Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: computersforpeace@gmail.com (Brian Norris)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/3] mtd: davinci-nand: add dts property for NAND_NO_SUBPAGE_WRITE option
Date: Thu, 20 Mar 2014 10:29:12 -0700	[thread overview]
Message-ID: <20140320172912.GW31517@norris-Latitude-E6410> (raw)
In-Reply-To: <532B2183.2080309@ti.com>

On Thu, Mar 20, 2014 at 01:12:35PM -0400, Santosh Shilimkar wrote:
> Boris,

Who's Boris? And why should Boris be taking this patch? It's an MTD
patch.

> On Thursday 20 March 2014 01:06 PM, Ivan Khoronzhuk wrote:
> > From: Murali Karicheri <m-karicheri2@ti.com>
> > 
> > After testing NAND flash with ubifs for k2hk-emv board were committed
> > that flash doesn't support subpage writing, so we can fix it by
> > adding a property to disable subpage write.

What flash? We try to autodetect NAND as much as possible. Perhaps we
should be adding infrastructure support instead of hacking it with a DT
property.

> > Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
> > Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
> > ---
> Can you please pick this up for 3.15 fixes ? Ofcourse assuming DT folks
> are ok with the patch.
> 
> I can then take patch 1/3 and 3/3 in my 3.15 fixes queue.
> 
> >  Documentation/devicetree/bindings/mtd/davinci-nand.txt | 2 ++
> >  drivers/mtd/nand/davinci_nand.c                        | 3 +++
> >  2 files changed, 5 insertions(+)
> > 
> > diff --git a/Documentation/devicetree/bindings/mtd/davinci-nand.txt b/Documentation/devicetree/bindings/mtd/davinci-nand.txt
> > index cfb18ab..50af930 100644
> > --- a/Documentation/devicetree/bindings/mtd/davinci-nand.txt
> > +++ b/Documentation/devicetree/bindings/mtd/davinci-nand.txt
> > @@ -53,6 +53,8 @@ Recommended properties :
> >  				identifier is saved in OOB area. If not present
> >  				false.
> >  
> > +- ti,davinci-nosubpage-write:	disable subpage write for the device

If we really need the DT property, I'd prefer a generic
"nand-numer-of-partial-programs" or something like that, and if it's
equal to 1, then the flash doesn't support partial page programming.

But I'd prefer not to encode that in DT if possible.

> >  Deprecated properties:
> >  
> >  - ti,davinci-ecc-mode:		operation mode of the NAND ecc mode. ECC mode
> > diff --git a/drivers/mtd/nand/davinci_nand.c b/drivers/mtd/nand/davinci_nand.c
> > index 4615d79..3ba058d 100644
> > --- a/drivers/mtd/nand/davinci_nand.c
> > +++ b/drivers/mtd/nand/davinci_nand.c
> > @@ -581,6 +581,9 @@ static struct davinci_nand_pdata
> >  		    of_property_read_bool(pdev->dev.of_node,
> >  			"ti,davinci-nand-use-bbt"))
> >  			pdata->bbt_options = NAND_BBT_USE_FLASH;
> > +		if (of_property_read_bool(pdev->dev.of_node,
> > +			"ti,davinci-no-subpage-write"))
> > +			pdata->options |= NAND_NO_SUBPAGE_WRITE;
> >  	}
> >  
> >  	return dev_get_platdata(&pdev->dev);
> > 
> 

Brian

  reply	other threads:[~2014-03-20 17:29 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-03-20 17:06 [PATCH 0/3] Fix NAND propeties for k2hk-evm Ivan Khoronzhuk
2014-03-20 17:06 ` [PATCH 1/3] ARM: dts: k2hk-evm: set ubifs partition size for 512M NAND Ivan Khoronzhuk
2014-03-20 17:06 ` [PATCH 2/3] mtd: davinci-nand: add dts property for NAND_NO_SUBPAGE_WRITE option Ivan Khoronzhuk
2014-03-20 17:12   ` Santosh Shilimkar
2014-03-20 17:29     ` Brian Norris [this message]
2014-03-20 17:37       ` Santosh Shilimkar
2014-03-20 17:44         ` Warner Losh
2014-03-20 18:02           ` Santosh Shilimkar
2014-03-20 18:09             ` Warner Losh
2014-03-20 18:54             ` Brian Norris
2014-03-20 19:11               ` Santosh Shilimkar
2014-03-20 19:26                 ` Ivan Khoronzhuk
2014-03-20 19:28                   ` Santosh Shilimkar
2014-03-20 18:42         ` Brian Norris
2014-03-20 17:06 ` [PATCH 3/3] ARM: dts: k2hk-evm: disable subpage write for davinci nand device Ivan Khoronzhuk

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20140320172912.GW31517@norris-Latitude-E6410 \
    --to=computersforpeace@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox