From mboxrd@z Thu Jan 1 00:00:00 1970 From: ezequiel.garcia@free-electrons.com (Ezequiel Garcia) Date: Thu, 13 Mar 2014 17:04:10 -0300 Subject: [PATCH v2 5/6] ARM: mvebu: Enable NAND controller in Armada 385-DB In-Reply-To: <53221AD4.3090002@cogentembedded.com> References: <1394739542-30017-1-git-send-email-ezequiel@vanguardiasur.com.ar> <1394739542-30017-6-git-send-email-ezequiel@vanguardiasur.com.ar> <53221AD4.3090002@cogentembedded.com> Message-ID: <20140313200410.GA30590@arch.cereza> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Mar 13, Sergei Shtylyov wrote: > On 03/13/2014 10:39 PM, Ezequiel Garcia wrote: > > >From: Ezequiel Garcia > > >The Armada 385-DB board has a NAND flash, so enable it in the > >devicetree and add the partitions as prepared in the factory images. > > >Signed-off-by: Ezequiel Garcia > >--- > > arch/arm/boot/dts/armada-385-db.dts | 21 +++++++++++++++++++++ > > 1 file changed, 21 insertions(+) > > >diff --git a/arch/arm/boot/dts/armada-385-db.dts b/arch/arm/boot/dts/armada-385-db.dts > >index 9a13642..edcf7ff 100644 > >--- a/arch/arm/boot/dts/armada-385-db.dts > >+++ b/arch/arm/boot/dts/armada-385-db.dts > >@@ -80,6 +80,27 @@ > > reg = <1>; > > }; > > }; > >+ > >+ flash: flash at d0000 { > > Note that you don't have to label your device the same way as it's named, > i.e. you could have labelled it "nand" if it would make things clearer. Right. > Although I don't readily see the value of labeling nodes in the board's > .dts file. Do you really expect to refer to it somewhere? > Yeah, I was thinking the same thing just after I sent this. No, I don't think we need the label. -- Ezequiel Garc?a, Free Electrons Embedded Linux, Kernel and Android Engineering http://free-electrons.com