-hsmmc";
reg = <0x4809c000 0x400>;
- interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "mmc1";
ti,dual-volt;
ti,needs-special-reset;
@@ -548,7 +548,7 @@
mmc2: mmc at 480b4000 {
compatible = "ti,omap4-hsmmc";
reg = <0x480b4000 0x400>;
- interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "mmc2";
ti,needs-special-reset;
dmas = <&sdma 47>, <&sdma 48>;
@@ -559,7 +559,7 @@
mmc3: mmc at 480ad000 {
compatible = "ti,omap4-hsmmc";
reg = <0x480ad000 0x400>;
- interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "mmc3";
ti,needs-special-reset;
dmas = <&sdma 77>, <&sdma 78>;
@@ -570,7 +570,7 @@
mmc4: mmc at 480d1000 {
compatible = "ti,omap4-hsmmc";
reg = <0x480d1000 0x400>;
- interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "mmc4";
ti,needs-special-reset;
dmas = <&sdma 57>, <&sdma 58>;
@@ -713,7 +713,7 @@
mcspi1: spi at 48098000 {
compatible = "ti,omap4-mcspi";
reg = <0x48098000 0x200>;
- interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "mcspi1";
@@ -734,7 +734,7 @@
mcspi2: spi at 4809a000 {
compatible = "ti,omap4-mcspi";
reg = <0x4809a000 0x200>;
- interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "mcspi2";
@@ -750,7 +750,7 @@
mcspi3: spi at 480b8000 {
compatible = "ti,omap4-mcspi";
reg = <0x480b8000 0x200>;
- interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "mcspi3";
@@ -763,7 +763,7 @@
mcspi4: spi at 480ba000 {
compatible = "ti,omap4-mcspi";
reg = <0x480ba000 0x200>;
- interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "mcspi4";
--
1.9.0
^ permalink raw reply related [flat|nested] 13+ messages in thread* [RESEND Patch 9/9] ARM: DTS: DRA7: Add routable-irqs property for gic node
2014-03-03 14:50 [RESEND Patch 0/9] dts pending patches for TI omap Mugunthan V N
` (8 preceding siblings ...)
2014-03-03 14:50 ` [RESEND Patch 8/9] ARM: DTS: DRA7: Replace peripheral interrupt numbers with crossbar inputs Mugunthan V N
@ 2014-03-03 14:50 ` Mugunthan V N
2014-03-05 19:50 ` [RESEND Patch 0/9] dts pending patches for TI omap Tony Lindgren
10 siblings, 0 replies; 13+ messages in thread
From: Mugunthan V N @ 2014-03-03 14:50 UTC (permalink / raw)
To: linux-arm-kernel
From: Sricharan R <r.sricharan@ti.com>
There is a IRQ crossbar device in the soc, which maps the
irq requests from the peripherals to the mpu interrupt
controller's inputs. The gic provides the support for such
IPs in the form of routable-irqs. So adding the property
here to gic node.
Cc: Benoit Cousson <bcousson@baylibre.com>
Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
Cc: Rajendra Nayak <rnayak@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sricharan R <r.sricharan@ti.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
---
arch/arm/boot/dts/dra7.dtsi | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index 2bd3a9a..824e316 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -72,6 +72,7 @@
compatible = "arm,cortex-a15-gic";
interrupt-controller;
#interrupt-cells = <3>;
+ arm,routable-irqs = <160>;
reg = <0x48211000 0x1000>,
<0x48212000 0x1000>,
<0x48214000 0x2000>,
--
1.9.0
^ permalink raw reply related [flat|nested] 13+ messages in thread* [RESEND Patch 0/9] dts pending patches for TI omap
2014-03-03 14:50 [RESEND Patch 0/9] dts pending patches for TI omap Mugunthan V N
` (9 preceding siblings ...)
2014-03-03 14:50 ` [RESEND Patch 9/9] ARM: DTS: DRA7: Add routable-irqs property for gic node Mugunthan V N
@ 2014-03-05 19:50 ` Tony Lindgren
2014-03-06 4:33 ` Sricharan R
10 siblings, 1 reply; 13+ messages in thread
From: Tony Lindgren @ 2014-03-05 19:50 UTC (permalink / raw)
To: linux-arm-kernel
* Mugunthan V N <mugunthanvnm@ti.com> [140303 06:53]:
> Benoit/Tony
>
> Here I am send all the pending dt patches that can go into 3.15 merge window,
> all the patches were already posted to mailing list and has beed reviewed.
>
> I have rebased the patches on top of
> git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap.git omap-for-v3.15/dt
> and fixed all the merge conflicts.
>
> Pasting the mail archive for the patches series
>
> * Add ABB device nodes
> http://linux-kernel.2935.n7.nabble.com/PATCH-0-4-ARM-dts-OMAP3630-Add-ABB-device-nodes-td794852.html
>
> * MMC hot plug support
> http://mail.blameitonlove.com/lists/linux-omap/msg101933.html
> Dropped [PATCH 2/3] ARM: dts: am335x-evmsk: add SD card hotplug support as this
> is already merged with commit id 29ea5efb0bb612d352aa360de26e2095cb230e4a
>
> * DRA7 Cross bar DTS patches
> Cross bar driver has been pulled for next merge, so the dts patches can also
> be pulled for next merge window.
>
> Here is the pull request for the same patch series.
>
> The following changes since commit f777ba1780584b100ab9664cc06d04f3bb273a84:
>
> Merge tag 'for_3.15/dts_signed' of git://git.kernel.org/pub/scm/linux/kernel/git/bcousson/linux-omap-dt into omap-for-v3.15/dt (2014-03-02 14:22:03 -0800)
>
> are available in the git repository at:
>
>
> git://git.ti.com/~mugunthanvnm/ti-linux-kernel/linux.git omapdt-for-3.15
>
> for you to fetch changes up to 5f78b45aa45c5b2c4de895c3b0740fda4684dae4:
>
> ARM: DTS: DRA7: Add routable-irqs property for gic node (2014-03-03 19:53:25 +0530)
Thanks applying all except for the crossbar ones into
omap-for-v3.15/dt.
Please resend the last three patches once the dependencies
are merged to mainline kernel as otherwise the interrupt
nubers are all wrong without the crossbar driver related
code.
Regards,
Tony
^ permalink raw reply [flat|nested] 13+ messages in thread* [RESEND Patch 0/9] dts pending patches for TI omap
2014-03-05 19:50 ` [RESEND Patch 0/9] dts pending patches for TI omap Tony Lindgren
@ 2014-03-06 4:33 ` Sricharan R
0 siblings, 0 replies; 13+ messages in thread
From: Sricharan R @ 2014-03-06 4:33 UTC (permalink / raw)
To: linux-arm-kernel
On Thursday 06 March 2014 01:20 AM, Tony Lindgren wrote:
> * Mugunthan V N <mugunthanvnm@ti.com> [140303 06:53]:
>> Benoit/Tony
>>
>> Here I am send all the pending dt patches that can go into 3.15 merge window,
>> all the patches were already posted to mailing list and has beed reviewed.
>>
>> I have rebased the patches on top of
>> git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap.git omap-for-v3.15/dt
>> and fixed all the merge conflicts.
>>
>> Pasting the mail archive for the patches series
>>
>> * Add ABB device nodes
>> http://linux-kernel.2935.n7.nabble.com/PATCH-0-4-ARM-dts-OMAP3630-Add-ABB-device-nodes-td794852.html
>>
>> * MMC hot plug support
>> http://mail.blameitonlove.com/lists/linux-omap/msg101933.html
>> Dropped [PATCH 2/3] ARM: dts: am335x-evmsk: add SD card hotplug support as this
>> is already merged with commit id 29ea5efb0bb612d352aa360de26e2095cb230e4a
>>
>> * DRA7 Cross bar DTS patches
>> Cross bar driver has been pulled for next merge, so the dts patches can also
>> be pulled for next merge window.
>>
>> Here is the pull request for the same patch series.
>>
>> The following changes since commit f777ba1780584b100ab9664cc06d04f3bb273a84:
>>
>> Merge tag 'for_3.15/dts_signed' of git://git.kernel.org/pub/scm/linux/kernel/git/bcousson/linux-omap-dt into omap-for-v3.15/dt (2014-03-02 14:22:03 -0800)
>>
>> are available in the git repository at:
>>
>>
>> git://git.ti.com/~mugunthanvnm/ti-linux-kernel/linux.git omapdt-for-3.15
>>
>> for you to fetch changes up to 5f78b45aa45c5b2c4de895c3b0740fda4684dae4:
>>
>> ARM: DTS: DRA7: Add routable-irqs property for gic node (2014-03-03 19:53:25 +0530)
>
> Thanks applying all except for the crossbar ones into
> omap-for-v3.15/dt.
>
> Please resend the last three patches once the dependencies
> are merged to mainline kernel as otherwise the interrupt
> nubers are all wrong without the crossbar driver related
> code.
Ok, i will resend when the dependencies are merged
Regards,
Sricharan
^ permalink raw reply [flat|nested] 13+ messages in thread