From mboxrd@z Thu Jan 1 00:00:00 1970 From: moinejf@free.fr (Jean-Francois Moine) Date: Thu, 20 Mar 2014 14:52:21 +0100 Subject: [PATCH] ASoC: tda998x: Fix lack of required reg in DT documentation In-Reply-To: <532AEDE2.3080306@gmail.com> References: <20140320092639.48F68A6279@smtp3-g21.free.fr> <532ADFD8.80301@gmail.com> <20140320140156.5d768b1f@armhf> <532AEDE2.3080306@gmail.com> Message-ID: <20140320145221.09252bf6@armhf> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Thu, 20 Mar 2014 14:32:18 +0100 Sebastian Hesselbarth wrote: > Ok, I had another round of google'ing and found this: > http://hipstercircuits.com/wp-content/uploads/2013/05/TDA19988.pdf > > There, the datasheet specifically for TDA19988 only states 0x70 and > 0x34 as the two i2c addresses. Therefore, TDA19988 has fixed i2c > addresses while TDA9983b has configurable (main) i2c address. > > Not as easy as we thought ;) > > I suggest reword the reg property to: > "- reg: shall be set to the I2C address" > > and optionally list all known addresses for each TDA[1]998x in the > binding. Thanks for the link. OK, then, as the linux tda998x driver handles only the tda 19988 and 19989 chips, the HDMI I2C address is always 0x70. So, question: Russell and Sebastian, do you still want an other patch? Other question: the CEC address is hard-coded to 0x34 in the driver. Should it be configurable in the DT? -- Ken ar c'henta? | ** Breizh ha Linux atav! ** Jef | http://moinejf.free.fr/